neptronic CMMB100 Dual Mini Input Communication Module Instruction Manual

: July 20, 2024
: neptronic

Table of Contents

neptronic CMMB100 Dual Mini Input Communication Module
Product Usage Instructions
Description
Technical Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

neptronic CMMB100 Dual Mini Input Communication Module

Specifications:

Model: CMMB100
Input Voltage : Universal
Communication: BACnet, Modbus
Operational Temperature: TBD
Storage Temperature: TBD
Relative Humidity : TBD
Weight: TBD
Dimensions:
- A = 3.18 / 81 mm
- B = 4.93 / 125 mm
- C = 2.27 / 58 mm

Product Usage Instructions

Connections and Configurations:

Please note that all jumper settings must also be set to the same value through BACnet. Some additional configurations are only available through BACnet.

Network Settings:

Mode :
- If BACnet :
- Auto Detect (default)
- Manual settings available through DS2-1 & DS2-2
- If Modbus :
- Config via Modbus Register
- No parity, 2 stop bits
Baud Rate:
- 9600, 19200, 38400, or 76800 (BACnet) / 57600 (Modbus)
MAC Address: Set using the 8 DIP switches representing a binary logic.

Network Port and Inputs:

End of Line: Default is None, with an option for 120 ohms.
Network Port :
- A+: BACnet/Modbus A+
- B-: BACnet/Modbus B-
- BCOM: Common
Voltage Input : Max 175mA, supports both 24 Vac or Vdc.

LED Indicators:

Power On/Off
Status Flashing : Normal operation
RX/TX Flashing: Indicates receiving/transmitting data for BACnet or Modbus
Input Status : Indicates input status – On/Off/Flashing based on connection

FAQ

How do I configure the MAC address on the CMMB100?
- The MAC address can be configured using the 8 DIP switches on DS1. The default setting is all OFF, but you can set binary logic to calculate the MAC address.
What are the default settings for Baud Rate and Mode options?
- The default setting for Baud Rate is based on the communication protocol: 76800 for BACnet and 57600 for Modbus. The default mode is Auto Detect for BACnet and Config via Modbus Register for Modbus.

Description

The CMMB extends your BACnet or Modbus network when your application requires additional inputs on a physical controller. Combining the 8 inputs of the CMMB with your Building Automation System provides simple expansion of a new or existing controller andreduces unnecessary costs of additional components.

Features

Power & Communication

24Vac or 24Vdc supply
BACnet® MS/TP or Modbus communication port (selectable)

Inputs

8 universal inputs

Installation

LED status indication of each input
DIN rail mounting
Removable, non-strip, raising clamp terminals
Removable see-through panel for easy access to DIP switches

Network Communication

BACnet® MS/TP or Modbus communication port (selectable via DIP switch)
Select the MAC address via the DIP switch or via the network

BACnet®

MS/TP @ 9600, 19200, 38400 or 76800 bps
Automatic baud rate detection
Automatic device instance configuration
Copy & broadcast configuration to other CMMB modules

Modbus

Modbus @ 9600, 19200, 38400 or 57600 bps
RTU Slave, 8 bits (configurable parity and stop bits)
Connects to any Modbus master

Technical Specifications

Specifications	CMMB100
Input Voltage	24 Vac or 24 Vdc
Consumption	3VA (175mA @ 24 Vac)
Universal Inputs	8 [0.00-10.00Vdc, 10KΩ/20KΩ/30KΩ, on/off (dry contact),

4.00-20.00mA] / 12b hardware resolution with oversampling
BACnet| BACnet® MS/TP @ 9600, 19200, 38400 or 76800 bps (BAS-C)
**** Modbus| Modbus RTU slave @ 9600, 19200, 38400 or 57600. Selectable parity and stop bit configuration:

