TOOLOTS F2-20CC 20 Port iPad and Tablets Storage and Charging Trolley User Manual

TOOLOTS F2-20CC 20 Port iPad and Tablets Storage and Charging Trolley

Introduction

Please read this User Manual, as it contains information about the wonderful features of this Charging Trolley as well as some tips to make more enjoyable.

Important

• Read this user manual carefully before you use the appliance. Save it for future reference.

Danger

• Make sure the AC power section {plug/socket) does not get wet.

Specification

Charging Standard Complied with

| Apple2.4A{Divider1/2/3)

Samsung{D+/D- 1.2V), BC 1.2

Charging Ability| 20pcs USB-C Device
LED Indicators| Green: Fully Charged/No Load

Red: Charging

Slot Size| 11.02xa.21xo.71″
Case Size| 26.18×19.33×13.46″

Charge

1. Put the charging trolley on flat surface near an AC socket. Ensure the ventilation system not be covered.
2. Open the charging trolley.
3. Insert the power cord plug into the external connector of charging trolley and connect the other end with AC socket.
4. Press “I” to power the USB ports.
5. Put tablets into the inner compartments of trolley, connect USB ports and tablets with USB cables, then tablets are charged.
   • Tips: The USB cables can be easily managed by tying them up into small loops.

Cleaning

• Always unplug the charging trolley before you clean it.
• Clean surface with a soft dry cloth.

Storage

• Store charging trolley in the conditions of temperature -13 ~ 122 and relative humidity 20-90% RH non-condensing.

Move and Transportation

1. Press “O” to turn off the power
2. Disconnect the USB cables to the tablets.
3. Unplug the AC power cord and storage it well.
4. Close the charging trolley and lock latches.

Environment

• Do not throw away the appliance as the normal household waste, but hand them in at an official collection point for recycling.
• By doing this, you help to preserve the environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>