Axiom ACC-6084A-AX CFP2 Transceiver for Spirent User Manual

Axiom ACC-6084A-AX CFP2 Transceiver for Spirent

DESCRIPTION

An optical networking module, the Axiom ACC-6084A-AX CFP2 Transceiver was developed specifically for use with the test and measurement equipment manufactured by Spirent. High-speed optical communication is supported by this CFP2 transceiver, which most likely operates at data rates of 100G or greater. Because of its small size, hot-pluggability, and compatibility with Spirent solutions, this device is well suited for the accurate testing and certification of the performance of optical networks. The data transfer in optical networks is made dependable and accurate by the transceiver thanks to features such as diagnostics, monitoring, and firmware updates. Additionally, the transceiver is equipped with standard optical connectors.

SPECIFICATIONS

• Mode: Multi-mode Fiber (MMF)
• Data-rate: 100GBASE-SR10
• **Form factor:*** CFP2
• Connector: 24-fiber MPO/MTP connector
• Wavelength: 850nm
• Product Dimensions: 0.69 x 1.64 x 4.23 inches
• Item Weight: 7.4 ounces
• Item model number: ACC-6084A-AX

WHAT’S IN THE BOX

• Transceiver for Spirent
• User Manual

FEATURES

There is a possibility that the particular features of the Axiom ACC-6084A- AX CFP2 Transceiver for Spirent will vary depending on the model and the specs, however the following is a list of some of the more typical features:

• High-Speed Data Transfer:
  Developed to accommodate high data speeds, such as 100G or greater, in order to facilitate optical communication that is both efficient and quick.

• Form Factor of the CFP2:
  Because the CFP2 form factor guarantees a small design, it is well suited for use in situations in which space is at a premium.

• Connectivity via Optical Light:
  Outfitted with industry-standard optical connections (such as LC or MPO, for example) to ensure smooth integration into optical networks.

• Pluggable when Hot:
  Because of its hot-pluggable architecture, the transceiver can be inserted into or withdrawn from compatible ports without the requirement for the corresponding piece of equipment to be powered down.

• To be compatible with:
  Designed specifically for use with test and measurement equipment manufactured by Spirent, ensuring accurate testing and validation of the performance of optical networks.

• The length of an optical wave:
  Developed to function on particular optical wavelengths in order to satisfy the requirements of a variety of optical network architectures, these devices are designed to be used.

• Monitoring and Testing: Diagnostics
  Probably has diagnostics and monitoring tools for determining how well optical links are functioning and evaluating their overall health.

• Updates to the Firmware:
  There is a possibility that certain models will accept firmware updates, which will make it possible to improve performance and resolve potential problems.

• The reliability of…
  Designed and constructed using components of a high grade to enable accurate data transmission and communication.

• Exactness of Measurement:
  Developed to deliver precise testing findings, which play a role in assisting with the evaluation of the performance of optical networks.

• The Assurance of Quality:
  Produced by Axiom, a company well-known for offering networking solutions of a high quality that strictly adhere to industry standards.

• Particular to the Application:
  The transceiver was developed specifically for use in testing and certifying the performance of optical networks using Spirent’s equipment.

• Utilization Effort:
  Integration and operation within the optical network testing setup are made simple by this offering.

• Integrity of the Data:
  focuses on preventing the corruption of data and reducing the amount of signal that is lost while it is being transmitted.

• Large Scope of Compatibility:
  Suitable for use with a wide variety of optical networking topologies and systems.

• Technology with Advanced Optical Capabilities :
  Data transmission is made more effective thanks to the application of cutting- edge optical components like lasers and photodiodes.

CONNECTIONS

The exact connections that are made by the Axiom ACC-6084A-AX CFP2 Transceiver for Spirent will vary depending on the model and the specs, however the following is a list of the typical connections that are made by the device:

• Connectors for Optical Fibers:
  Optical connectors, which allow for the sending and receiving of optical signals, will be included on the transceiver. It’s possible that these connectors are LC connectors or MPO connectors.

• Connection to the Transmitter:
  The transmitter side of the optical link will be connected to one end of the transceiver, which will result in the transmission of optical signals.

• Connection to the Receiver:
  One end of the transceiver will connect to the transmitter side of the optical link, while the other end will connect to the reception side of the optical link.

• Slot in the Transceiver:
  The Spirent test and measurement equipment will have a compatible CFP2 slot installed, and the CFP2 transceiver will be placed into that slot. This slot allows for data as well as power connections to be made.

• If applicable, the Firmware Update Port will be:
  It’s possible that some transceivers feature a connector for changing the firmware, which can help improve both the device’s performance and its compatibility with other devices.

• Connecting to the Power Grid:
  There is a possibility that the transceiver has power connections either within the CFP2 slot or through additional power pins located on the transceiver itself.

• Ports for Diagnostics and Monitoring (if they are present):
  Depending on the model, there may be ports for diagnostics and monitoring, which will enable you to evaluate the overall health of the optical link as well as its level of performance.

• If appropriate, the Data Rate Indicator will read:
  There are various kinds of transceivers, and some of them incorporate LED indicators or display panels that show the current data rate or the state of the link.

• A Point of Grounding:
  On the transceiver, there might be grounding points that provide correct grounding, which is important for both safety and the integrity of the transmission.

