VEVOR PM810KB Cup Heat Press Attachment User Manual
- June 10, 2024
- VEVOR
Table of Contents
P8100 MUG HEAT PRESS
MACHINE
USER MANUAL
PM810KB Cup Heat Press Attachment
Model| PM810KB|
---|---|---
Rating| 310W (120W 50/60Hz)| For US users
280W (220-240″ 50/60Hz)| For European users
Temperature Range| 40-210°C|
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
CustomerService@vevor.com
MUG TRANSFER STEPS
(Reference: temperature 180°C, time 180s)
Note: When unplugging the aviation connector and the countdown cable,
the machine must be powered off.
-
In the power-off state, unplug the aviation connector and the countdown cable on the main machine.
-
1. Plug in the aviation connector and countdown line on the mug printing machine.
2. Power on the machine and set the time and temperature.
-
Stick the printed picture on the mug.
-
Put the mug into the machine and adjust the pressure. When the temperature is reached, press the handle and the machine starts to work.
-
When the countdown is over, take out the mug and tear off the picture attached to the mug, and the transfer of the mug is completed.
HOW TO REPLACE THE HEATING ELEMENT?
(Notice: The edge of the heating element is thin and sharp, please wear
gloveswhen replacing it to avoid cutting your hand.)
- Unscrew the 4 screws on the machine
- Take out the heating element
- The heating element removal is complete !
PREPAREHEA TINGELEMENT FOR REPLACEMENT
- Put in heating element
- Tighten the 4 screws
- The installation is complete
DISPOSAL
This product is subject to the provisions of European Directive 2012/19/EC.
The symbol showing a wheelie bin crossed through indicates that the product
requires separate refuse collection in the European Union. This applies to the
product and all accessories marked with this symbol.
Products marked as such may not be discarded with normal domestic waste, but
must be taken to a collection point for recycling electrical and electronic
devices.
EC REP: EUREP GmbH Unterlettenweg 1a, 85051 Ingolstadt
Germanyeurep@eurep-gmbh.com +49 841
8869 7744
UK REP: Acumen IBC Ltd Ground Floor, 94 Ock Street, Abingdon, OX14 5DH Richard
Kupce
info@ukacumen.com +44 1235 200526
E-mail: CustomerService@vevor.com
Manufacturer: Yiwu Sunmeta Technology Co., Ltd
ADD: NO. 5 Xinpan Road,Shangxi Town,Yiwu City,Zhejiang Province,China
Made in China
E-mail:CustomerService@vevor.com