· No parity, 2 stop bit

· Even parity, 1 stop bit

· Odd parity, 1 stop bit

Communication Connections| 24 AWG twisted-shield cable (Belden 9841 or equivalent)
Electrical Connections| 0.8 mm2 [18 AWG] minimum
Operational Temperature| 0ºC to 50ºC [32ºF to 122ºF]
Storage Temperature| -30ºC to 50ºC [-22ºF to 122ºF]
Relative Humidity| 5 a 95% non condensed
Weight| 0.2 kg [0.4 lb]
Dimensions

**** A = 3.18” / 81 mm

B = 4.93” / 125 mm

C = 2.27” / 58 mm

| ****

Connections and Configurations

Please note that all jumper settings must also be set to the same value through BACnet. Some additional configurations are only available through BACnet (see Network Conditions

LEDs

Power

On = Input voltage normal
Off = No power

Status

Flashing = Normal operation (watchdog)

RX/TX (BACnet)

Flashing = Receiving (RX) and/or transmitting (TX) data.

RX/TX (Modbus)

Flashing = Receiving (RX) and/or transmitting (TX) data.

Input Status

On = Input on
Off = Input off

Flashing = Input not connected (thermistor setting only)
Analog = When Universal Inputs are set to analog values (Vdc, mA, or Thermistor); the LED intensity corresponds to the input value.

For example: At 10Vdc, the LED will be fully on. At 5Vdc, the LED will be at 50% intensity. At 0 Vdc, the LED will be off.

MAC Address DIP Switch (DS1)
MAC addresses for BACnet and Modbus communication, are selectable by DIP switch DS1 using binary logic.

BACnet

The highest MAC address is 254.
Default is all switches OFF = MAC address 0
If you do not change the device instance in program mode, it will be automatically modified according to the MAC address.

MAC Address| DS.1 = 1| DS.2 = 2| DS.3 = 4| DS.4 = 8| DS.5 = 16| DS.6 = 32| DS.7 = 64| DS.8 = 128| Default Device Instance
---|---|---|---|---|---|---|---|---|---
0| OFF| OFF| OFF| OFF| OFF| OFF| OFF| OFF| 153000
1| ON| OFF| OFF| OFF| OFF| OFF| OFF| OFF| 153001
2| OFF| ON| OFF| OFF| OFF| OFF| OFF| OFF| 153002
3| ON| ON| OFF| OFF| OFF| OFF| OFF| OFF| 153003
4| OFF| OFF| ON| OFF| OFF| OFF| OFF| OFF| 153004
…| …| …| …| …| …| …| …| …| …
126| OFF| ON| ON| ON| ON| ON| ON| OFF| 153126
…| …| …| …| …| …| …| …| …| …
254| OFF| ON| ON| ON| ON| ON| ON| ON| 153254

Modbus

Highest MAC address is 247.
Default is all switches OFF = MAC address 1
MAC address is binary value +1
There is no device instance for Modbus.

MAC Address| DS.1 = 1| DS.2 = 2| DS.3 = 4| DS.4 = 8| DS.5 = 16| DS.6 = 32| DS.7 = 64| DS.8 = 128
---|---|---|---|---|---|---|---|---
0+1 = 1| OFF| OFF| OFF| OFF| OFF| OFF| OFF| OFF
1+1 = 2| ON| OFF| OFF| OFF| OFF| OFF| OFF| OFF
2+1 = 3| OFF| ON| OFF| OFF| OFF| OFF| OFF| OFF
3+1 = 4| ON| ON| OFF| OFF| OFF| OFF| OFF| OFF
4+1 = 5| OFF| OFF| ON| OFF| OFF| OFF| OFF| OFF
…| …| …| …| …| …| …| …| …
126+1 = 127| OFF| ON| ON| ON| ON| ON| ON| OFF
…| …| …| …| …| …| …| …| …
246+1 = 247| OFF| ON| ON| OFF| ON| ON| ON| ON

Network Conditions

Please note that all jumper settings must also be set to the same value through BACnet or Modbus. The following is a list of conditions and additional BACnet or Modbus objects.

