REHAU NEA SMART 2.0 Room Thermostat Installation Guide
- June 10, 2024
- REHAU
Table of Contents
NEA SMART 2.0 Room Thermostat
VIEW ALL REHAU THERMOSTAT MANUALS
Product Information: NEA SMART 2.0 R-Module 230 V
The NEA SMART 2.0 R-Module 230 V is a wireless connection-type radio system that complies with Directive 2014/53/EU. The manufacturer of the product is REHAU AG + Co. The product requires professional knowledge equivalent to officially recognized professions such as electricians or electronics technicians for installation.
The installation must be carried out in accordance with the applicable national regulations and the local guidelines of the electricity supplier. The user manual for the product is available at www.rehau.com/neasmart2.
The electrical installation must be carried out in a voltage-free state. The system is live and can cause danger to life due to electrical voltage. Before opening, always disconnect from the mains and secure all system components so that they cannot be accidentally switched on. Check for the absence of voltage before starting any installation work.
Product Usage Instructions
- Ensure that you have professional knowledge equivalent to officially recognized professions such as electricians or electronics technicians for installation.
- Read the user manual carefully before starting the installation work.
- Disconnect from the mains before opening and secure all system components to prevent accidental activation.
- Check for the absence of voltage before starting any installation work.
- Carry out all installation work in a voltage-free state.
- After installation, connect to the final power supply network only after completing the installation work.
- For more information on the product, refer to the user manual available at www.rehau.com/neasmart2.
Safety Instructions and Product Conformity
Risk of life through electrical shock! The electrical installation must follow
the applicable national standards and guidelines as well as any specific
requirements of your local energy supplier. These instructions are intended
for use by a qualified person who is holding an official certificate in one of
the following professions: electrician or electronics engineer.
Always read the instructions prior to commencing the installation. Connection
to the final power supply must only be carried out after the installation is
complete.
Hereby, REHAU AG + Co declares that the radio equipment type Nea Smart 2.0 is
in compliance with Directive 2014/53/EU. The full text of the EU Declaration
of conformity is available at the following internet address:
www.rehau.com/neasmart2
System Overview
Scope of Delivery
Wall Installation
DIN Rail Installation
Electrical voltage! Danger to life!
The system is live.
- Prior to opening always disconnect from the mains and secure all components of the system in such a way that they cannot accidentally be switched on.
- Disconnect external voltages at the relay contacts and secure against unintended activation.
- Check for the absence of voltage!
Diagrams
Electrical terminations
- Solid cable: 0,5-1,5 mm²
- Multiple stranded cables: 1,0-1,5 mm²
Freely configurable
- Zone Bus
- Digital Input 1
- Zone 9-12
- Relay 1 5 A, Class 2
- Relay 2 5 A, Class 2
- Fuse T2A
This document is protected by copyright. All rights based on this are
reserved. No part of this publication may be translated, reproduced or
transmitted in any form or by any similar means, electronic or mechanical,
photocopying, recording or otherwise, or stored in a data retrieval system.
Our verbal and written advice with regard to usage is based on years of
experience and standardized assumptions and is provided to the best of our
knowledge. The intended use of REHAU products is described comprehensively in
the technical product information. The latest version can be viewed at
www.rehau.com/TI. We have no control over the
application, use or processing of the products. Responsibility for these
activities, therefore, remains entirely with the respective user/processor.
Where claims for liability nonetheless arise, they shall be governed
exclusively according to our terms and conditions, available at
www.rehau.com/conditions, insofar as
nothing else has been agreed upon with REHAU in writing. This shall also apply
for all warranty claims, with the warranty applying to the consistent quality
of our products in accordance with our specifications. Subject to technical
changes.
Additional information
© REHAU Industries SE & Co. KG
Rheniumhaus
95111 Rehau
954644 03.2022
REHAU NEA SMART 2.0 Room Thermostat Installation Guide
References
- Conditions of Sale worldwide | REHAU
- NEA SMART 2.0 Manager | REHAU
- REHAU TI Portal - Find specific technical information
- REHAU North America
- Conditions of Sale worldwide | REHAU
- REHAU Group | Engineering progress – Enhancing lives
- NEA SMART 2.0 Manager | REHAU
- REHAU TI Portal - Find specific technical information
- Szállítási és Fizetési Feltételek
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>