PRECAUTIONS

• Learn from the Guide:
  Before installing or making use of the transceiver, it is important to first familiarize oneself with the user handbook and the installation instructions that were provided by Axiom.

• Equipment That Is Compatible:
  In order to avoid problems with compatibility, you should check to see if the transceiver is compatible with the model of the Spirent test and measurement equipment you are using.

• Power, Voltage, and Energy:
  Always follow the manufacturer’s instructions about the voltage and power sources you use. The transceiver can be damaged if the appropriate voltages are not used.

• Connectors for Optical Fibers:
  Optical connectors require special care while being handled to prevent contamination and damage. Before making any connections, ensure that the connectors have been cleaned and checked for any dirt or debris.

• Updates to the Firmware:
  If performance and compatibility can be improved by updating the firmware, the manufacturer’s recommendations should be followed to ensure that the update is performed correctly.

• Electricity that is Static
  Before touching the transceiver, you should rid your body of any static energy that may build up. Electronic components that are sensitive to damage might be harmed by static discharge.

• Insertion Done Correctly:
  Put some gentle pressure on the transmitter as you insert it into the suitable CFP2 slot on the Spirent device. It is important to avoid applying excessive force whenever possible because this can cause the slot or the transceiver to become damaged.

• Monitoring and Testing: Diagnostics
  Utilize diagnostic and monitoring functions of the optical connection, if available, to maintain the optical link’s continued good health and optimal performance.

• The Conditions of the Environment:
  In order to avoid damage and a degradation of the signal, make sure you only use the transceiver under certain environmental conditions. These requirements include temperature and humidity ranges.

• Administration of Cables:
  Optical cables need to be managed and routed correctly to avoid putting strain on the connectors. This will ensure that the signal quality remains consistent.

• Getting a Grip:
  To maintain a safe and reliable operation and to reduce the danger of electrical hazards, it is important to follow the grounding rules, if they are offered.

• Repairs and upkeep:
  Conduct routine checks to determine whether the optical connectors, cables, and transceiver are showing any symptoms of wear, damage, or contamination. Take fast action regarding any concerns.

• Plugging in directly:
  If the transceiver supports hot-plugging, make sure to use the correct techniques for insertion and removal so that you don’t damage the equipment or the connectors.

• Protection against ESD:
  When working with sensitive components, it is important to prevent electrostatic discharge by wearing wrist straps and using equipment that is anti-static.

• The recommendations of the manufacturer are as follows:
  Ensure that the installation, operation, and upkeep of the transceiver are carried out in accordance with any special guidelines that have been supplied by Axiom.

FREQUENTLY ASKED QUESTIONS

What is the Axiom ACC-6084A-AX CFP2 Transceiver for Spirent?

The Axiom ACC-6084A-AX is a CFP2 (C form-factor pluggable) transceiver module designed for use with Spirent equipment in telecommunications and network testing applications.

What is the primary function of the ACC-6084A-AX CFP2 Transceiver?

The primary function of this transceiver is to provide high-speed and high- capacity data transmission and reception between network equipment, helping with testing and analysis.

What type of data transmission technology does the ACC-6084A-AX support?

The ACC-6084A-AX transceiver typically supports high-speed data transmission using optical fiber technology.

What is the data rate supported by the ACC-6084A-AX CFP2 Transceiver?

The ACC-6084A-AX transceiver commonly supports data rates of 100 Gbps (Gigabits per second).

Is the ACC-6084A-AX transceiver compatible with specific Spirent equipment models?

Yes, this transceiver is designed for compatibility with certain Spirent equipment models that support CFP2 modules.

What is the form factor of the ACC-6084A-AX transceiver?

The ACC-6084A-AX transceiver follows the CFP2 form factor, which is a standardized module size and shape for high-speed optical communication.

What types of networks is the ACC-6084A-AX transceiver suitable for?

The ACC-6084A-AX transceiver is suitable for high-speed data networks, including data centers, telecommunications networks, and network testing environments.

Is this transceiver hot-swappable?

Yes, CFP2 transceivers like the ACC-6084A-AX are designed to be hot-swappable, meaning they can be installed or removed while the host device is operating.

Does the ACC-6084A-AX transceiver support single-mode or multimode fiber?

The type of fiber supported by the ACC-6084A-AX transceiver might vary based on its specific model. It's important to check the specifications to determine if it supports single-mode or multimode fiber.

What is the maximum transmission distance supported by the ACC-6084A-AX transceiver?

The maximum transmission distance might vary based on the specific model of the transceiver. It's best to consult the product specifications for accurate information.

Does the ACC-6084A-AX transceiver require external power?

Yes, the ACC-6084A-AX transceiver typically requires an external power source for its operation.

What is the wavelength range supported by the ACC-6084A-AX transceiver?

The supported wavelength range might vary based on the specific model of the transceiver. Check the specifications for accurate details.

Does the ACC-6084A-AX transceiver support specific optical protocols or standards?

The transceiver might support various optical protocols and standards, such as Ethernet or SONET/SDH. Refer to the specifications for more details.

Can the ACC-6084A-AX transceiver be used for long-haul communication?

CFP2 transceivers are generally designed for high-speed and high-capacity communication, which can include long-haul applications in certain cases.

Can the ACC-6084A-AX transceiver be used in industrial environments?

The suitability of the ACC-6084A-AX transceiver for industrial environments depends on its operating conditions and specifications. It's recommended to review the product documentation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>