TOOLOTS CK101 Heat Press Machine Instructions
- October 30, 2023
- TOOLOTS
Table of Contents
TOOLOTS CK101 Heat Press Machine Instructions
HEAT PRESS MAHCINE INSTRUCTION
CK101
The press can provid hight pressuer and timingdrawing out table. Using for
prssing oil, printing textiles and other materials may be used on food,
t•shirts, mouse pads, puzzles, ceramic tiles, and other flat surfaces items by
using the flex, flocking transfer printing paper, sublimation etc.
COMPLY WITH THESE INSTRUCTIONS
- Do not put the wire on heating plates cover.
- Do not touch heating plates when it is energted.Caution: Risk of burns.
- Do not open the machine box and make changes to the device.
- Do not allow liquid or metal objects inside the hot press.
- Make ensure the machine is connected with a plug connected to the mass.
- Don’t pull the cable to disconnect the plug.
- Power off he machine when finish using.
- Use extreme caution when using near children.
- Make sure that the device is used in an environment.
Set Temperature
-
Press STE button
-
“Temperature setting”blink
-
Press arrows “A”or”V'”adjust temp you need
Set time
-
Press SET button after setting temp
-
Press arrows “A”or”V”adjust you need
-
Press SET button after setting
Printing
when the machine has reached the desired temperature, Put objects on table,push it into machine,Press the two buttons on the left and right side,machine start to press down and time,when time is up,machine open automatic, pull out the table and pick up the objects.
Common Problem:
| Problem| Cause| Handling methods
---|---|---|---
1| Fails to heat up,but display well| Heating plate or Relay broken| Check the
heating plate or Relay
2| Power on but controller Screen out| Controller brocken orConnection line of
controller loosen| Check connection line or change a new controller
3| No action after turn on power| Plug whether touch well Fuse whether burn|
Check the plug and fuse
4| The real temp pass over setting temp| Relay broken| Replace the relay