ALPHACOOL Eiswolf 2 AIO – 360mm RTX 4090 Aorus Master Instruction Manual
- June 10, 2024
- ALPHACOOL
Table of Contents
- ALPHACOOL Eiswolf 2 AIO – 360mm RTX 4090 Aorus Master
- Product Information: Alphacool Eiswolf 2
- Mounting the Cooler
- Mounting the Radiator and Fans
- Wiring of the Fans
- Connection of the Pump
- Application Note for Quick Connectors
- Accessories
- Mounting of the cooler
- Mount radiator and fans
- Connection of the pump
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ALPHACOOL Eiswolf 2 AIO – 360mm RTX 4090 Aorus Master
Product Information: Alphacool Eiswolf 2
The Alphacool Eiswolf 2 is a GPU AiO (All-in-One) cooler designed for Aurora graphics cards. It comes with a mounting set for the G
PU cooler, three 120mm fans, M3x6mm and 3x30mm screws, a PWM cable Y-adapter, and an ARGB adapter. The cooler features digital-RGB LED lighting that requires a supply voltage of less than 5V. The pump can be connected to a 12V power source in the BIOS but it is not necessary for PWM connections. The cooler also includes quick connectors that can be installed using the provided application notes.
Product Usage Instructions
Mounting the Cooler
To mount the cooler, use the mounting kit (B) as described in the Aurora graphics card cooler instructions manual.
Mounting the Radiator and Fans
Mount the fans on the radiator pushing or pulling as per your preference.
Wiring of the Fans
Follow the wiring instructions to connect the fans to mainboard using the PWM cable Y-adapter and ARGB adapter provided.
Connection of the Pump
The pump can be connected to a 12V power source in the BIOS but it is not necessary for PWM connections.
Application Note for Quick Connectors
Follow the application notes provided to install the quick connectors.
If you need assistance with the product, please contact Alphacool
International GmbH at Marienberger Str. 1, D-38122 Braunschweig, Germany. You
can reach their support team at +49 (0)
531 28874-0 or via email at info@alphacool.com. You can also visit their
website at https://www.alphacool.com for more information.
Accessories
Mounting of the cooler
Mount the cooler using the mounting kit (B) as described in the manual of the Aurora graphics card cooler instructions.
Mount radiator and fans
Mount fans pushing.
Mount fans pulling.
Wiring of the fans
Connection to the mainboard
Three possibilities for the connection of the digital-RGB LED lighting
The digital RGB LEDs do not require more than 5V supply voltage. Eiscontrol is not included in the accessories.
Connection of the pump
Make sure that the voltage is set to 12V in the bios. This is not necessary for PWM connections.
Application note for quick connectors
One or two drops of coolant may leak out.
Example installation of the quick connectors
Need help?
- Alphacool International GmbH Marienberger Str. 1
- D-38122 Braunschweig Germany
Support: +49 (0) 531 28874-0
Fax: +49 (0) 531 28874 – 22
E-Mail: info@alphacool.com
https://www.alphacool.com