BOBRICK B-8236 Top Fill Counter Mounted Manual Foam Soap Dispenser User Guide

BOBRICK B-8236 Top Fill Counter Mounted

Technical Data for Bobrick Top-Fill Counter-Mounted Manual Foam Soap Dispenser

• Model: B-8236

• Dimensions:

  • Spout Length: 4-1/2” (115mm)
  • Overall Height: 6” (150mm)
  • Overall Width: 6-1/16” (155mm)
  • Maximum Mounting Thickness: 3” (75mm)
  • Container Diameter: 2-9/16” (65mm)
  • Clearance Required for Container Diameter: 3-3/8” (85mm)
  • Overall Depth: 9-9/16” (245mm)

• Materials:

  • Spout: Type-304 stainless steel with bright polished
    finish

  • Cover Shell: High polished deep drawn stainless steel

  • Cover Spacer: Rigid, impact-resistant Acetal

  • Escutcheon: Chrome-plated, die-cast metal, concealed locking
    mechanism

  • Integrated Funnel: Red polypropylene plastic

  • Body, Foam Pump and Shank: High-impact-resistant Acetal

  • Valve: High impact resistant Acetal cylinder & piston.
    Stainless steel springs.

  • Container: Translucent, shatter-resistant polyethylene.
    Capacity: 34-fl oz (1.0-L)

• Designer’s Note: Bobrick foam soap dispensers are designed to
  dispense commercially marketed all-purpose foam hand soaps.

Installation Instructions

• The Bobrick Top-Fill Counter-Mounted Manual Foam Soap Dispenser is designed for installation in a 1 (25mm) diameter hole in porcelain-enameled steel, cast-iron or vitreous-china lavatories, as well as in countertops adjacent to lavatories.
• The unit may be mounted in an unused faucet hole or through a special hole requisitioned when the counter is ordered from the manufacturer (specify punching location).
• The shank accommodates a maximum 3 (76mm) mounting thickness and can be cut in the field.
• Clearance required for container diameter is 3-3/8 (85mm).
• Unit is designed for installation in 1″ (25mm) diameter hole in porcelain-enameled steel, cast-iron or vitreous-china lavatories, as well as in countertops adjacent to lavatories.
• Unit may be mounted in unused faucet hole or through special hole requisitioned when counter is ordered from manufacturer (specify punching location).
• Shank accommodates maximum 3″ (76mm) mounting thickness and can be cut in the field. Clearance required for container diameter is 3-3/8″ (85mm).

Product Usage Instructions

1. Fill the container with commercially marketed all-purpose foam hand soap up to the maximum capacity of 34-fl oz (1.0-L).
2. Place the integrated funnel back into the container.
3. Insert the foam pump into the container and screw it in place.
4. Insert the shank of the dispenser into the hole in the lavatory or countertop and secure it in place.
5. Remove the cover shell by unlocking the concealed locking mechanism with a flat-blade screwdriver and lifting it off.
6. Add soap to the dispenser if necessary.
7. Replace the cover shell and lock it into place with the concealed locking mechanism.
8. To dispense soap, place your hand under the spout. The dispenser will automatically dispense foam soap.

MATERIALS

• Spout — Type-304 stainless steel with bright polished finish.
• Cover Shell — High polished deep drawn stainless steel.
• Cover Spacer — Rigid, impact-resistant Acetal.
• Escutcheon — Chrome-plated, die-cast metal, concealed locking mechanism.
• Integrated Funnel — Red polypropylene plastic.
• Body, Foam Pump and Shank — High-impact-resistant Acetal.
• Valve — High impact resistant Acetal cylinder & piston. Stainless steel springs.
• Container — Translucent, shatter-resistant polyethylene. Capacity: 34-fl oz (1.0-L).

Description

OPERATION

Press down on Cover Shell to dispense commercially marketed all-purpose foam soaps. Vandal-resistant spout can rotate 360° without damage to unit. Escutcheon locks to body with concealed locking mechanism that is opened with special key provided. To fill with foam soap only from top, unlock cover and Foam Dispensing assembly. Unit may also be filled by removing container from below counter.

Designer’s Note : Bobrick foam soap dispensers are designed to dispense commercially marketed all-purpose foam hand soaps.

SPECIFICATION

Top-fill counter-mounted manual foam soap dispenser shall dispense 7ml of foam using 0.5ml of commercially marketed foam soaps. Cover shall be constructed of durable high polished deep drawn stainless steel zinc with bright polish finish. Spout assembly shall be Type-304 stainless steel with bright polished finish. Dispenser shall be equipped with integrated funnel to facilitate re- filling of soap. Spout shall rotate 360° without damage to valve mechanism. Escutcheon shall lock to body with concealed locking mechanism that is opened with special key provided. Foam Dispensing assembly shall be removable from top for filling and maintenance. Shank shall accommodate mounting thicknesses up to 3″ (76mm). Translucent, shatter-resistant polyethylene container shall have a capacity of 34-fl oz (1.0-L).

Top-Fill Counter-Mounted Manual Foam Soap Dispenser shall be Model B-8236 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom

Documents / Resources

| BOBRICK B-8236 Top Fill Counter Mounted Manual Foam Soap Dispenser [pdf] User Guide
B-8236, B-8236 Top Fill Counter Mounted Manual Foam Soap Dispenser, Top Fill Counter Mounted Manual Foam Soap Dispenser, Counter Mounted Manual Foam Soap Dispenser, Manual Foam Soap Dispenser, Soap Dispenser, Dispenser
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>