nedis BTLS20RGBW 2 Meter Smart Bluetooth USB LED Strip User Guide

: June 10, 2024
: nedis

Table of Contents

nedis BTLS20RGBW 2 Meter Smart Bluetooth USB LED Strip
Product Information
Product Usage Instructions:
Intended use
Specifications
Main parts
Safety instructions
Installing the app
Connecting the product
Setting up the product
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nedis BTLS20RGBW 2 Meter Smart Bluetooth USB LED Strip

nedis-BTLS20RGBW-2-Meter-Smart-Bluetooth-USB-LED-Strip-
PRODUCT

Product Information

The Smart Bluetooth USB LED Strip, model BTLS20RGBW, is a product that can be controlled through a smartphone. It is intended for indoor use only and not for professional use. Any modification of the product may affect its safety, warranty, and proper functioning.

Specifications:

Article number: BTLS20RGBW
LED strip length: 2m
LED strip width: 12mm
Brightness: 380lm
Light colour: RGB + 2700K
LED type: 5050 + 2835
LED quantity: 2 x 30 per meter
Connection: 5 pins at 2mm each
Power: 4W
Waterproof: IP20
Energy class: F

Main Parts:

USB cable
LED strip
LED strip connector

Safety Instructions:

WARNING : Replace a damaged or defective product immediately.

Product Usage Instructions:

Installing the App:

Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
Open the Nedis Smartlife app on your phone.
Create an account with your mobile phone number or your e-mail address and tap Continue.
Enter the received verification code.
Create a password and tap Done.
Tap Add Home to create a SmartLife Home.
Set your location, choose the rooms you want to connect with, and tap Done.

Connecting the Product:

Align the arrow on the LED strip connector A3 to the +5V sign on the LED strip A2.
Plug A3 into A2.
Plug the USB cable A1 into a power source. A2 blinks.
If A2 does not blink, disconnect and reconnect A1 from the power source three times until A2 starts to blink.
Enable Bluetooth on the device you want to pair.
Tap + in the top right corner.
Under Search Device, select the product from the list of available devices.
Rename the product after it has been found and added.

Setting up the Product:

Unplug A1 from the power source.
Clean the surface from dust and grease. The surface must be smooth. Do not place the product on knitted/wool fabrics, dust wall, rough plastic surface, or frosted glass.
Remove part of the 3M tape from the back of A2.
Place the start of A2 in the desired position. Make sure the power source is within reach.
Unroll A2.
Remove the 3M tape and press A2 into the desired position.
Firmly press A2 down with your hand. Do not use hard objects to press A2 down to prevent damage. Only fold/bend A2 around the cut lines to prevent damage to the components.
If desired, cut A2 to size on the indicated cut lines.

For more information see the extended manual online: ned.is/btls20rgbw

Intended use

This product is a Smart Bluetooth USB LED strip that can be controlled by smartphone.
The product is not intended for professional use.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product	Smart Bluetooth USB LED Strip
Article number	BTLS20RGBW
LED strip length	2 m
LED strip width	12 mm
Brightness	380 lm
Light colour	RGB + 2700K
LED type	5050 + 2835
LED quantity	2 x 30 per meter
Connection	5 pins at 2 mm each
Power	4 W
Waterproof	IP20
Energy class	F

Main parts

$nedis-BTLS20RGBW-2-Meter-Smart-Bluetooth-USB-LED-Strip-FIG- $2$$

USB cable
LED strip
LED strip connector

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Only use the provided power cable.
Do not expose the product to water or moisture.

Installing the app

Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
Open the Nedis Smartlife app on your phone.
Create an account with your mobile phone number or your e-mail address and tap Continue.
Enter the received verification code.
Create a password and tap Done.
Tap Add Home to create a SmartLife Home.
Set your location, choose the rooms you want to connect with and tap Done

Connecting the product

Align the arrow on the LED strip connector A3 to the +5V sign on the LED strip A2.
Plug A3 into A2.
Plug the USB cable A1 into a power source. A2 blinks.
If A2 does not blink, disconnect and reconnect A1 from the power source three times until A2 starts to blink.
Enable Bluetooth on the device you want to pair.
Tap + in the top right corner.
Under Search Device, select the product from the list of available devices.
Rename the product after it has been found and added.

Setting up the product

Unplug A1 from the power source.
Clean the surface from dust and grease.
The surface must be smooth. Do not place the product on knitted/wool fabrics, dust wall, rough plastic surface or frosted glass.
Remove part of the 3M tape from the back of A2.
Place the start of A2 in the desired position.
Make sure the power source is within reach.
Unroll A2.
Remove the 3M tape and press A2 into the desired position.
Firmly press A2 down with your hand.
Do not use hard objects to press A2 down to prevent damage.
Only fold/bend A2 around the cut lines to prevent damage to the components
If desired, cut A2 to size on the indicated cut lines.
Plug A1 into a power source.

Controlling the product

Use the app to change modes, speed, LED colour, and LED brightness.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product BTLS20RGBW from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully.
This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/btls20rgbw#support

For additional information regarding the compliance, contact the customer service:

Web : www.nedis.com
E-mail : service@nedis.com
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch The Netherlands
ned.is/btls20rgbw