AFX ACC096 Ranger Front Basket Instruction Manual
- October 30, 2023
- AFX
Table of Contents
FRONTAL RACK
INSTALLATION MANUAL
POLARIS RANGER 570
2015 – 2022
ACC096
THANK YOU!
FOR PURCHASING AT AFX MOTORSPORTS
FRONTAL RACK
FOR POLARIS RANGER 2021
HOW TO INSTALL
| Hardware: | Tools needed (Not Included): |
|---|
(19x) Screw 1/4” x 1/2”
(8x) Screw 1/4” x 3/4”
(27x) Lock Nut 1/4”| 5/32” Allen Key
7/16” Combination Wrench
Liability Statement
AF1 Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports roducts could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.
-
Attach the front plates, cornerback plates, to the base whit the screws and then attach the clam plates to the lateral plates and unite them to the base.
-
Place the rack on the front of the vehicle, use the allen key to screw it into the holes with 3/4 screws and secure the screws with the locknut.
-
Verify that the rack is well secured on both sides and that they are securely attached to the vehicle.
Now you have completed the installation.
For technical support , please write us to:
info@afxmotorsports.com or call us at:
Ph. 956-242-6521
HAVE FUN AND A SAFE RIDE!
www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041 Ph. 956-242-6521
THIS PRODUCT IS FOR OFF ROAD USE ONLY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>