TOOLOTS C130 130W CO2 Laser Tube User Manual
- October 30, 2023
- TOOLOTS
Table of Contents
TOOLOTS C130 130W CO2 Laser Tube
Product Information
Professional co2 glass laser tube, mainly used in laser engraving machine, laser cutting machine. It is a spare part for laser machines that can engrave and cut acrylic, cloth, leather, bamboo, wood ,paper and most of other non metal materials. Our CO2 laser tube in model#C130 130W The C130 130W CO2 Laser Tube is a professional glass laser tube designed for use in laser engraving and cutting machines. It is a spare part that provides strong energy laser during engraving and cutting of non-metallic materials such as acrylic, cloth, leather, bamboo, wood, and paper. The laser tube adopts German Schott discharge tube and special coating technology to improve its performance, making it a reliable and efficient choice for your laser machine. (1650mm*80mm) adopts the uses German Schott discharge tube and special coating technology to improve the performance of the laser tube. It is definitely your best choice!
Features & Details
- HIGH-TEMPERATURE RESISTANCE】- This co2 laser tube is made of boron silicate glass that is also applied on solar tubes. It is resistant to high temperatures and high pressure.
- TEMOO MODE】- This co2 laser tube adopts the TEMOO mode, which is characterized by high spot concentration, high energy density as well as good and stable spot. At the same time, the use of output mirrors further enhances the mode.
- SPECIAL COATING TECHNOLOGY】- The inside of the discharge tube (imported German Schott tube)uses special coating technology. The coating is a reduction catalyst mixed with materials such as rare earth and gold.
- LONGER SERVICE LIFE】- Our service life of discharge tubes coated with special catalysts is much improved. Compared with other same kind laser cutting tubes, our 130W co2 laser can last longer.
- VARIOUS APPLICATION】 – Model#C130 130W co2 laser tube is very Professional, as the main spare parts of co2 laser engraving and cutting machine, it supplies for the strong energy “laser” during engraving and cutting.
- Professional CO2 glass laser tube
- Mainly used in laser engraving and cutting machines
- Spare part for laser machines
- Engraves and cuts non-metallic materials
- Adopts German Schott discharge tube and special coating technology to improve performance
Technical Parameters
- Rated power output: 130W
- Length: 1650mm
- Beam diameter: 5mm
- Wavelength: 10.6um
- Material: Boron Silicate Glass
- Outer diameter: 80mm
- Trigger voltage: 28KV
- Working voltage: 18KV
- Optimal operating current: 24mA
- Gross Weight: 6.8kg(14.99lbs)
- Package Size: 180.8 x 17.5 x 20.5cm/71.18 x 6.89 x 8.07inch
Product Usage
The C130 130W CO2 Laser Tube is designed to be used as a spare part for laser engraving and cutting machines. It provides strong energy laser during engraving and cutting of non-metallic materials.
To use the product, follow the below instructions:
- Ensure that the laser machine is turned off and unplugged before installing the laser tube.
- Remove the old laser tube from the machine and disconnect all electrical connections.
- Install the new laser tube in the same position as the old one.
- Reconnect all electrical connections to the new laser tube.
- Turn on the laser machine and test the new laser tube to ensure it is working correctly.
Note: It is recommended to seek professional assistance for installation and testing of the C130 130W CO2 Laser Tube.
Installation Drawing
PRODUCT LIST
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>