VEVOR HE-15C-24M-US Honey Extractor User Manual
- June 10, 2024
- VEVOR
Table of Contents
Support and E-Warranty Certificate
https://www.vevor.com/support
Manual Honey Extractor
2-4/3/4-8frames
USER MANUAL
HE-15C-24M-US Honey Extractor
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: CustomerService@vevor.com.
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
SAFETY INSTRUCTIONS
For your safety and the safety of others, the following precautions must be observed when operating the honey extractor:
- Make sure the honey extractor is clean before use;
- The speed of the honey extractor must not be too high or too low.
Adjust the speed according to the amount of nectar or usage habits;
Connect to the grounding pile to fix the honey extractor;
WARNING:
Do not disassemble or change this machine.
MODEL AND PARAMETRS
Model| HE-15C-24M-US
HE-15C-3M-US
HE-18C-48M-EU
---|---
Capacity| 15±1kg/18±1kg
Height from the bottom of the barrel to the ground| 32-40cm(lifting)
Frames| 2-4/3/4-8 frames
Fit frame size| Large frame: L415mm
W200mm Small frame: L415mm W135mm
Main materials| 201 stainless steel
STRUCTURE DIAGAM
| No | Parts name |
|---|---|
| 1 | Lid |
| 2 | Handle |
| 3 | Barrel Body |
| 4 | Support Leg |
| 5 | Honey Valve |
ASSEMBLY AND USE
Step 1: Installation of Support Legs.
First, take out the three legs and place the barrel on the ground. Next, align the holes on the three legs with the corresponding three holes on the barrel, insert screws into the holes, and tighten them with a screwdriver.
Step 2: Installation of the Honey Valve.
First, erect the barrel and unscrew the honey outlet connector. Then, put the
honey outlet at the corresponding outlet outside the barrel. Finally, put the
plastic nut into the barrel, connect it with the honey outlet connector, and
tighten it.
Step 3: Installation of Honey Extractor Lid.
Assemble the two lids with screws.
Step 4: Put the beehive frames of different sizes with honey into the
corresponding frames in the barrel.
Step 5 : Cover the two lids separately at the mouth of the barrel.
Step 6: Rotating honey extractor.
Hold the handle with your hand and shake it in the same direction to rotate
the inner frame.
Step 7: Take out the honey.
First, loosen the screw. Then hold the handle of the honey outlet connector, lift it to open the honey outlet, and let the honey flow out.
TROUBLESHOOTING INSTRUCTION
| Problem | Reason | Solutions |
|---|---|---|
| Shake hands loose | The screws are loose | Tighten the screws with a screwdriver |
| Barrel shaking | The frames are not placed symmetrically | Place the frames |
symmetrically
The feet are not fixed on the ground| Fix the feet on the ground
CLEAN,CARE AND STORAGE RULES
Care and cleaning :
The honey extractor shall be thoroughly cleaned and dried before use.
Especially the one that has not been used for a long time, shall be
disassembled and cleaned. Otherwise, the honey stains and other impurities
left in the honey shaker will pollute the honey.
After using the honey extractor, clean the inner and outer walls of the barrel
and its stainless steel frame. And dry them with a clean and dry cloth, use a
hair dryer, or let them air dry to keep them clean to prepare for the next
use.
Storage :
Please store it out of the reach of children;
After using the honey extractor, place it in a cool place and cover it with a
large cloth to prevent dust from entering.
Manufacturer: Change Xiao Bee Industry Co. Ltd
Add: He Shang Yang Village, Da Zhou Town, Change City,
Xicheng City, Henan Province
Made in China
Support and E-Warranty Certificate
https://www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>