LIMITLESS LIM-TD-001 TotalDesk Portable Workstation And Lap Desk User Manual
- June 5, 2024
- Limitless
Table of Contents
LIMITLESS LIM-TD-001 TotalDesk Portable Workstation And Lap Desk
By using the TotalDesk™ you hereby agree that Limitless Innovations, Inc., an
Illinois corporation and its affiliates (“Limitless”) shall have no liabil ity
for any losses associated with property damage, personal injury or loss of
life that are incurred by you or by any third party in connection with or
relating in any manner whatsoever to your use of the TotalDesk™. By using the
TotalDesk™, you hereby agree at all times to comply fully with all safety
warnings, operating instructions and general safety information in this User
Manual. By using the TotalDesk™, you further agree to hold harmless Limitless,
(and Limitless’ officers, directors, shareholders and employees) in connection
with any losses sustained by you (including, without limitation, losses
arising in whole or in part from property damage, personal injury or loss of
life) relating in any manner whatsoever to your use of the TotalDesk™.
SAFETY WARNINGS
-
Do NOT sit, stand, jump on, or otherwise apply excessive weight or
pressure to the TotalDesk™. -
Do NOT exceed the weight limit of 20lbs on the Desktop. Exceeding this weight limit may result in bowing of the desktop and/or damage to the Legs of the TotalDesk™ and will void the Warranty.
-
The TotalDesk™ and its accessories are NOT toys and should be kept away from children.
-
Do NOT attempt to modify, disassemble, or repa ir the TotalDesk™ and/or any of its accessories. Doing so will void the warranty.
-
Do NOT expose the TotalDesk™ extreme heat or place near fi re.
-
Do NOT use sharp objects on the TotalDesk™. Doing so will scratch or tear the PVC leather Desktop.
-
If this device is accessible to or may be used by a minor, purchasing adult agrees to be solely responsible for providing supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold Limitless harmless for any claims or damages arising from unintended use or misuse by a minor.
TotalDesk™ Specifications
Desktop Size
23.00 in x 14.50 in
Desktop Height
10.25 in (Min)
13.25 in (Max)
Materials
ABS, PVC, Polypropylene, Aluminum
Min Size (Folded)
Length: 23.00 in
Width: 14.50 in
Height: 2.75 in
Max Size (Standing)
Length: 23.00 in
Width: 14.50 in
Height: 13.25 in
COMPONENTS
-
Desktop
-
Accessory Slot
-
Book/Tablet Stand
-
Phone Mount
-
Desktop Stopper
-
Desk Leg
-
Height Adjustment Lock
-
Surface Glides
-
Phone Mount Bracket
-
Tilting Adjustment Lever
-
Cable Openings
-
Book/ Tablet Stand Storage
-
Drawer
-
Foldable Leg Joints
SETTING UP THE TOTALDESK™
FOLD
With the Desktop facing down, push the legs inward until they are completely
folded down.
UNFOLD
With the Desktop facing down, pull the Desk Legs upwards until they lock in
place.
ADJUSTING THE TABLE HEIGHT
The TotalDesk'” has 4 height positions to choose from.
UP
While holding the Desk Leg, pull up on the Desktop. It will automatically lock
in place at the first height position. Repeat until the desired height
position is met.
DOWN
Press and hold the Height Adjustment Lock and lightly push the Desktop down.
Release the Height Adjustment Lock to align with the desired height position.
Repeat this step on the opposite Desk Leg.
ADJUSTING THE TILT ANGLE
- Rotate both Tilt Adjustment Levers downwards to unlock the Desktop.
- Apply pressure to the front side of the Desktop to tilt it to the desired angle.
- Rotate both Tilt Adjustment Levers all the way up until to lock the angle of the Desktop.
REMOVING THE BOOK/TABLET STAND
The Book/ Tablet Stand is stored under the Desktop and can be removed by
pulling it outwards. To store, align the bottom of the Book/ Tablet Stand with
the tracks and push in until it clicks in place.
FREE STANDING
Set up the Book/ Tablet Stand anywhere by unfolding the Kickstand on the back
to use as a tripod.
ACCESSORY SLOT
Insert the angled feet at the bottom of the Book/Tablet Stand into the
Accessory Slot.
USING THE PHONE MOUNT
Insert the arm of the Phone Mount into the Bracket attached to the underside of the Desktop.
The Bracket is capable of positioning the Phone Mount at virtually any angle.
Do not try to rotate the Phone Mount while installed in the Bracket.
Remove the Phone Mount completely and re-insert at the desired angle.
TIP: The Phone Mount should be installed so that the phone is slightly leaning backwards to increase the stability of the phone in the mount.
USING THE ACCESSORY SLOT
Virtually any mobile device can be mounted to the top of the TotalDesk™ by inserting it into the Accessory Slot. There is a rubber grip inside the slot to secure devices.
TIP: Insert a charging cable through the Cable Openings at the bottom of the Accessory Slot to charge a device while mounted in the TotalDesk™. (Charging accessories not included).
1-YEAR LIMITED WARRANTY
We stand behind our products! For complete Warranty details please visit:
Limitlesslnnovations.com/Warranty
CONTACT US
Our team is happy to hear from you and is ready to provide prompt and
exemplary customer service. If you have any feedback or questions about your
purchase, please do not hesitate to contact us.
855-843-4828 / Support@Limitlesslnnovations.com
For product information, FAQs, videos, and more, please visit: Limitlesslnnovations.com/Products/TotalDesk
SHARE & REVIEW
Your experience could help the next customer! Please take the time review the
TotalDesk™ to help others with their purchase!
Made in China
Phone: 855-843-4828
Email:
Support@LimitlessInnovations.com
Website: LimitlessInnovations.com
© Limitless Innovations, Inc.