BOBRICK B-82316 Top-Fill Counter-Mounted Manual Foam Soap Dispenser Instructions
- October 30, 2023
- BOBRICK
Table of Contents
BOBRICK B-82316 Top-Fill Counter-Mounted Manual Foam Soap Dispenser
Product Information
The TOP-FILL COUNTER-MOUNTED MANUAL FOAM SOAP DISPENSER Model B-82316 by
Bobrick Washroom Equipment is designed for dispensing commercially marketed
all-purpose foam hand soaps. The dispenser is made of various materials
including Type-304 stainless steel,
high-impact-resistant Acetal, polyethylene, and chrome-plated, die-cast metal.
The dispenser has a capacity of 20-fl oz (0.6-L) and comes with a shank that
can be cut in the field for mounting thickness not exceeding 3 (76mm). The
container is translucent and shatter-resistant polyethylene. The dispenser is
designed for installation in 1 (25mm) diameter hole in porcelain-enameled
steel, cast-iron or vitreous-china lavatories, as well as in countertops
adjacent to lavatories. The dispenser is available in different locations
including Clifton Park, New York; Jackson, Tennessee; Los Angeles, California;
Scarborough, Ontario; Australia; and the United Kingdom.
Product Usage Instructions
- Choose a location to install the dispenser. The dispenser is designed for installation in 1 (25mm) diameter hole in porcelain-enameled steel, cast-iron or vitreous-china lavatories, as well as in countertops adjacent to lavatories.
- Make sure the mounting thickness does not exceed 3 (76mm). The shank can be cut in the field if needed.
- Clearance required for container diameter is 3-3/8 (85mm).
- Fill the dispenser with commercially marketed all-purpose foam hand soaps. The dispenser has a capacity of 20-fl oz (0.6-L).
- Press down on the dispenser to dispense the foam soap.
- If needed, refer to the user manual for additional information on maintenance and troubleshooting.
DIMENSION
MATERIALS
- Spout — Type-304 stainless steel with bright polished finish.
- Cover Shell — High polished deep drawn stainless steel.
- Cover Spacer — Rigid, impact-resistant Acetal.
- Escutcheon — Chrome-plated, die-cast metal, concealed locking mechanism.
- Integrated Funnel — Red polypropylene plastic.
- Body, Foam Pump and Shank — High-impact-resistant Acetal.
- Valve — High impact resistant Acetal cylinder & piston. Stainless steel springs.
- Container — Translucent, shatter-resistant polyethylene. Capacity: 20-fl oz (0.6-L).
OPERATION
Press down on Cover Shell to dispense commercially marketed all-purpose foam soaps. Vandal-resistant spout can rotate 360° without damage to unit. Escutcheon locks to body with concealed locking mechanism that is opened with special key provided. To fill with foam soap only from top, unlock cover and Foam Dispensing assembly. Unit may also be filled by removing container from below counter. Designer’s Note: Bobrick foam soap dispensers are designed to dispense commercially marketed all-purpose foam hand soaps.
INSTALLATION
Unit is designed for installation in 1″ (25mm) diameter hole in porcelain- enameled steel, cast-iron or vitreous-china lavatories, as well as in countertops adjacent to lavatories. Unit may be mounted in unused faucet hole or through special hole requisitioned when counter is ordered from manufacturer (specify punching location). Shank accommodates maximum 3″ (76mm) mounting thickness and can be cut in the field. Clearance required for container diameter is 3-3/8″ (85mm).
SPECIFICATION:
Top-fill counter-mounted manual foam soap dispenser shall dispense 7ml of foam using 0.5ml of commercially marketed foam soaps. Cover shall be constructed of durable high polished deep drawn stainless steel with bright polish finish. Spout assembly shall be Type-304 stainless steel with bright polished finish. Dispenser shall be equipped with integrated funnel to facilitate re-filling of soap. Spout shall rotate 360° without damage to valve mechanism. Escutcheon shall lock to body with concealed locking mechanism that is opened with special key provided. Foam Dispensing assembly shall be removable from top for filling and maintenance. Shank shall accommodate mounting thicknesses up to 3″ (76mm). Translucent, shatter-resistant polyethylene container shall have a capacity of 20-fl oz (0.6-L).
Top-Fill Counter-Mounted Manual Foam Soap Dispenser shall be Model B-82316 of
Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee;
Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom
Equipment Limited,
United Kingdom.
The illustrations and descriptions herein are applicable to production as of
the date of this Technical Data Sheet.
The manufacturer reserves the right to, and does from time to time, make
changes and improvements in designs and dimensions.
Issued 2/17/22
© 2022 by Bobrick Washroom Equipment, Inc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>