BOBRICK B-8231 Top-Fill Counter-Mounted Manual Foam Soap Dispenser Instruction Manual
- October 30, 2023
- BOBRICK
Table of Contents
B-8231 Top-Fill Counter-Mounted Manual Foam Soap Dispenser
Product Information: TOP-FILL COUNTER-MOUNTED MANUAL FOAM SOAP DISPENSER
The TOP-FILL COUNTER-MOUNTED MANUAL FOAM SOAP DISPENSER is a high-quality product manufactured by Bobrick Washroom Equipment. The dispenser has a capacity of 20-fl oz (0.6-L) and is designed to dispense commercially marketed all-purpose foam hand soaps. The dispenser is made of high-quality materials such as Type-304 stainless steel, deep drawn stainless steel, Acetal, polypropylene plastic, and shatter-resistant polyethylene.
Technical Data
- Model: B-8231
- Spout: Type-304 stainless steel with bright polished finish
- Cover Shell: High polished deep drawn stainless steel
- Cover Spacer: Rigid, impact-resistant Acetal
- Escutcheon: Chrome-plated, die-cast metal, concealed locking mechanism
- Integrated Funnel: Red polypropylene plastic
- Body, Foam Pump and Shank: High-impact-resistant Acetal
- Valve: High impact resistant Acetal cylinder & piston. Stainless steel springs
- Container: Translucent, shatter-resistant polyethylene
- Capacity: 20-fl oz (0.6-L)
- Mounting Thickness: Maximum 3” (75mm)
- Container Diameter Clearance: 3-3/8” (85mm)
Product Usage Instructions
- Ensure that the dispenser is properly installed in a 1 (25mm) diameter hole in porcelain-enameled steel, cast-iron or vitreous-china lavatories, or in countertops adjacent to lavatories. The shank accommodates a maximum 3 (76mm) mounting thickness and can be cut in the field.
- Make sure that the container is properly inserted into the dispenser.
- To fill the dispenser, remove the cover shell by unlocking the concealed locking mechanism. The integrated funnel can be used to pour the foam hand soap into the container.
- Replace the cover shell and lock it using the concealed locking mechanism.
- Press down on the foam pump to dispense the foam hand soap.
- If the foam pump becomes clogged, remove it and rinse it with warm water. Allow it to dry before reinserting it into the dispenser.
Note: The illustrations and descriptions in this Technical Data Sheet are
applicable to production as of the date of publication.
The manufacturer reserves the right to make changes and improvements in
designs and dimensions from time to time.
DAIMENSION
MATERIALS
- Spout — Type-304 stainless steel with bright polished finish.
- Cover Shell — High polished deep drawn stainless steel.
- Cover Spacer — Rigid, impact-resistant Acetal.
- Escutcheon — Chrome-plated, die-cast metal, concealed locking mechanism.
- Integrated Funnel — Red polypropylene plastic.
- Body, Foam Pump and Shank — High-impact-resistant Acetal.
- Valve — High impact resistant Acetal cylinder & piston. Stainless steel springs.
- Container — Translucent, shatter-resistant polyethylene. Capacity: 20-fl oz (0.6-L).
OPERATION
Press down on Cover Shell to dispense commercially marketed all-purpose foam soaps. Vandal-resistant spout can rotate 360° without damage to unit. Escutcheon locks to body with concealed locking mechanism that is opened with special key provided. To fill with foam soap only from top, unlock cover and Foam Dispensing assembly. Unit may also be filled by removing container from below counter. Designer’s Note: Bobrick foam soap dispensers are designed to dispense commercially marketed all-purpose foam hand soaps.
INSTALLATION
Unit is designed for installation in 1″ (25mm) diameter hole in porcelain- enameled steel, cast-iron or vitreous-china lavatories, as well as in countertops adjacent to lavatories. Unit may be mounted in unused faucet hole or through special hole requisitioned when counter is ordered from manufacturer (specify punching location). Shank accommodates maximum 3″ (76mm) mounting thickness and can be cut in the field. Clearance required for container diameter is 3-3/8″ (85mm).
SPECIFICATION
Top-fill counter-mounted manual foam soap dispenser shall dispense 7ml of foam using 0.5ml of commercially marketed foam soaps. Cover shall be constructed of durable high polished deep drawn stainless steel with bright polish finish. Spout assembly shall be Type-304 stainless steel with bright polished finish. Dispenser shall be equipped with integrated funnel to facilitate re-filling of soap. Spout shall rotate 360° without damage to valve mechanism. Escutcheon shall lock to body with concealed locking mechanism that is opened with special key provided. Foam Dispensing assembly shall be removable from top for filling and maintenance. Shank shall accommodate mounting thicknesses up to 3″ (76mm). Translucent, shatter-resistant polyethylene container shall have a capacity of 20-fl oz (0.6-L).
Top-Fill Counter-Mounted Manual Foam Soap Dispenser shall be Model B-82316 of
Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee;
Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom
Equipment Limited,
United Kingdom.
The illustrations and descriptions herein are applicable to production as of
the date of this Technical Data Sheet.
The manufacturer reserves the right to, and does from time to time, make
changes and improvements in designs and dimensions.
Issued 2/17/22
© 2022 by Bobrick Washroom Equipment, Inc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>