TOMADO TWM8001W Washing Machine Instruction Manual

: October 30, 2023
: TOMADO

TOMADO TWM8001W Washing Machine

TWM8001W

Product Description: The TWM8001W is a washing machine that has been in production since 1923 and is known for its quality, excellent service, and being the best choice.

Product Information

Model: TWM8001W
Languages: NL (Dutch), EN (English), DE (German), FR (French)
Pages: 3-101
Symbols used: Information, advice, tip or recommendation; General danger; Warning; Danger of electric shock; Dangerously hot surface; Fire hazard
Product Dimensions: 10 parts including a top plate, control panel, power cord, drum, pump filter, water drain hose, adjustable feet, door, detergent drawer, and water inlet hose
Accessories: 4 x caps, 1 x water inlet hose, 1 x user manual for cold water

Product Usage Instructions

Electric Installation

Connect the washing machine to a grounded outlet that is protected.
Only the manufacturer, maintenance representative or an authorized person should replace a damaged power cord.
Never use an extension cord or multiple plugs to connect the washing machine.
Do not unplug the washing machine if there is flammable gas nearby.
Do not use detergent containing solvents as this may release toxic fumes, damage the appliance, and cause fire and explosion hazards.

Installation and Connection

The space where the washing machine is placed must meet specific requirements.
Remove the cardboard and foam from the washing machine.
Lift the washing machine and remove the packaging material underneath. Make sure to remove the small triangular piece of foam [A] at the same time as the packaging material.
If this is not possible, lay the appliance on its side and remove it by hand.
Handle with care.
Remove the tape that secures the power cord and water drain hose.
Remove the water inlet hose from the drum.
Before using the washing machine for the first time, remove the transport bolts at the back of the appliance to avoid damage.
Remove the bolts, including the rubber parts, and keep them for future use. Cover the openings with caps.
Use a level and wrench to level the washing machine. Adjust the adjustable feet until the washing machine is level, then tighten the locking nuts with a wrench.

Symbols used in this document

TOMADO-TWM8001W-Washing-Machine-
FIG-1

SAFETY INSTRUCTIONS

Please read these instructions before operating the appliance and retain for future use.
Please, do not use the washing machine without reading the instructions for use first.
Check for any damage to the packaging or the appliance during transportation. Never use a damaged appliance, but contact your supplier.
Failure to observe the instructions for use or inapproriate use of the appliance may result in damage to the laundry or the appliance, or injury to the user. Keep the instruction manual handy, near the appliance.

INSTALLATION LOCATION AND SURROUNDING

Keep the appliance clear from heat sources and direct sunlight to avoid plastic and rubber parts to corrode.
Do not install the appliance in a room where the temperature can drop below 5°C, as the parts of the appliance may be damaged in case of water freezing.
Do not install the appliance in humid environments or rooms containing explosive or caustic gas. In case of water leakage or water splashes let the appliance dry in the open air.
Never use flammable sprays or substances in the immediate proximity of the appliance.

INSTALLATION

Place the appliance on a level and stable solid (concrete) base.
Adjust the appliances adjustable feet to ensure the appliance is standing level and balanced.
Before the first use of the appliance, remove the transport bolts, as switching on a blocked appliance can result in serious damage. The manufacturer will not be responsible for any damage in cases of such damage.
Before connecting the appliance to the power mains, wait for at least 2 hours until it reaches room temperature.
The door cannot be opened during washing machine operation.
Before washing clothes for the first time, the appliance shall be operated once with a full programme without any clothes inside.
After the washing cycle, close the water tap and pull out the plug from the power socket. Never pull the cord itself.
Dispose the packing materials according to local regulations. Keep the material out of reach of children. Danger of suffocation.
Before using the appliance, it must be calibrated. Follow the instructions in this manual.

ELECTRICAL INSTALLATION

Connect the appliance to a grounded power socket protected by a fuse complying with the values on the rating plate.
Pay special attention and be sure that the appliance is not placed on the power cord.
To avoid danger, a damaged power cord may only be replaced by the manufacturer, its service agent or similarly qualified persons.
If the appliance is damaged, it must not be operated unless repaired by the manufacturer, its service agent or similarly qualified persons.
The appliance may not be connected to the power mains using an extension cord.
Do not connect the appliance to the power mains using an external switch device such as a programme timer, or connect it to power mains that is regularly switched on and off by the power supply provider.
Do not connect the appliance to an electrical outlet intended for an electric shaver or hair dryer.
The mains plug must be accessible after installation.
Never use an extension cord or a multiple plugs for making a connection.
Do not pull the plug out of the power socket if there is flammable gas around.
Never pull out the plug with wet hands.
Always unplug the appliance when it is not being used and close the watertap.
Connection to water and power supply has to be executed by an adequately trained technician or expert.
Any repair and maintenance pertaining to safety or performance should be done by trained experts.
In case of a defect, only use approved spare parts by authorized manufacturers.
In case of incorrect appliance connection, incorrect use, or servicing by an unauthorized person, Tomado will not be responsible for any damage as such damage will not be covered by warranty.

