TOOLOTS C11-10C Multi Device 10 Port Charging Station User Manual
- October 30, 2023
- TOOLOTS
Table of Contents
TOOLOTS C11-10C Multi Device 10 Port Charging Station
Introduction
Please read this User Manual, as it contains information about the wonderful features of this Charging Trolley as well as some tips to make it more enjoyable.
Important
Read this user manual carefully before you use the appliance. Save it for
future reference.
Danger
Make sure the AC power section {plug/socket) does not get wet.
Specification
Charge
- Put the charging trolley on a flat surface near an AC socket. Ensure the ventilation system not be covered.
- Open the charging trolley.
- insert the power cord plug into the external connector of the charging trolley, press down the silver slider, and with it pointing upwards. Then tum the plug to the right until the slider clicks into place and connect the other end with the AC socket.
- Press “I” to power the charging trolley.
- Put tablets into the inner compartments of the trolley, connect USB ports and tablets with USB cables, then tablets are charged. Tips: The USB cables can be easily managed by tying them up into small loops.
Cleaning
- Always unplug the charging trolley before you clean it.
- Clean the surface with a dry damp cloth.
Storage
Store charging trolley in the conditions of temperature -13 ~ 122 and relative humidity 20-90% RH non-condensing.
Move and Transportation
- Press “O” to tum off the power
- Unplug the USB cables.
- Unplug the AC power cord.
- Make sure all the accessories are stored well in the correct position.
- Close the charging trolley and lock the latches.
Environment
Do not throw away the appliance as normal household waste, but hand them in at an official collection point for recycling. By doing this, you help to preserve the environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>