PNI CT25WIFI Internet Hub User Manual

PNI CT25WIFI Internet Hub

Technical specifications

• Supply voltage: 5V
• Operating current: 1A
• Connector: micro USB
• RF frequency communication: 868Mhz
• RF transmission power: 13dBm 20mW
• WiFi frequency: 2.4GHz
• WiFi transmission power: 100mW
• Dimensions: Ø 65 x 15mm
• Working temperature: -26°C ~ +80°C
• Water resistance class: IP30

Power the device
Insert the micro USB connector of the included power cord into the dedicated port on the hub. Connect the other end of the cable to the 230V – 5V adapter. Plug the adapter into an outlet.

Hub connection to the WiFi network and addition to the Tuya Smart

application

Note : Make sure your mobile phone is connected to the 2.4GHz WiFi network and that the GPS location is enabled.

1. Connect your phone to the WiFi network.
2. Download the Tuya Smart application.
3. Open Tuya Smart, create an account and log in.
4. Power the hub to a 230V power source.
5. Add the hub to the application by clicking the + icon in the upper right corner of the screen or by clicking the Add device button (this button appears when you have no device added to the application).
6. Select the Gateway Control option on the left side of the screen.
7. From the list of devices displayed on the right side of the screen, select Wireless Gateway.
8. Select the WiFi network you want to connect to and add the password. Click Next.
9. In the next interface, select the EZ Mode option in the upper right corner.
10. Then tick Confirm the indicator is blinking rapidly. Click Next. Note: If the LED on the hub does not flash often, press and hold the button on the hub.
11. The application will start scanning nearby devices.
12. After it identifies your device, you will receive the Added Successfully confirmation.
13. To finish, click the Done button.

Pairing the PNI CT25WIFI hub with the PNI CT25T thermostatic head

1. Click in the application on the recently added gateway, then click on Add subdevice.
2. Then select Heater.
3. Switch off the thermostatic head by pressing the button  . Only the time and day of the week will be displayed on the screen of the thermostatic head.
4. Long press the M key on the thermostatic head. Icons will be displayed on the screen as in the image below:
5. Press the ▲ key on the thermostatic head. A moving signal bar will appear on its screen to suggest that the device is waiting for the pairing signal.
6. Return to the application and click Confirm the indicator is blinking rapidly.
7. The application will search for nearby devices.
8. After identifying your device (the thermostatic head) the message 1 device has been successfully added will appear.
9. Click on Done.
10. The signal indicator will appear on the thermostatic head screen.
11. The message Added successfully will appear in the application. Click on Done again.
    Note : PNI CT25WIFI hub supports pairing a maximum of 16 thermostatic heads.
    

Control of the thermostatic head

1. In the Tuya Smart application, click on the thermostatic head added previously.
2. The temperature of the room where the thermostatic head is installed and the set temperature will be displayed in the main interface. Press + or – to set the desired temperature level.
3. From the application, you can turn the thermostatic head on and off, you can change the operation mode of the thermostat (Manual, ECO, Auto) or you can set the daily program.

Simplified EU Declaration of Conformity

SC ONLINESHOP SRL declares that the PNI CT25WIFI Internet Hub is in accordance with the RED Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following website:
https://www.mypni.eu/products/7681/download/certifications

References

• temp.de

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>