TOOLOTS 8600 Electric Creasing Machine Instruction Manual
- October 30, 2023
- TOOLOTS
Table of Contents
TOOLOTS 8600 Electric Creasing Machine Instruction Manual
Component instructions
- Cover
- Knife frame
- Head screw
- Pressure adjusting screw
- Delivery board
- White bottom wheel
- Lower creasing wheel
- Right paper positioning device
- Adjusting screw
- Left paper positioning device
- Power line
- Power switch
- Perforating wheel
- Upper creasing wheel
- Sheet transfer wheel
Operation instruction
- Take out the machine, put on the flat table.
- Plug in, turn on the power switch, check the machine if it canrunat constant speed.
- Adjust the left and right positioning devices according to the papersize, the scale only for reference, you can fine adjust for the specificsize.
- Adjust the creasing position and creasing number according toyourneed, make the convex part of upper creasing wheel aimat theconcave part of the lower wheel on the creasing position.
- Put in suitable paper, adjust the pressure of creasing wheels andsheet transfer wheels. Turn the screw clockwise to add pressure, turnthescrew anticlockwise to lower pressure. Different paper with different pressure.
- Continue feeding paper manually, the creasing operation finished.
- If you want to do perforate/slit, adjust the perforating/slittingwheel and the lower white bottom wheel to the suitable position, adjust thepressure to do perforate/slit. (The adjusting methods of pressurearethe same as the creasing wheel.)
Parameter
| Model | 8600 Electric Creasing Machine |
|---|---|
| Creasing Wheel | 2 |
| Sheet Transfer Wheel | 2 |
| Perforating Wheel | 1 |
| Slitting Wheel | 1 |
| Power Supply | 110V/60HZ |
| Packing Size | 23.23″×14.57″×9.45″ (590×370×240mm) |
| Machine Weigh | 26.5lb(12KG) |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>