WATER INSTALLATION

The appliance is equipped with a single inlet valve and can be connected to the cold water supply only.
To connect the appliance to the water supply, make sure to use the supplied water supply hose and gaskets.
The water pressure has to be between 0.05 and 1.0 MPa (0.5 – 10 bar).
Always use the supplied new water supply hose to connect the appliance to the water supply; do not reuse an old water supply hose.
The end of the water discharge hose should reach into a water drain line.
Check the connections of the water supply hose, the water tap and the water discharge hose for possible problems due to changes of water pressure. If the connections loosen or leak, close the water tap and get it repaired.
Do not use the appliance before the pipes and hoses are installed properly by authorized persons.
At higher washing temperatures, the door glass will heat up. Be careful to avoid burns. Keep children and animals far away from the machine while it is operating.
Do not remove the drain pump filter while there is still water in the appliance. Big quantities of water can leak out, and there is a risk of scalding due to hot water.

WATER OVERFLOW PROTECTION

If the water level in the appliance rises above normal level, then the excess water level protection will be activated. It will shut off the water supply and start pumping out the water. The program is interrupted and an error is reported.

CHILD SAFETY

Before closing the appliance door and running the programme, make sure there is nothing except laundry in the drum (e.g. if a child or animal climbed into the appliance drum).
Keep the detergents and softeners out of reach of children.
Do not let children aged 3 years and under come near the appliance, unless they are under constant supervision.
This appliance may be used by children aged 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards of inappropriate use. Children are not allowed to play with the appliance.
The appliance may not be cleaned or maintained by children, unless this is done under supervision.
Children should be supervised that they do not play with the appliance.
Do not climb or sit on the appliance.
The appliance is made in compliance with all relevant safety standards.

OPERATION AND MAINTENANCE

Do not use detergents that contain solvents as this could lead to release of poisonous gases, damage to the appliance, and risk of fire and explosion.
Only use the appliance for washing laundry as described in the instruction manual. The machine is not intended for dry cleaning.
Only use agents for machine washing and care of laundry. Tomado will not be responsible for any damages or discolouration of gaskets and plastic parts resulting from incorrect use of bleaching or colouring agents.
In case of a defect, only use approved spare parts by authorized manufacturers.
Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails, screws, stones etc. may cause serious damages to this machine.
Remove all objects from pockets such as lighters and matches before use the appliance.
Fabric softeners or similar products should be used as recommended in their instructions.
Never try to open the door forcefully. The door will unlock shortly after the end of a cycle.
Please do not close the door with excessive force. If it is found difficult to close the door, please check if the clothes are properly inserted and distributed.
In case of incorrect appliance connection, incorrect use, or servicing by an unauthorized person, the user shall bear the cost of any damage as such damage shall not be covered by warranty.
When cleaning the appliance, only use non-corrosive descaling agents. Follow the manufacturer’s instructions of the cleaning agent. Finish the descaling process with several rinse cycles in order to remove any residual acid (e.g. vinegar etc.).
The warranty does not cover consumables, minor deviations in colour, increased noise that results from appliance age and which does not affect the functionality of the appliance, and aesthetic defects on components, which do not affect the functionality and safety of the appliance.

TRANSPORT/TRANSPORT AFTER INSTALLATION

If you intend to move the appliance after it has been installed, then it should be blocked by inserting at least one transport bolt. Before inserting the transport bolt, disconnect the appliance from the power mains.
Accumulated water must be drained out of the appliance.
The appliance is heavy. Transport with care. Never hold any protruding part of the appliance when lifting. The door of the appliance cannot be used as a handle.

