Newell Sparkle LED Light Kit Instruction Manual

Newell Sparkle LED Light Kit

SAFETY INSTRUCTIONS

Please read the following instructions carefully before using the product, and keep this manual for future reference. When giving the product to a third party, it is advisable to enclose the manual with the product.

1. The lamp is a precision device. Do not drop, hit or shock the unit.
2. The unit is not dustproof or waterproof. Store in a dry, cool and ventilated place. Do not expose the unit to moisture or rain.
3. Do not use the unit near flammable agents or solvents.
4. Do not use the lamp too close to objects. Do not cover the ventilation holes. Do not insert metal parts into the unit. Do not touch the electrical parts with conduc­tive materials.
5. The operating temperature range is 0-40 degrees.
6. It is normal that the unit will be a little hot during operation.
7. Do not stare directly at the LED panel that is turned on, it may lead to eye damage.
8. Do not use the LED lamp outside in direct sunlight for a long time.
9. Do not turn on the unit in the package. Allow the unit to cool down before putting it in the package.
10. Keep out of reach of children.
11. If you notice smoke or a strange smell coming from the unit, disconnect the power immediately. Do not disassemble the unit yourself. Disassembling the unit will void the warranty. If there are problems with the unit, bring it to an authorized service center.

Maintenance

Use a dry and soft cloth to clean the unit. Do not clean with water. A little neutral detergent on the cloth to remove stubborn dirt. Do not use strong detergents such as thinner, benzine or alcohol as they may damage the protective coatings.

PRODUCT OVERVIEW

1. A LCD screen
2. B Regulator E
3. C Power socket F B
4. D Angle Locking Lever C
5. E Battery compartment
6. F Mains Power Switch

USAGE

Use the supplied power cord or mount NP-F970/770 battery (Not include) on battery compartment. Long press Main Power Switch to turn on the LED light. Short press Regulator button, rotate Regulator to adjust brightness from 10%-100%. Short press Regulator button again, rotating the regulator to adjust the color temperature from 3200K-5600K.

SPECIFICATIONS

‘The manufacturer reserves the right to change the information contained in this manual without prior notice.

SET CONTENTS

1. Softbox x2
2. Rod x8
3. LED light x2
4. Diffuser x2
5. Power adapter x2
6. Light stand x2

INSTALLATION STEPS

1. Step 1 : Insert the plastic head of the metal support Rod into the top corner of the softbox
2. Step 2 : Insert the metal head of the metal support Rod into the lamp holder hole.
3. Step 3 : After installing the 4 metal support rods, Attach Velcro flaps on the rear end of the
4. Step 4 : Attach diffuser on the softbox
5. Step 5 : Finished

WASTE MANAGEMENT

The crossed-out trashcan symbol means that waste electrical and electronic equipment, batteries and packagings must not be placed with other household waste. They must be handed over to a separate waste collection system.

WARRANTY

Newell products are covered by a 40-month manufacturer’s warranty

Made in China, In China hergestellt, Hecho en China, Fabbricato in Cina, Fabrique en Chine, Vyrobeno v Cfne, Wyprodukowano w Chinach, CAenaHo s Ktnae

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>