Newell RGB-W Rangha Nano LED Light Instruction Manual
- June 10, 2024
- Newell
Table of Contents
Newell RGB-W Rangha Nano LED Light
SAFETY INSTRUCTIONS
Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.
- The lamp is a precision device. Do not drop, hit, crush, or expose to any shock.
- The unit is not dustproof or waterproof. Store in a dry, cool, and ventilated place.
- Do not expose to water or other sources of moisture.
- Do not use near-flammable materials and solvents. Do not use the lamp too close to objects. Do not cover the ventilation holes. Do not insert metal parts into the lamp. Do not touch the electrical parts with conductive materials.
- The lamp can operate in a temperature range of 0°C – 40°C.
- The lamp will heat up slightly, but it is normal.
- Do not stare directly at the LED panel that is turned on, it may cause eye damage.
- Do not use the LED outside in direct sunlight for a long time.
- Disconnect the power supply for storage or transportation. Do not lift the camera while holding the lamp handle.
- Allow the unit to cool down before placing it in the package.
- For use by adults.
- If you notice smoke or a strange smell coming from the device, immediately disconnect the power. Do not disassemble. Disassembling the unit will void the warranty. If there are problems with the lamp, bring it to an authorized service center.
Maintenance
Use a dry and soft cloth to clean the unit. Do not clean with water. A little neutral detergent on the cloth to remove stubborn dirt. Do not use strong detergents such as thinner, benzine or alcohol as they may damage the protective coatings.
PRODUCT OVERVIEW
- Cold Shoe Base
- Bi-Color | RGB Mode
- Special Lighting Effect Mode
- Power | Dimmer Wheel
- Battery Compartment
- ¼ Thread
USING
Install the batteries
Open the battery compartment, insert the AA batteries inside as the arrow
indicates. Please make sure the + and – polarity is correct. Remove the
batteries if you don’t use the device for a long time.
Power On & Off
Turn the dimming wheel clockwise or counterclockwise to turn the power on and
off.
Light intensity
Turn the dimming wheel to change the intensity from Oto 100%.
Color temperature control
A long press on the M button switches between Bi-color mode and RGB color
mode. In Bi-color mode, there are 8 degrees of color temperature change
(3000-6500K).
RGB colors
- Long press the M button to switch to RB color mode.
- In RB color mode, briefly press the M button to change 12 different colors.
Lighting special effects
Hold down the F button for 3 seconds to enter the special effects mode. In
this mode, briefly press the F button to change 13 different effects.
- F1: Paparazzi
- F2: Fireworks
- F3: Broken light bulb
- F4: Lightning
- F5: TV
- F6: Flicker
- F7: RGB loop
- F8: Police car
- F9: Ambulance
- F10: Fire truck
- F11: Party
- F12: Bonfire
- F13: SOS
SPECIFICATION
| Output Power | 3W |
|---|---|
| Brightness | 300 LM |
| CRI | 90+ |
| LED Quantity | White Color x 16 pcs. Warm Color x 16 pcs. |
RGB x 16 pcs.
Color Temperature| 3000-6500 K
RGB Colors| 12
Dimming Range| 0-100%
AA Battery Type| AA x 2 pcs.
Voltage| 3V
Product Dimensions| 68 x 80 x 35 mm
The manufacturer reserves the right to change the information contained in this manual without prior notice.
WASTE MANAGEMENT
The crossed-out trashcan symbol means that waste electrical and electronic, batteries, and packaging must not be placed with other household waste. They must be handed over to a separate waste collection system.
WARRANTY
Newell products are covered by a 40-month manufacturer’s warranty.
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>