LINDY DST-Mini Plus USB-C Laptop Mini Docking Station User Manual
- June 11, 2024
- LINDY
Table of Contents
DST-Mini Plus
No. 43278
User Manual
Introduction
Thank you for purchasing the DST-Mini Plus. This product has been designed to
provide trouble free, reliable operation. It benefits from both a LINDY 2 year
warranty and free lifetime technical support. To ensure correct use, please
read this manual carefully and retain it for future reference.
The DST-Mini Plus with VGA is a compact, multifunctional solution for hybrid
workers. Housed in a robust aluminium with a high-quality braded USB-C cable,
this laptop docking station has been designed for durability during travel.
With support for HDMI and VGA, this product is ideal for those who have a
legacy monitor they wish to plug their device into.
Package Contents
- DST-Mini Plus
- This manual
Features
- Compatible with USB Type C equipped computers with DisplayPort Alternate Mode support
- Input: USB Type C connector – male, 1x USB Type C female (only for charging, no data transfer)
- Output: HDMI A female, VGA female, 3x USB Type 3.2/ 3.1 Gen 1 / 3.0 Type A female, RJ45 female, SD and microSD card slot
- USB 3.2 / 3.1 Gen 1 / 3.0 standard (5 Gbps)
- Max. resolution: 3840×2160 30Hz (HDMI), 1920×1080 60Hz (VGA)
- Works as a splitter if both VGA and HDMI are connected at the same time, max. resolution 1920×1080@60Hz with the same video content
- 10/100/1000Mbps Gigabit Ethernet
- USB Type C Power Delivery input port for charging (no data transfer) with max. 100W (20V / 5A)
- Special Features: DisplayPort Alternate Mode, Supports MAC Address pass through (this feature is dependent upon the compatibility of the hardware used in each set up)
Installation & Operation
The DisplayPort Alternate Mode uses the USB C connector as a video output
without the need for additional drivers or software. Please check that your
computer supports this feature.
To begin using the DST-Mini Plus simply connect the USB Type C male connector
to the USB Type C port of your computer. Any required drivers will be
automatically downloaded from the internet. Then connect the HDMI socket
and/or VGA socket of the DST-Mini Plus to the HDMI/VGA port of your monitor
using appropriate male to male cables (not included). Use a standard RJ45
Ethernet cable (not included) to connect to your network. Additional USB
devices can be connected to the USB Type A ports of the DSTMini Plus, USB
5Gbps data transfer rates are supported whilst legacy USB 2.0/1.1 devices may
also be connected.
The SD and microSD card slots allow access to SD and micro SD cards.
By connecting a compatible USB Type C power supply (not included) it is also
possible to charge your Macbook or Notebook using the Type C Power Delivery
port, just connect the power supply to the Power Delivery port when required.
Note: To use the “MAC address pass-through” feature, the setting must be
enabled in the BIOS. The location of the setting varies for each manufacturer.
Change the setting to Enabled, then exit the BIOS while saving changes to the
BIOS setting.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of
Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process. Each individual EU
member state, as well as the UK, has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modification not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Hersteller / Manufacturer (EU):.
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com , T: +49 (0)621 470050|
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk , T: +44 (0)1642 754000
---|---
Tested to comply with
FCC standards.
For home and office use.
No. 43278
2nd Edition, March 2023
lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>