WIRELESS LIMITLESS Fantasy Wireless Charger User Manual
- June 6, 2024
- WIRELESS LIMITLESS
Table of Contents
WIRELESS & LIMITLESS
Product Introduction
Fantasy wireless charger is an intelligent product, with a simple design and
compatible with any mobile phone with Qi standard. Mobile phone is without a
plug when charging, which is more convenient and efficient. It can bring you
limitless life experience as well as a safe and free experience with a
wireless charging function.
Product Outline
Universal Compatible
Supports all enabled wireless charging devices such as iPhone X. Xs, XR, Xs
Max.8.8Plus. Samsung Galaxy Note8, Note9, S10, 510+. 59. S9+.S8, S8+1S8 Plus.
S7, S7 Edge, S6, S6 Edge, and other enabled devices
7.5W Fast Charge Mode for iPhone Series Requires QC 2.0/3.0 adapter(5V-
2A,9V-1.67A) adapter not included
10W Fast Charge Mode for Samsung Series Requires QC 2.0/3.0 adapter(5V-
2A,9V-1.67A) adapter not included
Instructions
- Insert one end of the USB charging cable into the power adaptor or computer. shown as below.
- Insert another end of the USB charging cable into the USB port of the wireless charger. The LED indicator lights up to indicate well connectivity.
- Place your phone on the wireless charger. Make sure that the phone is well located in the charging area of the wireless charger. When the phone is being charged, the LED indicator will light up automatically to show the charging status.
Standard Accessories
Fantasy Wireless Charger USB Cable
User Manual
Product Specification
Input: 9V/1.67A 5V/2A Charging Distance: .Amm Charging Efficiency: ?_76% Size:
0100mm X 5mm
Attention:
- Please keep the charger away from water or other liquid.
- If you need to clean the charger, please make sure it is not connected power supply.
- Using Environment temperature remains 0 -45°C.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: -Reorient or relocate
the receiving antenna. -Increase the separation between the equipment and
receiver. -Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. -Consult the dealer or an experienced
radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>