Universal Inputs (AI1-AI8)

For temperature thermistor reading: with the jumper set to Thermistor, set the AI input type to 10K_TypeG, 10K_Type3A1, 10K_Type4A1, 10K_NTC, 20K_Type6A1 or 30K_Type6A1.
For on/off contact input reading: with the hardware jumper set to Thermistor, set the AI input type to Digital_Input. The polarity can also be set to direct or reverse. For example, in Reverse an “on” signal would be recognized as an “off” signal.
For analog 0-10 Vdc input reading: with the hardware jumper set to 0-10 Vdc, set the AI input type to 0_10V.

Pulse Counting Feature

The pulse counting feature enables counting the number of pulses detected by the inputs.

When an active edge is detected, the Pulse Count is incremented by 1 up to the Prescaler value. When the Prescaler value is reached, the Accumulator is incremented by 1 and the Pulse Count is reset to 0.
A value that is higher than 80% of the input’s saturation confirms a high level. A value that is lower than 20% of the input’s saturation confirms a low level.
The maximum frequency is 100Hz and the minimum pulse length is 5ms/50%D.C

BACnet Objects Table

ID 1

| ****

Name

| ****

Description

| ****

Writable?

| *Notes ( = default)**

( † = only when UniversalInputxFunction is set to _10KType3/G )

---|---|---|---|---

AI.1

| ****

UniversalInput1

| ****

Universal input 1

mode selected by MSV.1

| ****

Out of service

| 0 to 10Volt or -40 to 100ºC (150ºC) † or

-40 to 212ºF (302ºF) † or 4 to 20mA or 0 to 1 Resolution: 0.01Volt or 0.01ºC/0.02ºF or 0.01mA or 1

AI.2

| ****

UniversalInput2

| ****

Universal input 2

mode selected by MSV.12

| ****

Out of service

| 0 to 10Volt or -40 to 100ºC (150ºC) † or

-40 to 212ºF (302ºF) † or 4 to 20mA or 0 to 1 Resolution: 0.01Volt or 0.01ºC/0.02ºF or 0.01mA or 1

AI.3

| ****

UniversalInput3

| ****

Universal input 3

mode selected by MSV.15

| ****

Out of service

| 0 to 10Volt or -40 to 100ºC (150ºC) † or

-40 to 212ºF (302ºF) † or 4 to 20mA or 0 to 1 Resolution: 0.01Volt or 0.01ºC/0.02ºF or 0.01mA or 1

AI.4

| ****

UniversalInput4

| ****

Universal input 4

mode selected by MSV.48

| ****

Out of service

| 0 to 10Volt or -40 to 100ºC (150ºC) † or

-40 to 212ºF (302ºF) † or 4 to 20mA or 0 to 1 Resolution: 0.01Volt or 0.01ºC/0.02ºF or 0.01mA or 1

AI.5

| ****

UniversalInput5

| ****

Universal input 5

mode selected by MSV.57

| ****

Out of service

| 0 to 10Volt or -40 to 100ºC (150ºC) † or

-40 to 212ºF (302ºF) † or 4 to 20mA or 0 to 1 Resolution: 0.01Volt or 0.01ºC/0.02ºF or 0.01mA or 1

AI.6

| ****

UniversalInput6

| ****

Universal input 6

mode selected by MSV.58

| ****

Out of service

| 0 to 10Volt or -40 to 100ºC (150ºC) † or

-40 to 212ºF (302ºF) † or 4 to 20mA or 0 to 1 Resolution: 0.01Volt or 0.01ºC/0.02ºF or 0.01mA or 1

AI.7

| ****

UniversalInput7

| ****

Universal input 7

mode selected by MSV.59

| ****

Out of service

| 0 to 10Volt or -40 to 100ºC (150ºC) † or

-40 to 212ºF (302ºF) † or 4 to 20mA or 0 to 1 Resolution: 0.01Volt or 0.01ºC/0.02ºF or 0.01mA or 1

