SAMSUNG LACH-M1-B Low Ambient Cooling Guard Instruction Manual
- October 30, 2023
- Samsung
Table of Contents
SAMSUNG LACH-M1-B Low Ambient Cooling Guard
Product Information
The product is equipped with Low Ambient Cooling, which is a feature that allows the unit to operate efficiently in low temperatures. It also has QVWDOODWLRQ, QVWUXFWLRQV)URQW which provides optimal cooling performance. The product comes with a front guard that needs to be installed properly to ensure the safety of the unit and its components. The guard is secured to the unit using self-tapping screws that are provided in the package.
Product Usage Instructions
When installing the front guard, it is important to follow these steps:
- Carefully lift the guard up to the exposed coil in the front of the unit, guided by the left side lip.
- Straighten the guard taking care not to scratch the outdoor unit finish or damage the coil.
- Make sure the top of the guard is level and secure it to the unit with the provided self-tapping screws.
- Secure the guard to the unit using all provided screw holes. Never use screws longer than the screws that are included with LACH-F1-B to prevent damage to the outdoor unit components.
- Examine outdoor unit refrigerant pipe and coil locations inside the chassis before installing screws to prevent unit damage.
For further information and assistance, please refer to the outdoor unit installation manual provided at www.SamsungHVAC.com.
Low Ambient Cooling Guard Installation Instructions (Front)
WARNING: This product has sharp edges. Wear protective clothing, eye
protection, and gloves during installation to prevent personal injury.
ATTENTION: Take extreme care during installation to prevent damage to the
outdoor unit coil.
- DVM S2 guard models: LACH-F1-B
- Parts included: LACH-F1-B guard, installation screws
NOTE
- To prevent personal injury or damage to the outdoor unit, it is recommended that at least two (2) people install the guard.
- Clearance around the outdoor unit must be at least 12″ greater than standard clearances (“unrestricted” wall height clearances in the outdoor unit installation manual) when using the front guard.
- LACH-F1-B can only be installed on the front side of the outdoor unit.
- LACH-F1-B is designed to be used in conjunction with LACH-1-B, LACH-2-B, and LACH-3-B low ambient cooling hoods, LACH-SL-B and LACH-SR-B rear guards and LACH-R1-B and LACH-R2-B rear guards. Front, side, and rear guards and a low ambient cooling hood must be used for low ambient cooling applications.
INSTALLATION INSTRUCTIONS
- Carefully lift the guard up to the exposed coil in the front of the unit, guided by the left side lip, and straighten the guard taking care not to scratch the outdoor unit finish or damage the coil.
- Make sure the top of the guard is level. Secure the guard to the unit with the provided self-tapping screws. Secure the guard to the unit using all provided screw holes. Never use screws longer than the screws that are included with LACH-F1-B to prevent damage to the outdoor unit components.
- Examine outdoor unit refrigerant pipe and coil locations inside the chassis before installing screws to prevent unit damage.
@ 2022 Samsung HVAC SHA-LACH-B-11102022. www.SamsungHVAC.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>