ANSLUT 014231 Solar Globe LED Instruction Manual
- June 4, 2024
- anslut
Table of Contents
014231 Solar Globe LED
Instruction Manual
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).
Care for the environment!
Recycle discarded products in accordance with local regulations.
Jula reserves the right to make changes. For the latest version of operating
instructions, see www.jula.com 
SAFETY INSTRUCTIONS
- Keep sharp objects away from the surface of the solar panel to prevent scratching and damage.
- The functionality of the product can be checked by covering the top of the solar panel-the light should go on if the product has started.
- It is difficult to see the LED light in bright ambient light. The product works best in the dark. This does not mean that the product is not working.
- For best functionality, allow the product to charge for one day before using it for the first time.
SYMBOLS
| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
| Recycle discarded products in accordance with local regulations.
TECHNICAL DATA
| Battery type | AA/LR06 |
|---|---|
| Voltage | 1.2 vote |
| Battery capacity | 600 mAh |
| Color temperature | 3000 K |
| Colour tone | Warm white |
| Luminous flux | 4 I’m |
| Protection rating | IP44 |
| Height | 16.8 cm |
| Diameter | ∅20 cm |
DESCRIPTION
- The product runs on solar energy via the built-in solar panel.
- The product is weather resistant.
- The solar panel converts solar energy to electrical energy, which is used to charge the rechargeable AA battery (Ni-MH).
- The light switches on automatically when it goes dark, and switches off in daylight.
- How long the light stays on depends on how long the solar panel has been exposed to sunlight.0
- Long exposure to sunlight produces longer lighting up.
- For best functionality, place the product so 0that it is exposed to as much sunlight as possible.
- With maximum exposure to sunlight, the light will shine for up to 8 hours.
1. Globe
2. Solar panel
3. Battery box
4. Stem
5. Ground spike
HOW TO USE
-
Carefully remove all the parts from the packaging.
-
Start the product with the power switch.
FIG. 13 -
Fit the stem and ground spike on the globe to suit requirements and press the ground spike in the ground.
MAINTENANCE
Follow the instructions to replace the rechargeable AA battery (Ni-MH).
FIG. 14
-
Remove the screws underneath the
battery box. -
Remove the battery box from the product.
-
Remove the screws on the solar panel.
-
Replace the battery with a new one of the same type (rechargeable AA battery, 1.2 voe, 600 mAh, Ni-MH).
JULA AB, BOX 363, SE-532 24 SKARA
2022-02-08
© Jula AB
Documents / Resources
|
ANSLUT 014231 Solar Globe
LED
[pdf] Instruction Manual
014231, Solar Globe LED, 014231 Solar Globe LED, Globe LED, LED
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>