belkin F8J023 USB-A to Lightning Cable User Manual
- June 10, 2024
- belkin
Table of Contents
belkin F8J023 USB-A to Lightning Cable
Belkin Lightning to Use Cable
The Belkin Lightning to Use Cable is a digital apparatus that complies with CAN ICES-3(8)/NMB-3 (B) IC Statement. It is also in conformity with EMC Directive 2014/30/EU & 2009/125/EC RoHS Directive 2011/65/EU (Recast) as stated in the CE Declaration of Conformity by Belkin International, Inc.
Product Usage Instructions
Before using the Belkin Lightning to Use Cable, please be aware of the following:
- Do not make any changes or modifications to the product as it could void the user’s authority to operate the equipment.
- If interference is experienced with the radio or TV reception, try reorienting or relocating the receiving antenna, increasing the separation between equipment and receiver or consulting an experienced radio/TV technician for help.
Warning: The device may cause harmful interference if not installed and used in accordance with the instructions provided. It has been tested and satisfied to the limits established for class B digital devices according to FCC regulations. The device generates, uses, and can radiate radio frequency energy. If the equipment causes interference with radio or television reception, which can be determined by turning the device on and off, users are advised to take one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 555 S Aviation Blvd. Suite 180, El Segundo,
CA 90245-4852, CA 90094. declare under our sole responsibility that the
product, SKU No: F8J023, to which this declaration relates, complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver 1s connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could voi the user’s authority to operate this equipment.
IMPORTANT NOTE: Industry Canada Statement
This device complies with ICES-003 of the Industry Canada Rules. Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference. including interference that may cause undesired operation of the device.
Ce dispositlf est conforme a la norme CNR- standards d’lndustrie Canada applicable aux appareils radio exempts de licence.
IC Statement:
This digital apparatus complies with CAN ICES-3(B)/NMB-3 (B).
CE Declaration of Conformity
We. Belkin International, Inc., declare under our sole responsibility that the product F8J023, to which this declaration relates, is in conformity with EMC Directive 2014/30/EU & 2009/125/EC RoHS Directive 2011/65/EU (Recast).
We further declare that the product meets the essential requirement of the above Directives. The limits contain in these articles are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>