INTENDED USE

The appliance is intended solely for household use. If the appliance is used for professional, for-profit purpose or purpose exceeding normal use in a household, or if the appliance is used by a person who is not a consumer, the warranty period shall be equal to the shortest warranty period required by relevant legislation.
This appliance is intended to be used in household and similar applications such as:
staff kitchen areas in shops, offices or residential type environments;
farm houses;
by clients in hotels, motels and other residental type environments;
bed & breakfast type environments;
areas for communal use in blocks of flats or in launderettes.
The appliance is not intended for use by persons (including children) with physical or mental impairments, or persons with lacking experience and knowledge.
These persons should be instructed about the use of the appliance by a person responsible for their safety.

OLD APPLIANCE

Remove the door or deactivate the lock when disposing of the appliance. Children are known to have gotten themselves locked in old appliances.
To forestall such a situation, break your appliance’s door lock and tear off the electrical cables.
This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the collection systems or contact the retailer where the product was purchased.
They return and can take this product for environmental safe recycling.

PRODUCT DESCRIPTION

Top cover
Control panel
Power supply cord
Drum
Pump filter
Water discharge hose
Adjustable feet
Door
Dispenser tray
Water supply hose

INSTALLATION AND CONNECTION

REQUIRED SPACE FOR INSTALLING

WARNING!

Stability is important to prevent the product from sliding across the installation site!
Make sure to level the appliance and install it on a stable base in longitudinal and traverse direction by rotating the adjustable feet.
Make sure the appliance doesn’t stand onto the power cord.
Make sure to observe the minimum required clearances from the walls as indicated in the figure.
The room in which the appliance is placed must meet the following requirements:

Dry, level and stable solide base
Avoid direct sunlight
Sufficient ventilation
Room temperature is above 0°C
Keep far away from heat sources such as coal, gas or wood burning appliances.

UNPACKING THE APPLIANCE

WARNING!

Move the appliance with at least two people and wear protective clothing, such as sturdy gloves.
Packaging material (e.g. films, styrofoam) can be dangerous for children.
There is a risk of suffocation! Keep all packaging away from children.

Remove the cardboard box and the styrofoam packing.
Lift the washing machine and remove the base packaging. Make sure the small triangle foam [A] is removed with the bottom packaging together. If not, lay the appliance down on one side and carefully remove it manually.
Remove the tape securing the power supply cord and water discharge hose.
Take the water supply hose out of the drum.

REMOVING THE TRANSPORT BOLTS WARNING!
Before the first use of the appliance, the transport bolts must be removed from the back of the appliance. A blocked appliance may be damaged when it is switched on for the first time. The warranty does not apply in cases of such damage! TOMADO-TWM8001W-Washing-Machine-FIG-6

Loosen the 4 transport bolts with a spanner.
Remove the bolts including the rubber parts and keep them for future use.
Close the holes using the cover caps

LEVELLING THE APPLIANCE

WARNING!

The lock nuts on all four feet must be screwed tightly against the housing to ensure the appliance stands steady on its feet.
Use a level and a spanner to level the appliance.

Loosen the lock nut with a spanner.
Turn the foot until it reaches the floor.
Level the appliance in longitudinal and traverse direction by rotating the adjustable feet.
After adjusting the feet, firmly tighten the lock nuts with a spanner against the housing.

CONNECTING THE WATER SUPPLY HOSE

WARNING!

To prevent leakage or water damage, follow the instructions in this chapter.
Make sure not to kink, crush or modify the water supply hose.
Tighten the water supply hose by hand, firmly enough for the hose to have a good seal. After connecting the hose, the seal must be checked for any leaks.
Do not use pliers or similar tools when connecting the water supply hose as this could damage the nut thread.

Connect the water supply hose to the water inlet valve on the back of the appliance.
Connect the other end of the water supply hose with the aqua stop to a water tap with cold water.

CONNECTING THE WATER DISCHARGE HOSE

Make sure not to kink or protract the water discharge hose.
Connect the water discharge hose properly, otherwise it could result in damage of water leakage.
Feed the water discharge hose into a drain pipe, wash basin or floor drain. Be careful not to feed the water discharge hose to deep in the drain.
Otherwise the waste water can not flow freely.
The vertical distance from the floor to the end of the discharge hose may no more be than 100 cm and no less than 60 cm.

Put the water discharge hose in a floor drain.
Connect the water discharge hose to a drain pipe.

