Newell Portable Car Jump starter CarMate 12000mAh Instruction Manual
- June 11, 2024
- Newell
Table of Contents
Newell Portable Car Jump starter CarMate 12000mAh
Product Information
This product is subject to change without prior notice, as the manufacturer reserves the right to modify the information contained in the user manual. It is important to read and follow the instructions carefully to ensure safe and effective use of the product.
Product Usage Instructions
- Read the user manual carefully before using the product.
- Make sure that the product is suitable for your intended use.
- Follow the instructions for assembly, installation, and operation of the product.
- Always use the product in accordance with the instructions provided.
- Do not modify or attempt to repair the product yourself. Contact the manufacturer for assistance in case of malfunction or damage.
- Keep the product away from children and pets.
- Store the product in a dry and safe place when not in use.
- Dispose of the product in accordance with local regulations.
SAFETY INSTRUCTIONS
Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.
- Do not expose the device to water or other sources of moisture.
- Do not throw, hit or shake the device – otherwise it may damage the parts inside and eventually damage the entire device.
- Keep the Jump Starter away from fire and other sources of high temperature.
- Place in a cool and dry place.
- For use by adults.
- Do not use non-standard charger to charge the product.
- Beware of short circuit. It may lead to products function failure.
- Please make sure that the power is above 70% when you use it to start your car.
- Please ensure that the end of the smart jump clamps is fully inserted into the product 12V car start port when you use it to start your car, otherwise the device could melt.
- Please use the jump clamps which comes with the device only. When the battery clip or wire is damaged, please stop using it to avoid personal injury such as fire and electric shock.
- Before starting, make sure there is no rust and foreign matter a the interface, and tightly connect the device with the jump clamps. Non-tight connection will affect the starting performance of the device.
- Do not use the device to continuously start the car more than 3 times.it may cause the product to overheat and damage the product. Each starting should be separated by two minutes.
- After successfully starting, please remove the product from the car battery within 30s, otherwise it may cause damage.
PRODUCT DESCRIPTION
USAGE
How to Charging the Jump Starter:
- Connect the Jump Starter and the power source via the USB-C cable.
- Short press the ON/OFF button to turn on the product. While charging the Jump Starter, the LED Display Screen will show the percent power increased. Once it is fully charged, the LCD Display Screen will show 100%.
- Unplug the cable when no charge is required.
NOTE:
- When using the product for the first time, please make sure that the Jump Starter is fully charged.
- Wall adapter is not included in the package.
- Before using the Jump Starter, please fully charge the jump starter to 100% then fully used until the battery is 0% and the power is turned off.
- Then recharge to 100% (don’t charge or output the power bank In the process, regardless of the number of times of use) After repeating the above steps 5-8 times, the digital display will be more accurate.
- In cold winter, we suggest storing the Jump Starter indoors instead of the car.
How To Jump Start 12V Vehicles
NOTE: This product is for 12V car only. Check to make sure that battery
level is above 70% before you use it to Jump Start your car.
- Step 1: Insert the plug of the smart battery clamp completely into the Jump Starter. If the green and red light indicators on the battery clamp are flashing alternately you are safe to move on to to the next step.
- Step 2: Connect the red clamp to the positive terminal(+) of the car battery and connect the black clamp to the negative terminal(-) of the car battery. If the green light on the clamp is on with click sound, you are safe to move on to the next step.
- Step 3: Start your car. When the indicator light of the smart clamp is green, you need to start the vehicle within 30s. If over 30s, the clamp will stop working, you need to connect again from Step 1. If you failed to start your car, you need to disconnect the battery clamp from the vehicle and the Jump Starter. Wait for at least 1mins, then try again.
Force Start Function
- If you are sure you followed every step and the red light is always on, please try the force start function.
- a. Insert the plug of the smart battery clamp completely into the Jump Starter.
- b. Connect the red clamp to the positive terminal(+ of the car battery and connect the black clamp to the negative terminal(-) of the car battery. The wrong connection will cause short-circuited.
- c. Hold presing press Force Button for 3 seconds, then the green light will be on.
- d. Get back to your car in 30s then start the engine.
- Step 4: Once your car is started, please remove the battery clamp from the car-battery and the Jump Starter within 30 seconds.
TROUBLESHOOTING
Red Light is ON
- Overtime – After the green light is on, you need to go back to the car in the 30s, if over 30s, the clamp will stop output. You need to disconnect all connections and repeat the steps again.
SPECIFICATION
PACKAGE CONTENTS
- 1*Car jump starter
- 1*Smart Battery Clamp
- 1*DC- Cigarette Lighter Adapter
- 1*USB-C Charging Cable
- 1*User Manual
- 1*EVA Bag
- The manufacturer reserves the right to change the information contained in this manual without prior notice.
WASTE MANAGEMENT
- The crossed-out trashcan symbol means that waste electrical and electronic equipment, batteries, and packaging must not be placed with other household waste. They must be handed over to a separate waste collection system.
WARRANTY
- Newe Newell products are covered by a 40-month manufacturer’s warranty.
- Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>