AIRTHINGS Renew Air Purifier User Guide
- June 16, 2024
- Airthings
Table of Contents
RENEW air purif ier
Quick start guide
GETTING STARTED
-
Stand Renew upright with the strap handle up and the cable compartment to the side.
-
Remove the cable compartment cover.
Attach the power cable first to the input inside the compartment, then to a power outlet. Renew will star t in Auto mode. -
Replace the cover and wind any extra length of cable inside it.
-
Download the Airthings app, create your account, and connect to Renew.
DOS & DON’TS
| Do read the User Manual
for complete safety and use instructions.
---|---
| Do feel free to move
Renew from room to room using the strap handle.
| Don’t place any items
on top of the unit.
| Don’t block the airflow
near the front cover, the top outlet grill, or the Airthings Sensor System.
Leave at least 8 in (20 cm).
OUR TOP TIPS
| Use Auto mode —
it will keep your air clean and minimize energy use.
---|---
| Need maximum cleaning power? Press Boost to run Renew on the highest speed
for 1 hour.
| Ready for bed? Press Silent to run Renew on the quietest speed for 8 hours.
| Check your air quality at-a-glance:
Green means Good
Yellow means Fair
Red means Poor
With the Airthings app, you can control Renew remotely, order replacement filters, and use customizable graphs to understand your current and past air quality trends.
Breathe better.
Live better.
Need a little help?
For support articles go to help.airthings.com or
contact our customer service
team by email at support@airthings.com
Follow @airthings onwww.linktr.ee/airthings
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>