V I V O MOUNT-KB05-4D Clamp On Keyboard Tray with Pencil Drawer Instruction Manual

October 30, 2023
V I V O

MOUNT-KB05-4D Clamp On Keyboard Tray with Pencil Drawer
Instruction ManualV I V O MOUNT KB05 4D Clamp On Keyboard Tray with
Pencil Drawer

MOUNT-KB05-4D Clamp On Keyboard Tray with Pencil Drawer

SKU: MOUNT-KB05-4D
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.

V I V O MOUNT KB05 4D Clamp On Keyboard Tray with Pencil Drawer - Qr
Codehttps://vivo- us.com/products/mount-kb05-4d

GET IN TOUCH
Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

V I V O MOUNT KB05 4D Clamp On Keyboard Tray with Pencil Drawer - PACKAGE
CONTENTS

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
TOOLS NEEDED

DO NOT EXCEED WEIGHT CAPACITY
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1
Assemble Slider Brackets (C) to Clamps (E) using M4x7mm Screws (S-A). Tighten with a Phillips screwdriver.

V I V O MOUNT KB05 4D Clamp On Keyboard Tray with Pencil Drawer -
Assemble

STEP 2
Assemble the slider brackets with clamps to Keyboard Tray (A) using M5x12mm Screws (S-B), and tighten with a Phillips screwdriver. The clamps must be on the opposite end from the center cable guide.

V I V O MOUNT KB05 4D Clamp On Keyboard Tray with Pencil Drawer - Assemble
1

STEP 3
Slide Pencil Drawer (B) back into the open ends of Drawer Sliders (F) until they are latched together.

V I V O MOUNT KB05 4D Clamp On Keyboard Tray with Pencil Drawer - Assemble
2

STEP 4
Mount assembled Pencil Drawer (B) to the underside of Keyboard Tray (A) using ST5x12mm Screws (S-C) with a Phillips screwdriver.

V I V O MOUNT KB05 4D Clamp On Keyboard Tray with Pencil Drawer - Assemble
3

STEP 5
Place Pads (D) on the underside of Clamp (E). Place the assembled keyboard mount on the edge of the desk and tighten Clamps (E).
NOTE: To ensure keyboard tray is level, do not over-tighten Clamps (E).

V I V O MOUNT KB05 4D Clamp On Keyboard Tray with Pencil Drawer - Assemble
4

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo- us.com
LAST UPDATED: 04/15/2022
REV1

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

V I V O User Manuals

Related Manuals