Limitless Innovations Inc LIM-AP4-XXX AirPro Portable Air Compressor User Guide
- October 30, 2023
- Limitless Innovations Inc
Table of Contents
- Limitless Innovations Inc LIM-AP4-XXX AirPro Portable Air Compressor
- Product Technical Specifications
- Product What’s Included
- