ILUMINAR 200W and 450W OEM Full Spectrum User Manual

: October 30, 2023
: ILuminar

Table of Contents

200W and 450W OEM Full Spectrum
TECHNICAL SPECS
OEM LED SPECTRUM
PHYSICAL SPECIFICATIONS
HARDWARE AND ACCESSORIES
IN THE BOX
HANGING INSTALLATION
PRODUCT FEATURES
Documents / Resources

USER MANUAL
OEM Full Spectrum
100W, 200W & 450W

200W and 450W OEM Full Spectrum

Please read this manual thoroughly prior to installing or operating the OEM

Observe all safety precautions (see page 8), seek the services of a qualified electrician, installation professional, or call ILUMINAR Lighting technicians for assistance.
DO NOT handle or touch the fixture while in use.
Connect the fixture only to the power sources of the appropriate voltage using the correct AC plug type. Protect power cables from being pinched, walked on, or otherwise damaged. Be especially careful where the power cable enters the power outlet to the unit. Only connect the fixture to an electrical outlet or extension cord of comparable standard and level rating. Connect the fixture ONLY to the power sources of the correct voltage using the plug received.
The fixture should only be cleaned as directed. Always seek service for your system by qualified service personnel if any of the following occur:
1. The fixture shows a noticeable change in performance.
2. The powersupply cord or plug is damaged.
3. The fixture has been dropped, or the exterior is damaged.

VOLTAGE: 100-277V
WATTS: 100W
WATTS: 200W
WATTS: 450W

TECHNICAL SPECS

Rated Voltage| 100-277V|200-480V
---|---
PPF ( µmol/s)| 250 | 500 | 1035
Efficacy ( µmol/J )| 2.5 | 2.3 | 2.3
Min Power Factor| 0.9
THD| < 20%
BTU| 342 | 684 | 1,539
Dimmable| 0-10V Controllable
Ambient Temperature| 0 – 35°C / 32 – 95°F
Emitter Cooling| Passive / Extruded Case
Light Distribution| 120º
LED Lifespan (90% of Life)| 50,000+ hours

OEM LED SPECTRUM

VOLTAGE AND AMPERAGE

| 0.8A| 1.6A| 3.7A
---|---|---|---
208V| 100W| 200W| 450W
120V| 0.4A| 0.9A| 2.1A
240V| 0.4A| 0.8A| 1.8A
277V| 0.3A| 0.7A| 1.6A

PHYSICAL SPECIFICATIONS

100W

Length| 300 mm| 11.8”
Width| 240 mm| 9.4”
Height| 55 mm| 2.1”
Weight| 2.26kg| 3.71lbs
200W| 450W
---|---
600mm| 23.6”| 600 mm| 23.6”
240 mm| 9.4”| 480 mm| 18.8”
55 mm| 4.72”| 55 mm| 4.72”
2.26kg| 8.17lbs| 7.8kg| 17.2lbs

HARDWARE AND ACCESSORIES

The OEM can be hung from Adjustable Rope Hanger. Before you begin installation, check that you have all the necessary parts to begin.

IN THE BOX

HANGING INSTALLATION

A Attach the 4 clips on the wire hangers onto corresponding 4 hole on the edge of the panel.
B Clip the carabiner onto adjustable rope hanger. Hang up the light onto the grow tent and then adjust an appropriate height.

PRODUCT FEATURES

LED DRIVER:
Selecting driver, and universal single-phase power supply (100-277VAC) is adopted to meet the needs of different regions to the greatest extent, and ensure that the fluctuation of the power network will not affect the life of LED fixture.
LED CHIPS:
Selecting imported SAMSUNG/OSRAM LED chips, the light efficiency is up to 210Lm/W, providing abundant photons for plants, and the lifetime of 54,000H is worry-free.
APPLICATION ENVIRONMENT:
Can be used in warehouse, grow tent and other dry or wet planting environment.
HEAT DISSIPATION PERFORMANCE:
Selecting 4.0 highly purified aluminum plate + 2.0 high thermal conductivity substrate. Large heat dissipation area to effectively ensure rapid heat dissipation,through strict test configuration, to provide cost-effective heat dissipation scheme and meet customer planting needs.

CAUTION

Please read the following list carefully prior to beginning installation.

Leave at least one inch of space between the fixture and the mounting area for maximum performance and lifespan.
ALWAYS wear protective eye wear when looking directly at the diodes to prevent eye damage.
Only handle, clean or move fixture when it’s unplugged and completely cool.
Keep the fixture free of dust, debris, deposits to ensure the maximum potential of the fixture.
NEVER use cloth to clean the diodes. This will scratch the diodes and could potentially break or dislodge them.
DO NOT use chemicals to clean the fixture. Use ONLY low pressure air or low pressure water to remove dust and debris.
Do NOT exceed 70% max load for breakers due to Inrush current in LED fixtures.
Do NOT use sulfur vaporizers.

3 YEAR GUARANTEE
At ILUMINAR, we stand behind our products and our technology as well as our customers. All ILUMINAR LED fixtures are backed by our 3-Year Guarantee. Please visit our website iluminarlighting.com/warranty for more information.
© Copyright 2023, ILUMINAR Lighting Subject to change without notice.

1-877-540-5588
iluminarlighting.com
sales@iluminarlighting.com

Documents / Resources

| ILUMINAR 200W and 450W OEM Full Spectrum [pdf] User Manual
200W and 450W OEM Full Spectrum, 450W OEM Full Spectrum, OEM Full Spectrum, Full Spectrum, Spectrum
---|---