AI.8

| ****

UniversalInput8

| ****

Universal input 8

mode selected by MSV.60

| ****

Out of service

| 0 to 10Volt or -40 to 100ºC (150ºC) † or

-40 to 212ºF (302ºF) † or 4 to 20mA or 0 to 1 Resolution: 0.01Volt or 0.01ºC/0.02ºF or 0.01mA or 1

Resolution: 0.1 ºC/ºF/Volt/mA

AV.227| UniversalInput2Offset| Universal input 2 offset| Present Value| -5.00 to 5.00 ºC/ºF/Volt/mA (default 0*)

Resolution: 0.1 ºC/ºF/Volt/mA

1 ID is equal to ObjectType.Instance

ID 1

|

Name

|

Description

|

Writable?

| *Notes ( = default)**

( † = only when UniversalInputxFunction is set to _10KType3/G )

---|---|---|---|---
AV.228| UniversalInput3Offset| Universal input 3 offset| Present Value| -5.00 to 5.00 ºC/ºF/Volt/mA (default 0*)

Resolution: 0.1 ºC/ºF/Volt/mA

AV.229| UniversalInput4Offset| Universal input 4 offset| Present Value| -5.00 to 5.00 ºC/ºF/Volt/mA (default 0*)

Resolution: 0.1 ºC/ºF/Volt/mA

AV.230| UniversalInput5Offset| Universal input 5 offset| Present Value| -5.00 to 5.00 ºC/ºF/Volt/mA (default 0*)

Resolution: 0.1 ºC/ºF/Volt/mA

AV.231| UniversalInput6Offset| Universal input 6 offset| Present Value| -5.00 to 5.00 ºC/ºF/Volt/mA (default 0*)

Resolution: 0.1 ºC/ºF/Volt/mA

AV.232| UniversalInput7Offset| Universal input 7 offset| Present Value| -5.00 to 5.00 ºC/ºF/Volt/mA (default 0*)

Resolution: 0.1 ºC/ºF/Volt/mA

AV.233| UniversalInput8Offset| Universal input 8 offset| Present Value| -5.00 to 5.00 ºC/ºF/Volt/mA (default 0*)

Resolution: 0.1 ºC/ºF/Volt/mA

AV.468| CopyCfgStartAdd| Copy configuration start address| Present Value| 0-254 Address of first CMMB to copy Available only if BV.101 is set to No

AV.469

|

CopyCfgEndAdd

|

Copy configuration end address

|

Present Value

| AV.468 – (AV.468 + 64)

Address of last CMMB to copy Available only if BV.101 is set to No

AV.470

|

CopyCfgResult 2

|

Copy configuration result

|

Present Value

| AV.468 – AV.469

Result of copy is available on Description property and is available only if BV.101 is set to Yes. Results: Succeed, Prog_Error, Type_Error, Model_Error, FW_Error, Mem_Error, Size_Error, Comm_Error, SlaveDevice, InProgress, AllSucceed

1= Reverse

BV.94| UI2_DI_Polarity| Polarity of universal input 2 when used in digital input mode| Present Value| 0= Direct *

1= Reverse

BV.95| UI3_DI_Polarity| Polarity of universal input 3 when used in digital input mode| Present Value| 0= Direct *

1= Reverse

BV.96| UI4_DI_Polarity| Polarity of universal input 4 when used in digital input mode| Present Value| 0= Direct *

1= Reverse

BV.97| UI5_DI_Polarity| Polarity of universal input 5 when used in digital input mode| Present Value| 0= Direct *

1= Reverse

BV.98| UI6_DI_Polarity| Polarity of universal input 6 when used in digital input mode| Present Value| 0= Direct *

1= Reverse

BV.99| UI7_DI_Polarity| Polarity of universal input 7 when used in digital input mode| Present Value| 0= Direct *

1= Reverse

BV.100| UI8_DI_Polarity| Polarity of universal input 8 when used in digital input mode| Present Value| 0= Direct *

1= Reverse

BV.101

|

CopyCfgExecute

|

Start or stop copy configuration

|

Present Value

| 0= No *

1= Yes

Start copy and give results, must be reset by user.

BV.102| SystemUnit| Select the unit system to use on the device| Present Value| 0= Celsius *

1= Fahrenheit

2 Write the address in the present value, result will be available in the description.

Modbus Registers

Register address
- As per the protocol base (base 0); for PLC add 1 to the protocol base.
- As per holding register (base 40001)
Functions :
- 03 Read Holding Register
- 06 Write Single Register
- 16 Write Multiple Registers
Error Codes :
- 02 Illegal Data Address
- 03 Illegal Value
- 06 Slave Device Busy
W = Writable register, [blank] = read-only.
No Real number in Modbus register, use scale to calculate real number. Register = Real number * Scale => Real number = Register / Scale. Scale could be 1, 10 or 100
Attention when writing a register that contains a bit string. If bit is writable (conditional or not), the write will always be accepted. If bit is reserved or not writable, the write will be ignored and will keep its actual state.
Use the READ-MODIFY-WRITE sequence.•

Register address

o As per the protocol base (base 0); for PLC add 1 to the protocol base.
o As per holding register (base 40001)

Functions :

```
* 03 Read Holding Register
```
- 06 Write Single Register
- 16 Write Multiple Registers

Error Codes :

```
* 02 Illegal Data Address
```
- 03 Illegal Value
- 06 Slave Device Busy
W = Writable register, [blank] = read-only.
No Real number in Modbus register, use scale to calculate real number. Register = Real number * Scale => Real number = Register / Scale. Scale could be 1, 10 or 100
Attention when writing a register that contains a bit string. If bit is writable (conditional or not), the write will always be accepted. If bit is reserved or not writable, the write will be ignored and will keep its actual state.
Use the READ-MODIFY-WRITE sequence.

Protocol Base

|

Holding Register

|

Description

|

Data Type

|

MSB/LSB

|

Units/Values

|

Writable

| Default Value
---|---|---|---|---|---|---|---
MB| LB
0| 40001| MSB = Neptronic Device ID LSB = MAC Address| Unsigned| 105 (69h)| [1..247]

(1h- F7h)

| MAC address is writable if all DIP switches of DS2 are OFF.| W| 69h| 1h

1

|

40002

|

Device Baud Rate

|

Unsigned Scale 0.01

| [96] [192] [384] [576]| 9,600

19,200

38,400

57,600

| |

96

2

|

40003

| COM Port Configuration

IMPORTANT : The default value is “no parity, 2 stop bits”. To change the value, you must set DIP switch DS1-3 to OFF. If set to ON, it will always remain at the default value. Refer to

Connections and Configurations

|

Unsigned

|

[0..2]|

0 = no parity, 2 stop bits 1 = even parity, 1 stop bit 2 = odd parity, 1 stop bit

|

W

|

0

3| 40004| Product Name (characters 8 & 7)| 2 x ASCII| char 8| char 7| Valid ASCII character: 32 (20h) – 122 (7ah), Empty = 0| W| 43h [C]| 40h [M]
4| 40005| Product Name (characters 6 & 5)| 2 x ASCII| char 6| char 5| Valid ASCII character: 32 (20h) – 122 (7ah), Empty = 0| W| 40h [M]| 42h [B]
5| 40006| Product Name (characters 4 & 3)| 2 x ASCII| char 4| char 3| Valid ASCII character: 32 (20h) – 122 (7ah), Empty = 0| W| 31h [1]| 30h [0]
6| 40007| Product Name (characters 2 & 1)| 2 x ASCII| char 2| char 1| Valid ASCII character: 32 (20h) – 122 (7ah), Empty = 0| W| 36h [6]| 20h [ ]
7| 40008| Firmware Version| Unsigned Scale 100| 102| 1.02| | 102

Protocol Base

|

Holding Register

|

Description

|

Data Type

|

MSB/LSB

|

Units/Values

|

Writable

| Default Value
---|---|---|---|---|---|---|---
MB| LB
8| 40009| Application Version| Unsigned Scale 100| 100| 1.00| | 100

9

|

40010

|

System Status 1

|

Bit String

|

[B0..B15]| 0 = Normal

1 = Fault

– – – – – – – – – – – – – – – – – – –

B0 = System operation

| |

0000, 0001, 1111, 1110b

10| 40011| System Status 2| Bit String| [B0..B15]| Always 0| | 0000, 0000, 0000, 0000b
11| 40012| Analog Input 1|

0-10V: Type: Unsigned, Scale:100, Unit: Volt, Range: 0.00-10.00V, Resolution: 0.01 4-20mA: Type: Unsigned, Scale:100, Unit: mA, Range: 4.00-20.00 mA, Resolution: 0.01 10K Type 3A1, 10K Type 4AI, 10K Type 2, 20K Type 6AI, 30K Type 6AI:

Type: Signed, Scale:100, Unit: ºC, Range: -40.00 – 100.00 ºC, Resolution: 0.01 Type: Signed, Scale:100, Unit: ºF, Range: -40.00 – 212.00 ºF, Resolution: 0.02

10K Type 3/G:

Type: Signed, Scale:100, Unit: ºC, Range: -40.00 – 150.00 ºC, Resolution: 0.01 Type: Signed, Scale:100, Unit: ºF, Range: -40.00 – 302.00 ºF, Resolution: 0.02

DI: Type: Unsigned, Scale:1, No Unit, Range: 0-1, Resolution: 1

| | 0
12| 40013| Analog Input 2| 0
13| 40014| Analog Input 3| 0
14| 40015| Analog Input 4| 0
15| 40016| Analog Input 5| 0
16| 40017| Analog Input 6| 0
17| 40018| Analog Input 7| 0
18| 40019| Analog Input 8| 0
19 to 25| 40020 to

40026

| Reserved| | | | |
26| 40027| Universal Input 1 Function|

Unsigned

|

[1..10]|

1= 0_10V

2= 4_20mA

3= 10K_Type3/G *

4= 10K_Type3A1

5= 10K_Type4A1

6= 10K_Type2

7= 20K_Type6A1

8= 30K_Type6A1

9= Digital_Input

10= 10K_NTC_Carel

|

W

| 3
27| 40028| Universal Input 2 Function| 3
28| 40029| Universal Input 3 Function| 3
29| 40030| Universal Input 4 Function| 3
30| 40031| Universal Input 5 Function| 3
31| 40032| Universal Input 6 Function| 3
32| 40033| Universal Input 7 Function| 3
33| 40034| Universal Input 8 Function| 3
34| 40035| Universal Input 1 Offset|

Signed Scale 100

|

[0..100]|

Range: +/- 5.00, Resolution: 0.1

|

W

| 0
35| 40036| Universal Input 2 Offset| 0
36| 40037| Universal Input 3 Offset| 0
37| 40038| Universal Input 4 Offset| 0
38| 40039| Universal Input 5 Offset| 0
39| 40040| Universal Input 6 Offset| 0

Protocol Base

|

Holding Register

|

Description

|

Data Type

|

MSB/LSB

|

Units/Values

|

Writable

| Default Value
---|---|---|---|---|---|---|---
MB| LB
40| 40041| Universal Input 7 Offset| Signed Scale 100| [0..100]|

Range: +/- 5.00, Resolution: 0.1

|

W

| 0
41| 40042| Universal Input 8 Offset| 0
42 to 53| 40043 to

40054

54

|

40055

|

System Options

* = digital input mode only

|

Bit String

|

[B0..B15]| 0 = Direct

1 = Reverse

– – – – – – – – – – – – – – – – – – –

B0 to B3 = Reserved B4 = AI1 polarity B5 = AI2 polarity B6 = AI3 polarity B7 = AI4 polarity B8 = AI5 polarity B9 = AI6 polarity B10 = AI7 polarity B11 = AI8 polarity B8 to B14 = Reserved

