Newell Air Artha XL LED Light Instruction Manual

Newell Air Artha XL LED Light

SAFETY INSTRUCTIONS

Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.

1. The lamp is a precision device. Do not drop, hit, crush, or expose to any shock.

2. The unit is not dustproof or waterproof. Store in a dry, cool, and ventilated place.
   Do not expose to water or other sources of moisture.

3. Do not use near-flammable materials and solvents.

4. Do not use the lamp too close to objects. Do not cover the ventilation holes.
   Do not insert metal parts into the lamp. Do not touch the electrical parts with conductive materials.

5. The lamp can operate in a temperature range of 0’C – 40’C.

6. The lamp will heat up slightly, but it is normal.

7. Do not stare directly at the LED panel that is turned on, it may cause eye damage.

8. Do not use the LED outside in direct sunlight for a long time.

9. Disconnect the power supply for storage or transportation.

10. Allow the unit to cool down before placing it in the package.

11. For use by adults.

12. If you notice smoke or a strange smell coming from the device, immediately disconnect the power. Do not disassemble. Disassembling the unit will void the warranty. If there are problems with the lamp, bring it to an authorized service center.

Maintenance

Use a dry and soft cloth to clean the unit. Do not clean with water. A little neutral detergent on the cloth to remove stubborn dirt. Do not use strong detergents such as thinner, benzine or alcohol as they may damage the protective coatings.

PRODUCT DESCRIPTION

Characteristic

Artha XL is an LED lamp designed in a slim version and gives soft light. The aluminum housing provides cooling for the device. Built with 180pcs of 3200K and 180pcs of 5600K LEDs. To adapt the light to the environment, the brightness can be adjusted from 0 – 100%, and the color temperature from 3200K to 5600K. Thanks to the built-in bracket, it is possible to position the panel in any 360′ range, allowing the light to be perfectly adjusted. The use of a high-efficiency voltage-reducing converter and the efficiency scale of the current DC, makes each diode use the maximum potential. With the help of the LCD display, we can easily read the current brightness, color temperature, and state of battery charge. The lamp is powered by a single V-mount battery pack (sold separately) or a power adapter (included).

Construction

1. Light plate
2. Angle adjustment knob
3. Fixed knob
4. Fixed seat
5. Battery compartments
6. Remove the button battery
7. Power switch
8. DC plug
9. Brightness color temperature adjustment knob
10. Color temperature control button
11. Brightness control button
12. LCD display

INSTALLATION AND USAGE

1. Loosen the mounting knob (figure 1).
2. Place the end of the tripod in the socket of the holder (figure 2).
3. Tighten the fixing knob clockwise (figure 3).

Angle adjustment

1. Loosen the mounting knobs on both sides of the panel.
2. Adjust the desired tilt angle.
3. Tighten the fixing knobs.

Power Supply

1. Battery power supply
   Place the V-mount battery in the slot until it locks into place. Turn on the device with the button on the left side shifting the to the “I” position. Moving the power switch to the “0” position, turn off the device completely.

2. Power supply
   Insert the plug into the socket of the DC power supply. From this point on, the device uses exclusively the AC adapter. Set the power switch to the “II” position. Moving the power switch to the “0” position turns the device off completely.

3. To turn it off
   On, press the power switch turn to “O” to turn it off.

Function

1. Display
   Once the device is up and running the display will show brightness, color temperature, and battery charge status.

2. Brightness control
   After starting up, press the “brightness adjustment button”. On the display, the brightness value will flash once. By turning the adjustment knob, change the brightness to the desired.

3. Color temperature adjustment
   After starting up, press the “color temperature adjustment button”. On the display, the color temperature value will flash once. By turning the knob adjustment, change the color temperature to the desired temperature.

PRODUCT SIZE

Units: mm Tolerances: ± 1.0mm L = 535 W = 32 H = 550

SPECIFICATION

wireless remote control
Control mode| Three-stage adjustment
Dimming range| 0-100%
Power supply mode| – V-mount battery

– DC power supply

We recommend using Newell rechargeable batteries.

Connectors| DC plug
Net weight| About 3320g
Operating environment temperature| 0° N40 ° C
Storage temperature| -10° N 50°c
Relative humidity| 20% – 90%
Product size| 539 mm x 38 mm x 548 mm

The manufacturer reserves the right to change the information contained in this manual without prior notice.

WASTE MANAGEMENT
The crossed-out trashcan symbol means that waste electrical and electronic, batteries, and packaging must not be placed with other household waste. They must be handed over to a separate waste collection system.

WARRANTY

Newell products are covered by a 40-month manufacturer’s warranty.

Made in China, In China hergestellt, Hecho en China, Fabbricato in Cina, Fabrique en Chine, Vyrobeno v Cine, Wyprodukowano w Chinach,

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>