TOMADO TTB1001B Blender Stand Mixer Instruction Manual

TOMADO TTB1001B Blender Stand Mixer

Product Information

Specifications:

• Model: TTB1001B
• Type: Blender Standmixer
• Components: Cap, Lid, Jug, Knive Assembly, Base, Control Knob, Rubber Feet

Product Description:
The blender standmixer is designed for blending, mixing, and crushing ingredients efficiently. It comes with various components including a cap, lid, jug, knive assembly, base, control knob, and rubber feet.

Usage Instructions:

Prior to First Use:

1. Ensure the voltage on the appliance matches the voltage in your region.
2. Place the blender on a flat, clean, and dry surface.
3. Ensure all parts are dry before using the appliance.

Using the Blender:

1. Place the blender on a flat surface.
2. Ensure the blender is not activated.
3. Add ingredients to the jug.
4. Secure the lid by turning it clockwise.
5. Attach the jug to the base by turning it clockwise until it clicks into place.
6. Choose a speed setting to activate the blender. Avoid constant activation to prevent motor issues.
7. Operate the blender for up to 1 minute at a time. Allow a 1-minute break before using it again.
8. Turn the control button off when done blending and wait for the blades to stop.
9. Unlock the jug from the base to remove it.

Cleaning and Maintenance:
Before cleaning the blender, always unplug it from the power outlet. Follow the cleaning instructions provided in the manual for proper maintenance.

Recycling:
Dispose of the product according to local regulations for electronic waste disposal to minimize environmental impact. The packaging material is recyclable; please recycle it appropriately.

FAQ

Q: How do I avoid injuries while using the blender?
A: Avoid touching the blades when the device is operating as they are extremely sharp. Ensure all safety precautions are followed.

SAFETY INSTRUCTIONS

• Please read these instructions before operating the appliance and retain for future use.
• The appliance is intended solely for domestic use within the home.
• Attention! avoid touching the blades when the device is operating. The blades are extremely sharp.
• Make sure the device is shut off and unplugged before changing the accessory or before touching parts with can rotate during use.
• Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed on the bottom of the appliance.
• Never let the power cord of the appliance hang over the edge of a table or counter, touch hot surfaces or become knotted.
• Never place this appliance on or near a hot gas or electric burner or where it could touch a heated oven or microwave oven. Do not allow this appliance to touch curtains, wall coverings, clothing, dishtowels or other flammable materials during use.
• Always use the appliance on a secure, dry, level surface.
• Never leave the appliance unattended when in use.
• If the mains connection cable is damaged, it must be replaced by the manufacturer, its service agent or similar qualified persons in order to avoid a hazard.
• Always return the appliance after a malfunction, or if it has been damaged in any manner to the Customer Service Department for examination, repair or adjustment as special purpose tools are required.
• For your own safety, only use the accessories and spare parts from the manufacturer which are suitable for the appliance.
• Never unplug it from the socket by pulling the cable.
• Always ensure that your hands are dry before handling the plug, switch or power cord.
• This appliance shall not be used by children from 0 to 8 years. This appliance can be used by children over the age of 8 and above if they are continuously supervised.
• This appliance can be used by people with reduced physical, sensory or mental capabilities or lack of experience or knowledge, if they have been given supervision or instruction concering use of the appliance in a safe way and understand the hazards involved. Keep the appliance and its cord out of reach of children aged less than 8 years.
• Cleaning and maintenance shall not be made by children.
• Children should be supervised to ensure that they do not play with the appliance.
• Unplug the appliance as soon as you have finished using it and when you are cleaning it.
• Never immerse any part of the main body, power cord and plug into water or any other liquid to protect yourself against electrical hazards.
• This appliance is intended to be used in household and similar applications such as:
  • staff kitchen areas, in shops, offices and other working environments;
  • by clients in hotels, motels and other residential type environments;
  • Bed and Breakfast type environments
  • farm houses.
• When the appliance is used for other purposes than intended, or is when it is not handled in accordance with the instruction manual, the full responsibility for any consequences will rest with the user. Any damages to the product or other things are not covered by the warranty.