CONNECTING THE APPLIANCE TO THE POWER MAINS

Before connecting the appliance to the power mains, wait for at least 2 hours until it reaches room temperature.
Connect the appliance to a grounded power outlet. After installation, the wall outlet must be freely accesible. The outlet must be fitted with an earth contact (in compliance with the relevant regulations).
Information on your appliance is indicated on the rating plate.
Using an over-voltage protection to protect the appliance in case of a lighting strike, is recommended.
Do not connect the appliance to the power mains using an extension cord.
Do not connect the appliance to an electrical outlet intended for an electric shaver or hair dryer.
Any repair and maintenance pertaining to safety or performance must be done by trained experts.
A damaged power cord may only be replaced by a person authorized by the manufacturer.

OPERATION

QUICK START

CAUTION!

Before washing, please make sure the appliance is properly installed.
Your appliance was thoroughly checked before it left the factory.
To remove any residual water and to neutralize potential odors, it’s recommended to clean your appliance before the first use.
To do so, please run the Cotton programme at 90°C without laundry and detergent. See the chapter WASHING.

CALIBRATING THE APPLIANCE!

It’s recommended to calibrate the appliance before using it, so that it provides the best performance.
The appliance is able to detect the amount of laundry that is loaded in the drum. This function will optimize the appliance’s performance by minimizing energy and water consumption, saving you money and time.
Therefore it’s recommended to calibrate the appliance for the best use.

Remove all accessories from the drum and close the door.
Insert the mains plug to the power outlet.
Switch on the appliance to any programme and press TPM and START DELAY simultaneously for 3 seconds until [t19] is displayed.
Press to start the appliance. The drum will spin in order to calibrate it.
Wait till the drum stops spinning and a [ random number ] is displayed.

BEFORE EACH WASHING

The ambient temperature of the appliance should be 5-40°C. If used under 0°C, the inlet valve and draining system may be damaged.
If the appliance is installed under freezing conditions, it should be transferred to a normal ambient temperature environment to ensure the water supply hose and the water discharge hose can unfreeze before use.
Before each washing, sort your laundry by reading the wash labels and the detergent use instructions. Use non-foaming or less-foaming detergent suitable for machine washing.

Check the care label
Sort the laundry according to color and textile type
Turn the pockets inside out, making sure there are no items left inside
Tie any ribbons or belts and close buttons and zippers
Put small items and delicate clothing into a special laundry bag
Turn easy-pilling and long-pile fabric inside out

WARNING!

Do not wash clothes that have been cleaned, washed, soaked in or dabbed with combustible or explosive substances like wax, oil, paint, gasoline, alcohol, kerosene or other flammable materials.
Washing single items may easily create big eccentricity and cause vibrations and noise due to unbalance.
Therefore it is suggested to add one or two more laundry items to the wash so that spinning can be done smoothly.

WASHING PREPARING BEFORE WASHING

TOMADO-TWM8001W-Washing-Machine-
FIG-13

Plug in
Open the tap
Open the door and load
Close the door
Add detergent

NOTE!

Additional detergent needs to be added in compartment I if the pre-wash function is selected.

WASHING

Select a programme
Select settings and/or additional functions
Press Start/Pause to start the program

AFTER WASHING

When the program is finished and the appliance is ready, a buzzer will sound and on the display [ End ] appears for a few seconds before the display goes out.

DISPENSER TRAY

Pre-wash
Main wash
Softener

CAUTION!

Additional detergent needs to be added in compartment I if the pre-wash function is selected.
It is not necessary to add detergent for all programmes. Check the table below for more information.
Means detergent ‘obligatory
Means detergent/softener optional

NOTE!

Before adding hardened lumps of powder detergent or a thick stringy liquid detergent or additive into the dispenser tray, it can be diluted in some water before pouring it in, as this may clog the piping in the appliance and cause a water overflow.
Choose a suitable type of detergent, fitting to the selected washing temperature and fabric, to get the maximum washing performance and a minimum of water and energy consumption.
Add powder or liquid detergents according to the manufacturer’s instructions, considering the washing temperature,washing program, how soiled the laundry is, and water hardness.

CONTROL PANEL

TOMADO-TWM8001W-Washing-Machine-
FIG-18

Spinning rate

When needed, the spinning rate can be adjusted by pressing the TPM button.
There are 7 settings: 0 – 400 – 600 – 800 – 1000 – 1200 – 1400 [ — – 400 – 600 – 800 – 10- – 12- – 14- ].

Temperature

When needed, the washing temperature can be adjusted by pressing the temperature button.
There are 6 settings: Cold – 20°C – 30°C – 40°C – 60°C – 90°C [ — -20°C-30°C-40°C-60°C-90°C ].

