ALINO Stainless Steel Shower Niches Installation Guide
- June 5, 2024
- ALINO
Table of Contents
ALINO Stainless Steel Shower Niches
IMPORTANT
Prior to installation, all parts and ocomponents should be thoroughly
inspected for defects. This product will not be warranted if it has been
installed with pre-existina defects.
This product should be installed by a licensed tradesperson.
It is the installer’s responsibility to ensure that this product is installed in compliance with relevant local, national and state building codes.
Waterproofing
All joints between the niche and walls must be waterproofed.
Installation
Step 1
Cut the tape into 4 pieces and apply to the back of the niche rim.aroave as
shown
Double-sided foam tape
Step 2
Step 3
Boxing the hole with stud is recommended for maximum support as shown below.
Refer to the actual product size when cutting the hole far the niche
Step 4
After installing the ceramic.
Rest the botom first then push it in.
Apply silicone caulking all around the edge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>