LIMITLESS RFID Blocking Wallet Power Bank User Guide
- June 11, 2024
- Limitless
Table of Contents
LIMITLESS RFID Blocking Wallet Power Bank
TECH SPECS
- Model: LIM-RFIDW-XXX
- Battery Capacity: 4,000mAh Recharging Time (From 0%): ± 4 Hours
- Type-C Input: 5V/2A
- USB Output: 5V/2A
- Built-in Type-C Cable Output: 5V/2A Flashlight: 18 Lumens
- Dimensions: 5.17in x 3.04in x 0.95in Weight: 6.00 oz (0.37lbs)
- Material: Faux Leather, ABS Plastic, PVC Cable, & Aluminum
WHAT’S INCLUDED
- (1) RFID Blocking Wallet + Power Bank with Built-In Type-C Cable
- (1) Lightning Adapter
- (1) Micro Adapter
- (1) Faux Leather Strap
- (1) 24in Type-C to USB Charging Cable
COMPONENTS
- Faux Leather Carrying Strap
- 5-Slot Card Holder
- Lightning Adapter
- Built-In Type-C Charging Cable
- Adapter Slots
- Micro Adapter
- USB Charging Port (Output)
- 4x LED Battery Indicator Lights
- Type-C Port (Input)
- Flashlight
- Power Button
SAFETY INFORMATION
By using the Limitless RFID Blocking Wallet, you hereby agree that Limitless Innovations, Inc., an Illinois corporation and its affiliates (“Limitless”) shall have no liability for any losses associated with property damage, personal injury or loss of life that are incurred by you or by any third party in connection with or relating in any manner whatsoever to your use of the Limitless RFID Blocking Wallet. By using the Limitless RFID Blocking Wallet, you hereby agree at all times to comply fully with all safety warnings, operating instructions, and general safety information in this user manual. By using the Limitless RFID Blocking Wallet, you further agree to hold harmless Limitless, (and Limitless’ officers, directors, shareholders and employees) in connection with any losses sustained by you (including, without limitation, losses arising in whole or in part from property damage, personal injury or loss of life) relating in any manner whatsoever to your use of the Limitless RFID Blocking Wallet.
WARNING
- The Limitless RFID Blocking Wallet is NOT a toy and should be kept away from children.
- Do NOT use the Limitless RFID Blocking Wallet near a magnetic or electric field.
- Do NOT use the Limitless RFID Blocking Wallet in direct sunlight or extreme heat for extended periods of time.
- Do NOT use the Limitless RFID Blocking Wallet if it has been damaged and/or modified.
- Do NOT subject the Limitless RFID Blocking Wallet to harsh chemicals.
- Do NOT submerge the Limitless RFID Blocking Wallet or its accessories in water.
- Do NOT insert any foreign objects into the openings or port of the Limitless RFID Blocking Wallet.
- Do NOT charge the Limitless RFID Blocking Wallet in high humidity conditions.
- Do NOT attempt to replace the battery as it is a non-serviceable part.
- Do NOT attempt to disassemble, repair, or open the Limitless RFID Blocking Wallet or its accessories in any way.
- Do NOT paint or apply coatings to the Limitless RFID Blocking Wallet as you might affect moving parts or damage internal components.
- Do NOT use third party power supplies or non-approved adapters with the Limitless RFID Blocking Wallet.
- Batteries should be recycled or disposed of, as per state and local guidelines.
AIR TRAVEL
- You may carry the RFID Blocking Wallet on an airplane. Do NOT travel with the RFID Blocking Wallet in your checked baggage.
- For more information, visit: https://www.faa.gov/travelers
GETTING STARTED
- The RFID Blocking Wallet will arrive with a partial charge. It is recommended to charge the battery to 100% upon arrival and each use.
CHARGING THE POWER BANK
- Plug the included 24in Type-C to USB Charging Cable into the Type-C Port
- (Input) and into a USB power source
- (not included). The 4x LED Battery Indicator Lights will blink while charging and will go solid once fully charged.
RECHARGING A DEVICE
First, determine which charging connection the device needs: Type-C, Micro, or Lightning.
- A. If Type-C, use the Built-In Type-C Charging Cable and plug it directly into the charging port of the device. The device will begin to charge.
- B. If Micro or Lightning, remove the compatible adapter and connect it to the Built-In Type-C Charging Cable. See Figure 1 & 2 (below). Once the Adapter is installed, plug it into the charging port of the device. The device will begin to charge.
CHECKING THE BATTERY LEVEL
- Press the Power button once to check the battery level. The 4x LED Indicator Lights will illuminate indicating how much battery is left. See below.
COMPATIBILITY
Micro Cable:
- Compatible with select Tracfones, Speakers, Cameras, Power Banks, and More
Lightning Cable:
- Compatible with iPhones, AirPods, & Most Apple Devices
Type-C Port (Input/Output):
- Compatible with newer devices by Samsung, Microsoft, Google, LG, Huawei, select Apple iPads (2018 and newer), select Tracfones, and More
USING THE FLASHLIGHT
- Press and hold the Power Button for 3 seconds to turn on the Flashlight. Press and hold again to turn the light off.
RFID
- Credit Cards, Passports, and IDs often utilize RFID chips that contain your personal data. This RFID Blocking Wallet uses a layer of aluminum to block the electromagnetic signal emitted from these items to create a barrier and cancel out electromagnetic signals.
- The manufacturer and distributor of this product disclaim any liability arising out of your use of this wallet, including liability from unauthorized persons scanning any RFID chip contained in this wallet.
- Scan to learn more about using the features of your RFID Blocking Wallet:
- All rights reserved. Limitless™ is a trademark of Limitless Innovations, Inc.
- Design and specifications subject to change without notice.
- Products may vary from the images shown. Accessories are sold separately.
- LimitlessInnovations.com
- Support@LimitlessInnovations.com
- 855-843-4828
- Limitless Innovations, Inc.
- 4800 Metalmaster Way
- McHenry, IL 60050
- © Limitless Innovations, Inc.
References
- Cutting-Edge Consumer Electronic & Tech | Limitless Innovations
- Travelers | Federal Aviation Administration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>