Newell RL-10A LED Ring Light Arctic White User Manual
- October 30, 2023
- Newell
Table of Contents
Newell RL-10A LED Ring Light Arctic White User Manual
SAFETY INSTRUCTIONS
Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.
- The lamp is a precision device. Do not drop, hit, crush or expose to any shock.
- The unit is not dustproof or waterproof Store in a dry, cool and ventilated place. Do not expose to water or other sources of moisture.
- Do not use near flammable materials and solvents.
- Do not use the lamp too close to objects. Do not cover the ventilation holes. Do not insert metal parts into the lamp. Do not touch the electrical parts with conductive materials.
- The lamp can operate in a temperature range of 0°C – 40°C.
- The lamp will heat up slightly, but it is normal.
- Do not stare directly at the LED panel that is turned on, it may cause eye damage.
- Do not use the LED outside in direct sunlight for a long time.
- Disconnect the power supply for storage or transportation.
- Allow the unit to cool down before placing it in the package.
- For use by adults.
- If you notice smoke or a strange smell coming from the device, immediately disconnect the power. Do not disassemble. Disassembling the unit will void the warranty. If there are problems with the lamp, bring it to an authorized service center.
Maintenance
Use a dry and soft cloth to clean the unit. Do not clean with water. A little
neutral detergent on the cloth to remove stubborn dirt. Do not use strong
detergents such as thinner, benzine or alcohol as they may damage the
protective coatings.
CONSTRUCTION
- Light panel
- Angle adjustment knob
- Hot-shoe fixed knob
- Power switch
- Type-C input port
- Micro USB input port
- Hot-shoe slot
- Brightness adjustment knob
- Color temperature adjusting knob
USAGE
-
Switch On /Off
Connect the 5V 2A adapter to the product’s Type-C or Micro-USB input port. Power up the adapter. Turn the power switch to the “ON”. Power indicator light will be on. The product is ready to use. Turn the power switch to the “OFF”, the power indicator is off, and the product is shut down. -
Adjustment modes
Color temperature adjustment
When the product is on, turn the dial to change the color temperature range. Turn the dial clockwise to decrease the color temperature (cold hue). If you turn the dial counterclockwise, the color temperature will increase (warm hue).
Brightness adjustment
When the product is on, turn the brightness control knob clockwise and the brightness of the light will increase. The maximum brightness will be reached when the knob is turned to the end point. Turn the brightness control knob counterclockwise, the brightness will decrease.
PRODUCT SIZE
SPECIFICATION
| LED beads | 5600k – 56 pcs 3200k -56 pcs |
|---|---|
| Power | 8w |
| Power adapter | 5v,2A |
| Maximum illumination | 400 Lux (0,5 M) ,12 Lux (1m) |
| Color temperature index | 3200-5600k |
| Working environment temperature | CRI > 95 |
| Storage temperature | 0-35 |
| Relative humidity | -10-50 |
| Net weight | 20-80 % |
| Product size | 237 g |
| Net weight | 254 x 15 x 312 mm |
KIT CONTENTS
| NAME | QUANTITY |
|---|---|
| Newell RL-10A LED lamp | 1 PC |
| tripod | 1 PC |
| USB-C power adapter (5V) | 1 PC |
| smartphone holder | 1 PC |
| head with cold shoe | 1 PC |
The manufacturer reserves the right to change the information contained in this manual without prior notice.
WASTE MANAGEMENT
The crossed-out trashcan symbol means that waste electrical and electronic, batteries and packaging’s must not be placed with other household waste. They must be handed over to a separate waste collection system.
WARRANTY
Newell products are covered by a 40-month manufacturer’s warranty.
Made in China, In China
