ITC 69394 and 69383FF Prominence Docking Light and Vivid Flood Light Installation Guide
- June 3, 2024
- ITC
Table of Contents
ITC 69394 and 69383FF Prominence Docking Light and Vivid Flood Light
PARTS/TOOLS NEEDED:
-
Prominence™ Docking Light and Vivid™ Flood Light
-
Hole Saw Bit (not provided)
-
**Power Drill (not provided)
**
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND
SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
GENERAL NOTES
- The Vivid Flood Light is 2.6” Dia. x 1” D while the Prominence Docking Light is 2.6” Dia. x 2.8” D, 0.6”. For more information about the technical specifications please see the Vivid or the Prominence literature sheets.
-
Determine the installation location and drill a 1-1/2” hole. Remove the plastic nut and washer from the back of the light and push the light into the hole. Slide the washer back onto the light and tighten the nut
-
Use the wiring diagrams below to wire the light.
DIAGRAMS
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
Documents / Resources
| ITC
69394 and 69383FF Prominence Docking Light and Vivid Flood
Light
[pdf] Installation Guide
69394 and 69383FF Prominence Docking Light and Vivid Flood Light, 69394,
69383FF, 69394 Prominence Docking Light and Vivid Flood Light, 69383FF
Prominence Docking Light and Vivid Flood Light, Prominence Docking Light and
Vivid Flood Light, Prominence Docking Light, Docking Light, Prominence Vivid
Flood Light, Vivid Flood Light, Flood Light, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>