Start delay

Use this function to start the washing cycle after a certain amount of time has elapsed. Proceed as follows:

Select a programme
Press the START DELAY button to choose the delaying time. Set the hours by repeatedly pressing or holding the START DELAY button. It can be set from 0 up to 24 hours.
Press START /PAUSE button to start the delay.

Canceling start delay

To cancel the START DELAY function, press the START DELAY button, before the washing programme is started, until the display shows 0 H.

TOMADO-TWM8001W-Washing-Machine-FIG-22 OTHER FUNCTIONS

Child lock

This function is a safety feature and prevents children from misusing the control panel.
To activate the child lock, proceed as follows:
Press the START DELAY and FUNCTION button simultaneously for 3 seconds until the buzzer beeps.
The child lock indicator switches on, the display will alternately show [ CL ] and the remaining time, when the appliance is running a washing programme.

Deactivating the child lock

Press the START DELAY and FUNCTION button simultaneously for 3 seconds until the buzzer beeps.
The child lock indicator switches off.

CAUTION!

When the CHILD LOCK is activated, the display will alternately show [ CL ] and the remaining time, when the appliance is running a washing programme.
Pressing any button will cause the CHILD LOCK indicator to flash for 3 seconds. When the programme ends, [ CL ] and [ END ] will alternate on the display for 10 seconds, then the indicator will flash for 3 seconds.
The Child lock deactivates the function of all buttons except the on/off knob and the child lock button combination!
Only the simultaneous pressing of the two buttons START DELAY and FUNCTION can deactivate the child lock.
Please deactivate the child lock before selecting a new programme!

Pre-wash

Before the main washing cycle starts, the laundry will be extra washed to increase the washing performance.
Particularly suitable for heavily soiled laundry with stubborn superficial stains.
Note: Don’t forget to also add detergent to compartment I.

Extra rinse

The laundry will undergo an extra rinse after selecting this function.

Extra wash

The washing time and intensity are increased for a better cleaning effect of heavily soiled laundry.

Hygiene Pro

Hygiene Pro is not an additional function you can choose. It is automatically added to some programmes and the indicator will light up if one of the programmes is selected which include Hygiene Pro.
Hygiene Pro cleans your drum and the glass of the inner door with cold water at the end of the washing cycle.
This self-clean function keeps your appliance and laundry clean and will be automatically activated during the washing cycle. Check the chapter SELECTING ADDITIONAL FUNCTIONS to see which programmes include the Hygiene Pro function.

Adding laundry

It is possible to add or remove laundry during a washing cycle. After a certain period of time, the appliance door can be opened if the water level and temperature are below a predefined threshold.
If the conditions below are met, then the electronic door lock is released and the appliance door can be opened:
water temperature in the drum has to be suitable;
water level in the drum has to be below a certain value.

CAUTION!

When the drum is still rolling and there is a large amount of water with high temperature in the drum, the state is unsafe and the door cannot be opened forcefully.
Don’t use the ADDING LAUNDRY function when the water level is over the edge of the inner drum or when the water temperature is high.

In order to add or remove laundry from the drum during a washing cycle, proceed as follows:

Press the START PAUSE button for 3 seconds.
Wait until the drums stops rotating.
The door will unlock.
Open the door and add or remove the laundry.
Close the door and press the START PAUSE button. The washing cycle will resume.

CAUTION!

If a considerable amount of laundry is added during the washing cycle, the laundry could be washed less effectively, since the appliance initially sensed a lower weight of the laundry load and added a smaller amount of water. Insufficient amount of water relative to the amount of laundry could also cause damage to the laundry (rubbing of dry laundry), and the washing time can be longer.
The washing time will resume from the point at which the washing programme was interrupted.

Muting the buzzer

The sound of the buzzer can be muted. Proceed as follows to mute the buzzer:

Choose any programme.
Press the TEMPERATURE button for 3 seconds. The buzzer is mute.

Activating the buzzer

Choose any programme.
Press the TEMPERATURE button for 3 seconds. The buzzer is activated again.

CAUTION!
• After muting the buzzer function, be aware that there are no sounds activated anymore.

Display
The display shows the settings, estimated time remaining, spinning rate, temperature, start delay, options and status messages for your appliance. The display will remain on during the cycle. TOMADO-TWM8001W-Washing-Machine-
FIG-29

PROGRAMMES

Programme	Max. load	Programme description
40° Cotton	8,0 kg	Washing programme for normally or heavily soiled laundry,

white or coloured.

The temperature can be set separately; therfore, observe the instructions indicated on the clothing.