Sencor SPS 15 1500 mAh Universal Switching Power Supply Unit Owner’s Manual

Sencor SPS 15 1500 mAh Universal Switching Power Supply Unit

Specifications

• Model: SPS 15
• Input Voltage: 100-240V AC
• Input Frequency: 50/60Hz
• Output Voltage: 3-12V
• Output Current: 1.5A
• Power: 18W
• Efficiency: 85%

Product Information

The SPS 15 is a versatile power supply unit that meets all the
basic EU regulation requirements. It is designed to provide stable
power output for various electronic devices.

Product Usage Instructions

Installation

• Connect the input power cord to a suitable power outlet with a voltage within the range of 100-240V AC.
• Connect the output connectors to your electronic device following the correct polarity.

Power Adjustment

• Use the voltage adjustment settings to set the desired output voltage between 3-12V.
• Ensure that the current draw of your device does not exceed 1.5A to prevent overloading.

Safety Precautions

• Do not expose the SPS 15 to water or moisture to avoid electrical hazards.
• Keep the unit away from heat sources and direct sunlight to prevent overheating.

Reversible polarity

Universal switching power supply unit 1500 mAh, stabilized

• Complies with the newest ECO – EU directives
• Low energy consumption in standby mode
• Short-circuit protected
• Automatic overload and overheat protection
• Reversible polarity
• Output Current: max. 1500 mA
• Output Voltages: 3/ 4.5/ 5/ 6/ 7.5/ 9/ 12 V
• Input: 100 – 240 V, 50/60 Hz

7 adapter plugs included:

• 2x jack plugs: 2.5 and 3.5 mm
• 4x DC plugs: 1.35 x 3.5/2.1 x 5.0/1.5 x 5.5/2.5 x 5.5 mm
• 1x Micro HDMI connector
• Red LED for checking fiction

Important instructions

• Before using the power adapter, always check that the voltage, current, and polarity of the powered appliance match the set values.
• The supplier takes no responsibility for consequences resulting from the incorrect selection of voltage, polarity as well as overcharging.
• First set the voltage and polarity, connect the required appliance, and then connect the adapter to a power socket (100-240 V).
• Use only in enclosed and dry rooms!
• To eliminate the risk of a fire or lightning strike, the power adapter must be protected against moisture.
• If you are not using the appliance, disconnect it from the main power supply.
• Do not use or open a damaged power adapter. Have it repaired at a specialized service center.
• When cleaning, the power adapter must always be disconnected from the mains power supply and it should only be cleaned using a soft wipe.
• The SPS 6 / SPS 10 / SPS 15 power adapter, as well as other electrical devices, do not belong in the hands of children!

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS

Dispose of packaging material at a public waste disposal site.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

• The meaning of the symbol on the product, its accessory, or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste.
• Alternatively in some states of the European Union or other European states, you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help prevent the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection center for further details. The improper disposal of this type of waste may fall subject to national regulations for fines. For business entities in the European Union
• If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.

Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.

This product meets all the basic EU regulation requirements that relate to it.
Changes to the text, design, and technical specifications may occur without prior notice and we reserve the right to make these changes.

SPECIFICATION

FAQ

• Q: Can I use the SPS 15 with devices that require more than 12V?
  • A: No, the SPS 15 is designed for devices that operate within the 3-12V range. Using it with higher voltage devices may cause damage.
• Q: What should I do if the SPS 15 stops working suddenly?
  • A: Check the input power source and connections first. If the issue persists, contact customer support for further assistance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>