PRODUCT DESCRIPTION

1. Cap
2. Lid
3. Jug
4. Knive assembly
5. Base
6. Control knob
7. Rubber feet

PRIOR TO FIRST USE

• Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after unpacking for any damage, possible from transportation. Place the blender on a flat and stable surface. Rinse all the accessories – jug, knives and lid – with warm soapy water and dry them thoroughly. Wipe the base with a damp cloth. Always roll out the cord completely.
• When the blender is in use, the ingredients will be transported along the sides of the jug to the top and will come down through the middle. This system guarantees that even ice cubes will be completely crushed.
• Make sure that all the parts are dry before you use the appliance.
• Place the blender on a flat and stable surface as soon as you have rolled out the cord. The blender has rubber feet at the bottom. These ensure the blender will stand steady. Practice a few times to disassemble and assemble the blender without any ingredients.
• The middle of the lid has a cap which can be used as a measuringcup and for adding ingredients. Through the opening in the lid you can gradually add ingredients.
• The control knob regulates the speed of the blender. The blender has 2 speeds and a pulse (ice crush) setting.
  • setting P = pulse
  • setting O = off
  • setting 1 = lowest speed
  • setting 2 = highest speed
• The blender can crush ice cubes with the pulse setting. This means that the blender is only activated when you turn the knob to the pulse setting. As soon as you let go of the button the blender will be deactivated.

USING THE BLENDER

Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed on the bottom of the appliance.

1. Place the blender on a flat, clean and dry surface.

2. Make sure that the blender is not activated.

3. Place the ingredients in the jug.

4. Place the lid and lock it by turning it clockwise.

5. Place the jug with the handle on the right side onto the base and turn it clockwise, until you feel it click into place.

6. Activate the blender by choosing a speed setting.
   Attention: Do not activate the blender constantly, this can cause engine problems. Do not use the blender for more then 1 minute continuously, wait 1 minute before you operate it again.

7. When the blender has finished mixing, blending or crushing turn the control button OFF (0) and wait until the knives have stopped turning.

8. Unlock the jug and take it off.

TIPS

• When the jug is cracked, do not use the blender anymore. This could lead to damage while using the blender.
• To avoid splashes always place the lid on the jug.
• Always add liquid ingredients before adding solid ingredients in the blender.
• The blender mixes best when you do not add pieces which are too large.
• Always add a half a cup of liquids when you crush ice cubes.
• To add ingredients while the blender is activated, take the cap out of the lid and add the ingredients through the opening.
• When the ingredients stick to the sides of the jug or are not mixed properly, shut off the engine: wait until the knives have stopped turning and push the ingredients with a spatula towards the knives.
• To prevent the ingredients from being blend to small, take into account that the blender mixes in seconds, not minutes!
• Working with warm ingredients can cause a build-up of pressure in the jug and that can cause hot liquids to escape when you take the lid of the jug. Therefore always remove the cap from the lid when you are processing warm ingredients. Cover the opening with, for example, a tea towel.

CLEANING AND MAINTENANCE

• Always unplug the cord from the socket before cleaning the appliance.

• Wipe the base with a damp cloth. Do not use any abrasive or strong detergents.

• Never place the appliance, the power cable or the plug in water or any other liquid.

• Remove the knives according to the instructions below:
  Attention: be careful, the knives are extremely sharp.
  Clean the knives as a whole do not try to take them apart. Attention: do not use any abrasive or strong detergents.

• For placing and removing the knives you need to take the jug of the blender.

• Place the glass jug, without the lid, upside down on a flat stable surface.

• Take the knive assembly and the silicone ring out of the blender.

• Attention: never try to take the knive assembly apart.

• To replace the knives follow the instructions in the reverse order. Make sure not to forget to place the silicone ring. The blender will leak without the silicone ring.

• The following parts can be cleaned: the jug, the knive assembly, the lid and the cap. Be careful when cleaning the knive assembly. The knives are very sharp.

RECYCLING

This symbol means that this product should not be disposed of with regular household waste (2012/19/EU). Observe the applicable rules in your country for the separated collection of electric and electronic products.
By disposing of the product correctly, you prevent negative consequences for the environment and for public health. The packaging material of this product can be recycled 100%, return packaging material separately.

ORDERING ACCESSORIES
Go to www.tomado.com/support to purchase accessories or spare parts.

WARRANTY CONDITIONS

A 24 month warranty is provided for this product. Your warranty is valid if the product has been used in accordance with the user instructions and for the purpose for which it was made. Also the original proof of purchase must be submitted, stating the date of purchase, the name of the retailer and the item number of the product. For extensive warranty information you are referred to our website: www.tomado.com/support

Tomado Electric Appliances Postbus 159
6920 AD Duiven
The Netherlands support@tomado.com www.tomado.com

Modifications and printing errors reserved
TTB1001B/01.0823

TOMADO.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>