V I V O MOUNT-M-FD37B Flip Down Ceiling TV and Monitor Mount Instruction Manual

: October 30, 2023
: V I V O

Table of Contents

MOUNT-M-FD37B Flip Down Ceiling TV and Monitor Mount
PACKAGE CONTENTS
ASSEMBLY STEPS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MOUNT-M-FD37B Flip Down Ceiling TV and Monitor Mount
Instruction Manual V I V O MOUNT M FD37B Flip Down Ceiling TV and
Monitor Mount

MOUNT-M-FD37B Flip Down Ceiling TV and Monitor Mount

SKU: MOUNT-M-FD37B
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.

https://vivo-us.com/products/mount-m-fd37b

GET IN TOUCH
Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

PACKAGE CONTENTS

V I V O MOUNT M FD37B Flip Down Ceiling TV and Monitor Mount - PACKAGE
CONTENTS

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR CEILING CONSTRUCTION. USE WOOD STUDS TO MOUNT. We include mounting for concrete ceilings as well. If unsure, please contact us at vivo-us. com, email at help@vivo-us.com, or call us at 309-278-5303
TOOLS NEEDED

V I V O MOUNT M FD37B Flip Down Ceiling TV and Monitor Mount -
TOOLS

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

ASSEMBLY STEPS

STEP 1
Push arm against ceiling plate of Mount (A) to release lock and rotate the arm.

V I V O MOUNT M FD37B Flip Down Ceiling TV and Monitor Mount - ASSEMBLY
STEPS

STEP 2
Using 4mm Allen Wrench (T-A), loosen the screws to the VESA plate height adjustment so the VESA plate can freely move.

V I V O MOUNT M FD37B Flip Down Ceiling TV and Monitor Mount - ASSEMBLY
STEPS 1

STEP 3

OPTION A: Wood Beam Ceiling
Hold Mount (A) to mounting surface and mark drill holes with pencil. Drill 2.5” (64mm) deep holes sing a 1/8” (3mm) drill bit. Insert M6x60mm Screws (W-A) into front two holes, leaving 3mm of thread exposed. Slide Mount (A) onto front two screws. Insert M6x60mm Screws (W-A) with M6.5mm Washer (W-C) into back two holes. Tighten all screws.
(NOTE: Wood beam must have a width of at least 5” to properly support the mount)

| OPTION B: Concrete Ceiling
Hold Mount (A) to mounting surface and mark drill holes with pencil. Drill 2.5” (64mm) deep holes using a 5/16” (8mm) drill bit. Insert Anchors (W-B). Insert M6x60mm Screws (W-A) into front two holes, leaving 3mm of thread exposed. Slide Mount (A) onto front two screws. Insert M6x60mm Screws (W-A) with M6.5mm Washers (W-C) into back two holes. Tighten all screws.
---|---
V I V O MOUNT M FD37B Flip Down Ceiling TV and Monitor Mount - ASSEMBLY
STEPS 2 | V I V O
MOUNT M FD37B Flip Down Ceiling TV and Monitor Mount - ASSEMBLY STEPS
3

STEP 4
Loosely install Screws (M-A through M-D) (depending on your TV’s needs) into the top two holes of the TV. Leave about 0.25” (6mm) sticking out of the TV.
V I V O MOUNT M FD37B Flip Down Ceiling TV and Monitor Mount - ASSEMBLY
STEPS 4 STEP 5
Install the TV onto Mount (A) using the keyholes. Install the remaining two Screws (M-A through M-D). Fully tighten all screws using a Phillips screwdriver.

V I V O MOUNT M FD37B Flip Down Ceiling TV and Monitor Mount - ASSEMBLY
STEPS 5

STEP 6
Tighten VESA plate height adjustment bolts using the 4mm Allen Wrench (T-A) once positioned at desired height. Adjust swivel hinge with 6mm Allen Wrench (T-B).
Push the TV all the way up to the ceiling to engage the lock, securing the TV in the raised position. Push up again to disengage the lock and lower the TV.

V I V O MOUNT M FD37B Flip Down Ceiling TV and Monitor Mount - ASSEMBLY
STEPS 6

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr