VEVOR HE-18C-48E-EU Electric Honey Extractor4 8frames User Manual

VEVOR HE-18C-48E-EU Electric Honey Extractor4 8frames

Product Information

The Electric Honey Extractor 4-8frames is a tool designed to extract honey from beehive frames. The model number of this product is HE-18C-48E-EU and it operates on a voltage/frequency of 220V-240V50Hz. The honey extractor has a speed regulation range of 32-40cm(lifting) and a capacity of 4-8 frames. The frames that fit this honey extractor are Large frame: L415mm W200mm and Small frame: L415mm W135mm. The main materials used in constructing this product is 201 stainless steel. The honey extractor also has an automatic stop when open the lid feature and locked rotor current (overload protection) feature.

Product Usage Instructions

1. Start by assembling the support legs. Align the holes on the three legs with the corresponding three holes on the barrel and insert screws into the holes, and tighten them with a screwdriver.
2. Erect the barrel and unscrew the honey outlet connector. Then, put the honey outlet at the corresponding outlet outside the barrel. Finally, put the plastic nut into the barrel, connect it with the honey outlet connector, and tighten it.
3. Assemble the two lids with screws.
4. Put the beehive frames of different sizes with honey into the corresponding frames in the barrel.
5. Connect the power cord to the electrical port to power the honey extractor.
6. Turn the key to position 1, power on, and adjust the speed control knob to start the honey extractor.
7. If you open the lid, the motor will stop working automatically. And if you close the lid, the motor will work normally.
8. To take out the honey, first loosen the screw. Then hold the handle of the honey outlet connector, lift it to open the honey outlet, and let the honey flow out.

Troubleshooting Instructions

The plug is not tightly plugged in
The switch is not turned to 1
The speed control knob is not adjusted| Ensure the barrel is stable
Check if the plug is tightly plugged in
Turn the switch to 1
Adjust the speed control knob

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:
CustomerService@vevor.com

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

For your safety and the safety of others, the following precautions must be observed when operating the honey extractor:

1. Make sure the honey extractor is clean before use;
2. The speed of the honey extractor must not be too high or too low. Adjust the speed according to the amount of nectar or usage habits;
3. Connect to the grounding pile to fix the honey extractor;
4. First turn off the switch, then power on the honey extractor, and then adjust the speed knob to control the speed of the honey extractor;

WARNING:

1. Turn off the power when not in use.
2. Do not disassemble or change this machine.

MODEL AND PARAMETRS

32-40cm(lifting)

Frames| 4-8 frames
Fit frame size| Large frame: L415mm * W200mm Small frame:

L415mm * W135mm

Main materials| 201 stainless steel
Automatic stop when open the lid| Yes
---|---
Locked rotor current (overload protection)| 1.404-1.648A

STRUCTURE DIAGRAM

ASSEMBLY AND USE

Step 1: Installation of Support Legs.

First, take out the three legs and place the barrel on the ground. Next, align the holes on the three legs with the corresponding three holes on the barrel, insert screws into the holes, and tighten them with a screwdriver.
Step 2: Installation of the Honey Valve.

First, erect the barrel and unscrew the honey outlet connector. Then, put the honey outlet at the corresponding outlet outside the barrel. Finally, put the plastic nut into the barrel, connect it with the honey outlet connector, and tighten it.
Step 3: Installation of Honey Extractor Lid.

Assemble the two lids with screws.

Step 4: Put the beehive frames of different sizes with honey into the corresponding frames in the barrel.

Step 5: Connect the power cord to the electrical port to power the honey extractor.

Step 6: Turn the key to position 1, power on, and adjust the speed control knob to start the honey extractor.

Step 7： If you open the lid, the motor will stop working automatically. And if you close the lid, the motor will work normally.

Step 8 : Take out the honey

First, loosen the screw. Then hold the handle of the honey outlet connector, lift it to open the honey outlet, and let the honey flow out.

TROUBLESHOOTING INSTRUCTION

The plug is not tightly plugged in

| ****

Insert the plug firmly

---|---|---

The switch is not turned to 1

| ****

Turn the switch to 1

The speed control knob is not adjusted| Adjust the control knob

Barrel shaking

| The frames are not placed symmetrically| Place the frames symmetrically

The feet are not fixed on the ground

| ****

Fix the feet on the ground

CLEAN,CARE AND STORAGE RULES

Care and cleaning :
The honey extractor shall be thoroughly cleaned and dried before use. Especially the one that has not been used for a long time, shall be disassembled and cleaned. Otherwise, the honey stains and other impurities left in the honey shaker will pollute the honey. After using the honey extractor, clean the inner and outer walls of the barrel and its stainless steel frame. And dry them with a clean and dry cloth, use a hair dryer, or let them air dry to keep them clean to prepare for the next use.

Storage :
Please store it out of the reach of children;
After using the honey extractor, place it in a cool place and cover it with a large cloth to prevent dust from entering.
Manufacturer： Changge Xinao Bee Industry Co. Ltd

Add： He Shang Yang Village, Da Zhou Town, Changge City, Xuchang City, Henan Province

Made in China
Importeur: WAITCHX
Adresse: 250 bis boulevard Saint-Germain 75007 Paris

EUREP GmbH
Unterlettenweg 1a, 85051
Ingolstadt, Germany
Support and E-Warranty Certificate
https://www.vevor.com/support

References

• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>