SKYDANCE S1-K AC Triac Rotary Glass Panel Dimmer User Manual
- June 10, 2024
- SKYDANCE
Table of Contents
S1-K AC Triac Rotary Glass Panel Dimmer
Product Information: AC Triac Rotary Glass Panel Dimmer Model No.: S1-K
The AC Triac Rotary Glass Panel Dimmer Model No.: S1-K is a wireless dimmer
that can be used to control the brightness of dimmable LED lamps, Triac
dimmable LED drivers, incandescent lighting, and HV halogen lamps. It features
a rotary knob and a glass panel for easy and convenient use. The dimmer can be
controlled wirelessly using an RF remote control with a control distance of up
to 10m in barrier-free space. It has 256 dimming
levels and a dimming range of 0-100%. The dimmer is compatible with loads up
to 400W at 220V and 200W at 110V for incandescent lighting and HV halogen
lamps, and up to 200W at 220V and 100W at 110V for dimmable LED lamps and
Triac dimmable LED drivers.
Features:
- Rotary dimming
- Glass panel
- Leading edge or trailing edge
- Wireless remote control
- LVD (Low Voltage Directive) compliant
Technical Parameters:
- Input voltage: AC100-240V
- Output voltage: AC100-240V
- Output current: Max 1.5A
- Output power: 150-360W
- EMC standard: ETSI EN 301 489-1 V2.2.3
- Safety standard: ETSI EN 301 489-17 V3.2.4, EN 62368-1:2020+A11:2020
- Radio Equipment standard: ETSI EN 300 328 V2.2.2
- Certification: CE, EMC, LVD, RED
Environment:
- Operation temperature: -30 OC ~ +55 OC
- Case temperature (Max.): +85OC
- IP rating: IP20
- Weight: Net weight 0.181kg, Gross weight 0.234kg
Warranty:
The AC Triac Rotary Glass Panel Dimmer Model No.: S1-K comes with a 5-year warranty.
Compatible Load Types:
- Dimmable LED lamps
- Triac dimmable LED drivers
- Incandescent lighting
- HV halogen lamps
Mechanical Structures and Installations:
The AC Triac Rotary Glass Panel Dimmer Model No.: S1-K has an 86mm x 52mm size and is designed for European-style installations. It features a match key, a DIP switch for leading edge or trailing edge phase-cut select, AC L output, and AC N output. The dimmer can be installed using the typical base as shown in the installation diagram.
Product Usage Instructions
Installation:
Before installation, carefully ensure all wire connections and polarities are correct and secure before applying power to prevent damage to the dimmer. Follow the wiring diagram provided in the user manual to connect the dimmer to the load type you intend to use it with. The dimmer can be connected to dimmable LED lights or Triac dimmable LED drivers using the AC100-240V input and output connections. Make sure the surge current of the load type does not exceed 2 times 65A to prevent overloading and damaging the product.
Usage
To turn on or off the light, push the knob. After turning on the light,
rotate the knob to adjust brightness. The knob can be rotated up to 2.5 turns
with 50 levels of brightness adjustment. To make continuous brightness
adjustments, long push (1-6s) the knob.Rotary dimming/Glass panel/Leading edge
or trailing edge/Wireless remote control
The dimmer can be controlled wirelessly using the RF remote control provided
with a control distance of up to 10m in barrier-free space.
AC Triac Rotary Glass Panel Dimmer
Model No. : S1-K
Rotary dimming/Glass panel/Leading edge or trailing edge/Wireless remote
control
Features
- Rotary glass panel AC phase-cut dimmer, 1 channel output.
- To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights.
- Rotate knob to change brightness, support push and long push operation.
- 256 levels 0-100% dimming smoothly without any flash.
- Leading edge dimming or trailing edge dimming set by dip switch.
- Light on/off fade time 3s selectable.
- Compatibility with RF 2.4G single zone or multiple zone dimming remote control.
- Over-heat / Over-load protection, recover automatically.
- White & Black glass panel available.
Technical Parameters
Input and Output
Input voltage| AC100-240V
Output voltage| AC100-240V
Output current| Max 1.5A
Output power| 150-360W
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Warranty
- Warranty 5 years
Dimming data
Input signal| Rotary knob + RF 2.4GHz
RF Control distance| 10m(Barrier-free space)
Dimming level| 256 levels
Dimming range| 0 -100%
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +85OC
IP rating| IP20
Weight
Net weight| 0.181kg
Gross weight| 0.234kg
Compatible Load Types
| Load Type | Maximum Load | Remarks |
|---|---|---|
| Dimmable LED lamps | 200W @ 220V | |
| 100W @ 110V | Due to variety of LED lamp designs, maximum number of LED lamps |
is further dependent on power factor result when connected to dimmer.
Triac Dimmable LED drivers| 200W @ 220V
100W @ 110V| Maximum permitted number of drivers is 200W divided by driver
nameplate power rating, and make sure the surge current is no more than 2
times 65A.
Incandescent lighting, HV Halogen lamps| 400W @ 220V
200W @ 110V|
Mechanical Structures and Installations
Installation diagram:
Typical base as below:
Knob function
-
Push: Turn on or off light.
After turn on light: -
Rotate: Rotate knob to adjust brightness, 2.5 turns, 50 levels.
-
Long push(1-6s): Continuous 256 levels brightness adjustment.
Wiring diagram
Caution: Please carefully ensure all wire connections and polarities are
correct and secure before applying power, otherwise this controller will be
damaged.
- Connect with dimmable LED light
- Connect with Triac dimmable LED driver
Note: When calculating the maximum number of load lamps or drivers, the
input power or input current parameters of a single lamp or driver must be
used, the output power parameters can not be used.
In addition, the maximum surge current of the dimmer is 65A, the sum of surge
current of multiple dimmable LED drivers should not exceed 2 times. otherwise,
the product will be overloaded and damaged.
Leading edge or trailing edge dimming setting
Select leading edge(forward-phase) dimmer or trailing edge(reverse-phase)
dimmer according to dimmable LED light or driver.
Forward-phase control dimmer(TRIAC) 
Reverse-phase control dimmer
Caution: before power on, you must confirm the selection of dip switch.
Min brightness setting
Long press Min set key for 2s, the light blink 2 times, ready for min
brightness set, then short press Min set key 1-6 times, to get 6 min
brightness: 5%, 10%, 15%, 20%, 25% or 30%, the light will output the current
min brightness immediately,
Long press Min set key for 2s or wait 8s, quit min brightness set, the light
will output 100% brightness automatically.
Light on/off fade time
Long press Match key 5s, then short press Match key 3 times, the light on/off
time will be set to 3s, the indicator light blink 3 times.
Long press Match key 10s, restore factory default parameter, the light on/off
time also restore to 0.5s.
Match Remote Control (three match ways)
The AC triac rotary panel dimmer can also match with the RF dimming remote
(optional).
End user can choose the suitable match/delete ways. Three options are offered
for selection:
Use Match key
- Match: Short press Match key, immediately press on/off key(single zone remote) or zone key(multiple zone remote) of the remote. Delete: Press and hold Match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.
Use Knob
- Match: Turn on light, turn off, immediately push the knob for 5s, then press on/off key (single zone remote) or zone key (multiple zone remote) of the RF remote within 5s. The LED indicator fast flash 3 times means match is successful.
- Delete: Turn on light, turn off, immediately push the knob for 10s to delete all match, The LED indicator fast flash 6 times means all matched remotes were deleted.
Use Power Restart
- Match: Switch off the power, then switch on power, repeat again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
- Delete: Switch off the power, then switch on power, repeat again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>