TOOLOTS 8801 Electric Round-Corner Cutter User Manual
- October 30, 2023
- TOOLOTS
Table of Contents
TOOLOTS 8801 Electric Round-Corner Cutter
Product Usage
It is used for round-angle cutting to the soft materials such as paper in the printing and packaging industry.
Product Characteristics
- It is firstly innovated in the homeland with the optional type cutter head with 7 kinds of knifes which can be fast changed within 30 seconds.
- It can cut with large quantity while its electric operation, which can save the labor cost with good quality and high efficiency.
Technical Parameters
| Max. Angle | R10 |
|---|---|
| Min. Angle | R3 |
| Max. Cutting Height | 2.76″ (70mm ) |
| Working Frequency | 60 times/min |
| Power Supply | 110V/180W |
| Packing Size | 17.7″×13.4″×26″ (450×340×660mm) |
| Machine Weight | 100 lbs (45KGS) |
| Number of knives | 7 (R3,R4,R5,R6,R8,R9,R10) |
Component Instructions
- Device of changing knife
- Cover
- Switch of changing knife
- Lay guide
- Work table
- Paper scrap box
- Plastic handle
- Emergency stop button
- Foot switch
- Inching switch
- Power switch
Notice
- Oil-free operation is strictly prohibited.
- Because knives are sharp, it is prohibited that you put foreign matter into the machine to avoid harm.
Operation Procedures
- Plug in.
- Put 30# machine oil on the slide bar.
- According to the size of round-corner needed, select the corresponding round-corner knife, put paper on the work table (5) and against the lay guide (4) then stamp the foot switch (9) to finish cutting.
Adjustment
Adjustment of lay guide:
Press the emergency stop button (8), press lightly inching switch (10), make
the knife fall down, then use the tool setting device to make lay guide
perpendicular to knife, finally tighten the screws of lay guide.
Read User Manual Online (PDF format)
Loading......