– – – – – – – – – – – – – – – – – – –

0 = Celsius

1 = Fahrenheit

– – – – – – – – – – – – – – – – – – –

B15 = System Unit

|

W

|

0000, 0000, 0000, 0000b

55 to 76| 40056 to

40077

| Reserved| | | | |
77| 40078| UI1 Pulse Prescaler (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 1
78| 40079| UI1 Pulse Prescaler (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
79| 40080| UI2 Pulse Prescaler (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 1
80| 40081| UI2 Pulse Prescaler (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
81| 40082| UI3 Pulse Prescaler (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 1
82| 40083| UI3 Pulse Prescaler (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
83| 40084| UI4 Pulse Prescaler (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 1
84| 40085| UI4 Pulse Prescaler (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
85| 40086| UI5 Pulse Prescaler (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 1
86| 40087| UI5 Pulse Prescaler (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |

Protocol Base

|

Holding Register

|

Description

|

Data Type

|

MSB/LSB

|

Units/Values

|

Writable

| Default Value
---|---|---|---|---|---|---|---
MB| LB
87| 40088| UI6 Pulse Prescaler (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 1
88| 40089| UI6 Pulse Prescaler (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
89| 40090| UI7 Pulse Prescaler (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 1
90| 40091| UI7 Pulse Prescaler (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
91| 40092| UI8 Pulse Prescaler (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 1
92| 40093| UI8 Pulse Prescaler (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
93| 40094| UI1 Pulse Count (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
94| 40095| UI1 Pulse Count (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
95| 40096| UI2 Pulse Count (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
96| 40097| UI2 Pulse Count (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
97| 40098| UI3 Pulse Count (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
98| 40099| UI3 Pulse Count (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
99| 40100| UI4 Pulse Count (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
100| 40101| UI4 Pulse Count (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
101| 40102| UI5 Pulse Count (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
102| 40103| UI5 Pulse Count (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
103| 40104| UI6 Pulse Count (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
104| 40105| UI6 Pulse Count (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
105| 40106| UI7 Pulse Count (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
106| 40107| UI7 Pulse Count (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
107| 40108| UI8 Pulse Count (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
108| 40109| UI8 Pulse Count (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
109| 40110| UI1 Accumulator (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
110| 40111| UI1 Accumulator (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |

Protocol Base

|

Holding Register

|

Description

|

Data Type

|

MSB/LSB

|

Units/Values

|

Writable

| Default Value
---|---|---|---|---|---|---|---
MB| LB
111| 40112| UI2 Accumulator (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
112| 40113| UI2 Accumulator (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
113| 40114| UI3 Accumulator (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
114| 40115| UI3 Accumulator (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
115| 40116| UI4 Accumulator (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
116| 40117| UI4 Accumulator (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
117| 40118| UI5 Accumulator (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
118| 40119| UI5 Accumulator (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
119| 40120| UI6 Accumulator (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
120| 40121| UI6 Accumulator (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
121| 40122| UI7 Accumulator (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
122| 40123| UI7 Accumulator (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |
123| 40124| UI8 Accumulator (0)| Unsigned Scale 1| [0…16777216]| Range: 0 to 16777216, Resolution: 1| W| 0
124| 40125| UI8 Accumulator (1)| | [0…16777216]| Range: 0 to 16777216, Resolution: 1| |

Recycling at end of life: please return this product to your Neptronic local distributor for recycling. If you need to find the nearest Neptronic authorized distributor, please consult www.neptronic.com.

400 Lebeau blvd, Montreal, Qc, H4N 1R6, Canada

www.neptronic.com

Toll-free in North America: 1-800-361-2308 Tel.: 514-333-1433 Fax: 514-333-3163 Customer service fax: 514-333-1091
Monday to Friday: 8:00 am to 5:00 pm (Eastern time)