ILUMINAR IL-HMOL-1000 HYPERMOL Full Spectrum User Manual

October 30, 2023
ILuminar

ILUMINAR IL-HMOL-1000 HYPERMOL Full Spectrum

Product Information

The HYPERMOL Full Spectrum is a 1000W LED lighting solution designed for indoor gardening and growing. It is rated for a voltage of 100-277V and has a PPF efficacy of 2.3 μmol/J. The fixture comes with a blue-tipped power cable and can be hung from rope ratchets or mounted to a rack. It has a length of 1065mm, a width of 1005mm, and a height of 58mm. The fixture weighs 20.8kg and has a lifespan of 90% of life.

Technical Specifications

  • Watts: 1000W
  • Voltage: 100-277V
  • SKU: IL-HMOL-1000
  • Rated Voltage: 120V, 208V, 220V, 240V, 277V, 480V
  • PPF Efficacy: 2.3 μmol/J
  • Min Power Factor: >0.95
  • THD: <10%
  • BTU: 50.3lbs
  • Dimmable: Yes
  • Ambient Temperature: -20°C to +40°C (-4°F to +104°F)
  • Minimum Mounting Height: 6 inches above the canopy
  • Emitter Cooling: Passive cooling
  • Light Distribution: 120°
  • LED Lifespan (90% of Life): >54,000 hours

Physical Specifications

  • Length: 1065mm (41.9 inches)
  • Width: 1005mm (39.6 inches)
  • Height: 58mm (2.3 inches)
  • Weight: 20.8kg (45.9lbs)

Hardware and Accessories
The HYPERMOL comes with 1 fixture, 1 cable, and 4 rope ratchets for hanging installation. Before installation, ensure that all necessary parts are present.

Product Usage Instructions

Hanging Installation

  1. Attach the 4 rope ratchets to the HYPERMOL fixture.
  2. Hang the fixture from the ceiling or mounting beam using carabiners and the rope ratchets, ensuring that the ratchets are installed closest to the fixture and not the ceiling.
  3. Connect the blue-tipped power cable from the outlet to one side of the fixture.
  4. Adjust the slack of the ratchets to raise or lower the fixture as needed.
  5. Do not touch the diodes or apply direct force to them as this can cause permanent damage to the LED array.

Cable Logic Connections
The HYPERMOL can be connected to other fixtures using a single power cable. Consult with ILUMINAR Lighting Professional Systems for proper spacing of outlets for your unique setup.

  1. Use the Cable Logic Main-Line AC Extension Cable to connect multiple fixtures.
  2. Available cable lengths include 0.9 m (3 ft), 1.8 m (6 ft), and 4.5 m (15 ft).

Please read this manual thoroughly prior to installing or operating the ILUMINAR HYPERMOL

  • Observe all safety precautions (see page 10), seek the services of a qualified electrician, installation professional, or call ILUMINAR Lighting technicians for assistance.
  • DO NOT handle or touch the fixture while in use.
  • Connect the fixture only to the power sources of the appropriate voltage using the correct AC plug type. Protect power cables from being pinched, walked on, or otherwise damaged. Be especially careful where the power cable enters the power outlet to the unit. Only connect the fixture to an electrical outlet or extension cord of comparable standard and level rating. Connect the fixture ONLY to the power sources of the correct voltage using the plug received.
  • The fixture should only be cleaned as directed. Always seek service for your system by qualified service personnel if any of the following occur:
  1. The fixture shows a noticeable change in performance.
  2. The power supply cord or plug is damaged.
  3. The fixture has been dropped, or the exterior is damaged.

TECHNICAL SPECS

1000W LED SPECTRUM

MOUNTING & COVERAGE

Rated Voltage 120-277V AC
PPF 2700 µmol/s
Efficacy 2.7 µmol/J
Min Power Factor >90%
THD < 20%
BTU 3,400
Dimmable 0-10V Controllable
Ambient Temperature 0 – 35°C / 32 – 95°F
Minimum Mounting Height 6” to top of Canopy
Emitter Cooling Passive / Extruded Case
Light Distribution 120º
LED Lifespan (90% of Life) 50,000+ hours

PHYSICAL SPECIFICATIONS

Length 1065 mm 41.9”
Width 1005 mm 43.5”
Height 58 mm 2.3”
Weight 20.8kg 50.3lbs

VOLTAGE AND AMPERAGE

120V 9.3A 1060W
208V 5.15A 1015W
220V 4.43A 1010W
240V 3.8A 1000W
277V 2.8A 925W
480V 2.2A 1000W

HARDWARE AND ACCESSORIES

The HYPERMOL can be hung from rope ratchets or can be mounted to a rack.
Before you begin installation, check that you have all the necessary parts to begin.

IN THE BOX

  • 1 HYPERMOL Fixture

  • 1 Cable

  • 4 Rope Ratchets

HANGING INSTALLATION

  1. To suspend mount, attach the 4 rope ratchets that come packaged with this fixture to the LED.
    ILUMINAR-IL-HMOL-1000-HYPERMOL-Full-Spectrum-8

  2. Lift the LED and attach the carabiners to pre-installed hooks from ceiling or mounting beam. The Ratchets should be installed closest to the LED (and not the ceiling).

  3. A: Remove slack to raise fixture.

  4. B: Give slack to lower fixture.

  5. Once fixture is hanging with all LED bars installed, connect the power cable (blue tip) from the outlet to one side of the fixture.

CAUTION when handling your ILUMINAR Fixture. The LED array should NOT come in contact with sharp objects. DO NOT touch diodes or apply direct force to the diodes as this can/will cause permanent damage.

CABLE LOGIC CONNECTIONS

With our ILUMINAR Lighting Professional Systems, our new LED lighting fixtures allow growers to connect multiple fixtures using a single power cable.
This cabling solution forms a fixture-to-fixture connection to the power source. Our grow light cables and grow light accessories eliminate the need for the typical mess of LED lighting cables, which have various fixtures with multiple cables running to several power sockets.
Please consult with our lighting layout designers to ensure proper spacing of outlets for your unique setup.

ILUMINAR-IL-HMOL-1000-HYPERMOL-Full-Spectrum-10 ILUMINAR-IL-HMOL-1000-HYPERMOL-Full-Spectrum-11

CAUTION
Please read the following list carefully prior to beginning installation.

  1. Leave at least one inch of space between the fixture and the mounting area for maximum performance and lifespan.
  2. ALWAYS wear protective eye wear when looking directly at the diodes to prevent eye damage.
  3. Only handle, clean or move fixture when it’s unplugged and completely cool.
  4. Keep the fixture free of dust, debris, deposits to ensure the maximum potential of the fixture.
  5. NEVER use cloth to clean the diodes. This will scratch the diodes and could potentially break or dislodge them.
  6. DO NOT use chemicals to clean the fixture. Use ONLY low pressure air or low pressure water to remove dust and debris.
  7. Do NOT exceed 70% max load for breakers due to Inrush current in LED fixtures.
  8. Do NOT use sulfur vaporizers.

At ILUMINAR, we stand behind our products and our technology as well as our customers. All ILUMINAR LED fixtures are backed by our 5-Year Guarantee. Please visit our website iluminarlighting. com/warranty for more information.
© Copyright 2023, ILUMINAR Lighting Subject to change without notice.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ILuminar User Manuals

Related Manuals