Cloudy Bay CB615CKBLWH-6PK Smart LED Lighting Fixtures Instruction Manual

Cloudy Bay CB615CKBLWH-6PK Smart LED Lighting Fixtures

Product Information

CB615CKBLWH-6PK Smart LED Lighting Fixture

The CB615CKBLWH-6PK is a Smart LED Lighting Fixture from Cloudybay designed for recessed can installation. This fixture operates on regular household power (120V, 60Hz) and is JA8-2022 certified. The package includes an LED downlight, a medium base adapter, a user manual, and a control guide. The fixture is designed to be grounded properly and all electrical connections must be in accordance with local and National Electrical Code (N.E.C) standards. This fixture has no lamp/bulb to replace and is not intended for use with emergency exits.

Product Usage Instructions

Before installing the fixture, turn off the power at the fuse or circuit breaker. Properly ground the electrical enclosure and ensure that the outlet box is properly grounded. It is important to read all instructions in the manual carefully before installation.

1. Remove the fixture and mounting components from the box.
2. Check that all parts are present by referring to the illustration instructions.
3. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
4. Make electrical connections in accordance with local and National Electrical Code (N.E.C) standards.
5. If using a dimmer switch, set it to the highest level only. If light performance is not good, change to a regular On/Off switch instead.
6. If you encounter any problems with the product due to non-human reasons, contact customer service for a brand-new replacement or a full refund.
7. If you are not completely satisfied with the product after installation but prefer not to disassemble it, contact customer service for comparable compensation.

It is important to follow all safety instructions and precautions while installing or servicing the fixture. The product comes with a 3-Year Limited Warranty and complies with FCC Class B digital device standards.

FEATURES

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C) standards. If you are unfam山ar with proper electrical wiring connections, contact and obtain the services of a qualified elect「ician. Use UL or IEC-approved wire only for input/output connections. Remove fixture and mounting components from the box, and make sure that no parts are missing, by referencing the illustration in the illustration instructions. retrofit assembly is accepted as a component of a led luminaire where the suitability of the combination shall be determined by CSA or Canadian authorities having jurisdiction. This device is not intended for use with emergency exits.

Turn the power off before installation, inspection, or removal. Use all necessary p「ecautions while performing this procedure. Properly ground electrical enclosure. IT IS IMPERATIVE THAT THE OUTLET BOX BE PROPERLY GROUNDED. DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS, OTHERWISE, SAFETY WILL BE COMPROMISED. This Integrated LED Fixture has no lamp/bulb to replace.
WARNING – RISK OF ELECTRIC SHOCK. DISCONNECT THE MAIN POWER AT THE FUSE OR CIRCUIT BREAKER BEFORE INSTALLING OR SERVICING THE FIXTURE.

PRODUCT CAREAfter Sales Service

1. Please discontinue using the product right away if the product shows any visible defect and contact customer service.
2. If there is any problem with our lights for non-human reasons, please contact customer service, and we will send you a brand-new replacement without need to return goods or a full refund.
3. If you are not completely satisfied with the product after installation but prefer not to disassemble it, contact us right away, and we will provide comparable compensation.

3-Year Limited Warranty

LIMITED WARRANTY: This fixture is warranted to be free from defects in workmanship and material for up to 3 years. Based upon reasonable household usage, when used in accordance with the package and included instructions. If this fixture does not last for the time period guaranteed, the manufacturer will send you a replacement fixture upon receipt of the returned fixture, register receipt, and proof of purchase. To contact us, please email us at smart@cloudybaylighting.com to find out how to return the fixture. We are committed to making high-quality products. Returning the fixture will help us monitor and further improve product quality. This replacement is the sole remedy available, and LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED

IMPORTANT SAFETY INFORMATION I READ ALL INSTRUCTIONS BEFORE INSTALLATION This fixture operates on regular household power (120V, 60Hz). This fixture needs to be grounded. Disconnect the power at the breaker panel before installing this product.
GENERAL INSTRUCTIONS
Electrical connections must be made in accordance with local electrical codes and regulations. Consult a qualified electrician to ensure the correct branch circuit conductor.

Package Content

WARNING

• Risk of fire or electrical shock. LED Panel installation requires knowledge of luminaire electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. The use of a licensed electrician is highly recommended.
• As with all electrical components, there is always a risk of fire or electric shock if handled and/or installed incorrectly.
• Disconnect power at the circuit breaker panel before any installation.
• Install this product only in situations as per the general instructions above.
• Do not make or alter any open holes in any enclosure or any electrical component during installation.
• To prevent w1rmg damage or abrasion to the wires do not expose wiring to sharp edges of sheer metal or other sharp objects.
• Do not use it when the enclosure is damaged or broken in any way.
• Do not alter, relocate or remove the wiring, lamp holder power supply, or any other electrical component.
• Minimum operating temperature 4°F (-15.5°(). Lamp life may be affected outside these temperatures.

Note: This product is a smart light, using Direct Digital Controls rather than triac dimming. Here is two dimming way for your reference

1. Download Cloudy Bay’s APP, go to the product group or single product page, adjust the brightness and CCT of white light or color light on the control panel; you can also go to the home page, click product group or single product’s common function, adjust brightness and color temperature
2. Control with smart voice devices such as Google Assistant or Amazon Alexa if you have installed it successfully.

If you only have a dimmer at hand, set it to the highest level only, if light performance is not good, we strongly advise you to change to a regular On/Off switch instead.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

INSTALLATION

INSTALLATION INTO EXISTING RECESSED FIXTURE WITH COMPATIBLE ORANGE CONNECTORS

1. Remove the existing trim installed in the recessed housing (if necessary).
2. Discard the medium base adapter.
3. Connect the two terminals together
4. Insert the torsion springs into the fixture housing brackets. Gently push the product up and torsion springs so they begin to expand and lift the product in place.
5. Gently push the product in until it is flush to the ceiling.
6. Refer to Owner Manual and Voice Cont「ol Guide to set up products.

INSTALLATION INSTRUCTIONS FOR EXISTING RECESSED FIXTURE

1. Remove the existing trim installed in the recessed housing (if necessary).
2. If applicable, slide the lamp holder bracket to its upward maximum position. If necessary, remove the lamp holder mounting bracket by removing the wing nut and the lamp holder from the bracket, then attach the provided label to the existing luminaire.
3. Install the medium base adapter into the socket.
4. Connect the two terminals together.
5. Insert the torsion springs into the fixture housing brackets.
6. Gently push the product in until it is flush to the ceiling.
7. Refer to Owner Manual and Voice Control Guide to set up products.

QUESTIONS? COMMENTS? SUGGESTIONS? COMPLAINT S?
Please contact us through smart@cloudybaylighting.com or info@cloudybaylighting.com We will do our best to make it right for you. Thank you very much!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>