nedis WIFILX01C42 WiFi Smart Full Colour String of Lights with 8 Patterns and Full Colour User Guide

: June 10, 2024
: nedis

Table of Contents

Wi-Fi Smart Full Colour String of Lights
- With 8 patterns and full Colour
WIFILX01C42 | WIFILX01C84 | WIFILX01C168
Quick start guide
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wi-Fi Smart Full Colour String of Lights

With 8 patterns and full Colour

WIFILX01C42 | WIFILX01C84 | WIFILX01C168

nedis WIFILX01C42 WiFi Smart Full Colour String A1

A

Quick start guide

For more information see the extended manual online:
ned.is/wifilx01c42 | ned.is/wifilx01c84 | ned.is/wifilx01c168

Intended use

This product is a smart full colour string of lights intended for lighting indoor and outdoor environments, that can be controlled using the Nedis SmartLife App.
Keep the warranty card, purchase receipt and user manual together in the original packaging for future reference.
This product is intended for indoor and outdoor use.
Do not let persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge of how to operate, use the product.
Children should be supervised to ensure that they do not play with the product.
This product is not intended to be operated by means of an external timer or a separate remote control system.

Main parts (image A)

Adapter
Light string
Microphone
Male light string connector
Reset button

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
The surfaces of the product get hot during use.
Keep the product and power cable out of reach of children under 8 years of age.
Only use the provided power cable.
This lighting chain must only be used with the provided transformer.
Never connect this lighting chain electrically to other lighting chains.
Do not connect the lighting chain to the supply while the lighting chain is inside the packaging.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
The lamps are not replaceable.
This lighting chain must not be used without all gaskets being in place.

Installing the Nedis SmartLife app

Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
Open the Nedis Smartlife app on your phone.
Create an account with your mobile phone number or your e-mail address and tap Continue.
Enter the received verification code.
Create a password and tap Done.
Tap Add Home to create a SmartLife Home.
Set your location, choose the rooms you want to connect with and tap Done.

Installing the product

Plug the male light string connector A4 into the adapter A1.
Plug the adapter A1 into a power outlet.
The light string A2 starts flashing quickly.
Press and hold the reset button A5 for 5 seconds to reset the product if the light string A2 does not flash quickly.
Tap + in the Nedis SmartLife app.
Select the product from the list of available products.
Tap to confirm.
Enter the password of the 2,4 GHz Wi-Fi network to which your phone is connected and tap Confirm.
Rename the product after it has been found and added.

If the above connection method fails, the product can be connected using AP mode:

Press and hold the reset button A5 for 5 seconds.
The light string A2 flashes quickly.
Press and hold the reset button A5 again for 5 seconds.
The light string A2 flashes slowly.
Tap + in the Nedis SmartLife app.
Select the product from the list of available products.
Tap AP Mode in the top right corner.
Follow steps 4 till 8 of the regular connection method.

Using the product

Press the reset button A5 to cycle through the different lighting modes.

Alternatively, the product can be controlled with the Nedis Smartlife app.

Press and hold the reset button A5 for 5 seconds to enter pairing mode.
The product can be controlled with the Nedis SmartLife app via a Wi-Fi connection from any location.
The home menu of the Nedis SmartLife app shows a control tile for each connected lamp and/or group.
The product can be connected to Google Home or Amazon Alexa to enable speech control.
See our support webpage to discover all possibilities of this Nedis® product.
Choose the desired light mode in the Nedis SmartLife app.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product WIFILX01C42 | WIFILX01C84 | WIFILX01C168 from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:
nedis.com/WIFILX01C42#support
nedis.com/WIFILX01C84#support
nedis.com/WIFILX01C168#support

ned.is/wifilx01c42

ned.is/wifilx01c84

ned.is/wifilx01c168

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands

07/22