LIMITLESS A1617A Power Bank with Docking Station User Manual
- October 27, 2023
- Limitless
Table of Contents
LIMITLESS A1617A Power Bank with Docking Station User Manual
What’s included
- USB C wall charger
- Charging dock
- 10000mah powerbank
- Usb c to c 2.0 cable
Tech Specs
Type c wall charger：
Input：110V~240VAC,50/60Hz,1.6A
Output：12VDC 3.67A ,44W
Charging docking：
- TYPE-C3 input：12V/3.67A
- TYPE-C1 Output：5V/3A、9V/2.22A、12V/1.67 PD20W
- TYPE-C2 Output：5V/3A、9V/2.22A、12V/1.67 PD20W
- USB-A1 Output：5V/3A、9V/2A、12V/1.5 QC3.0 18W
- USB-A2 Output： 5V/3A、9V/2A、12V/1.5 QC3.0 18W
- USB-A1 + TYPE-C1 Output:5V/3A 15W MAX
- USB-A2 + TYPE-C2 Output:5V/3A 15W MAX
- USB-A1 + USB-A2 Output：QC3.0 18W + QC3.0 18W TOATL 36W
- TYPE-C1 + TYPE-C2 Output：PD 20W + PD 20W total 40W
- USB-A1 + TYPE-C1 + USB-A2 Output：5V/3A + QC 18W TOTAL 31W
- USB-A1 + TYPE-C1 + TYPE-C2 Output：5V/3A + PD 20W TOTAL 35W
- USB-A2 + TYPE-C2 + USB-A1 Output：5V/3A + QC 18W TOTAL 31W
- USB-A2 + TYPE-C2 + TYPE-C1 Output：5V/3A + PD 18W TOTAL 35W
- TYPE-C1 + TYPE-C2 +USB-A1 +USB-A2 Output：total
10000Mah wireless powerbank
Capacity：10000mah
TYPE-C1 input：5V/3A、9V/2A、12V/1.5A PD 18W
TYPE-C1 Output： 5V/3A、9V/2A、12V/1.5A PD 18W
USB-A1 Output：5V/2.4A
USB-A2 Output：5V/3A、9V/2A、12V/1.5A QC3.0 18W
wireless charging Output：5W//7.5W/10W MAX
USB-A1 + USB-A2 + TYPE-C1 Output：18W + 10W TOTAL 28W MAX
USB C to C 2.0 cable
Material：PVC
length：1M
OD:3.0
Data transfer speed：480Mbps
Use steps
-
Connect the USB TYPE C cable between the wireless charging dock andTypec wall charger ,plug in the type c wall charger，the led light shows Red. And put the wireless power bank on the charging dock,the led light shows Red
-
To set up the clock,
A. Press and hold the left button “M” for 3 seconds until the clock hour unit flashes and then press “-” “+” to adjust the hour duration.
B. Press and hold the left button “M” for 3 seconds until the clock hour unit flashes, then press “M” once to adjust the minutes and press “M” once to confirm.
-
Put the your device in the charging area, try put it near the charging centreas close as possible
-
Put the your device（with wireless receiving board）on the wireless charger （shows Red light），
-
The receiving device is removed from wall charger（shows flash light）
Light status：
- Power on：Red light
- Stand by：Red light
- On charging：Red light
- No wall charger connect to the charging dock:flash red light
Standard Accessories
10000mah wireless power bank1
Type c wall charger1
Charging dock1
User manual1
Usb C to C charging cable*1
Attention
- This product must be used as required, otherwise it will cause a fire, explosion and other danger risks. 2. Check the power adapter parameters are with reliable quality and securitybefore, whether the CHARGER is quick charge（r QC2.0/QC3.0）or not, as this may cause to no charge or low charge and may even damage the power adapter
- Check the usb cable is suitable connector for connections, make sure the charging cable should meet the current on 2A,or it will cause no charge or low charge, negative phenomena such as frequent start
- Do not pull the AC adapter out with wet hands, ensure the safety and integrity of the adapter;
- Do not let the dust or other things accumulate on the product and the AC adapter;
- Do not use the product outside the temperature-20 ℃to 40 ℃;
- Do not attempt to open, throw, hit or shake the wireless charger
- Ensure the charging platforms and devices are not overheating, such as overheating, please cut off the power supply, to cool before attempting to charge
- If your protective case is thick，remove it before placing your device on the wireless charger
Warming
Don’t intestinally disassemble and maintenance the product if non
professional. Removing the product may result in damage that beyond the
warranty.
Battery Warming
- replacement of a battery with an incorrect type may defeat a safeguard;
- disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, may result in an explosion;
- leaving a battery in an extremely high temperature surrounding environment, such as sunshine, fire, or hot surface may result in an explosion or the leakage of flammable liquid or gas;
- a battery subjected to extremely low air pressure may result in an explosionor the leakage of flammable liquid or gas.
- Risk of fire or explosion if the battery is replaced by an incorrect type!
FCC Warming
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
- Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.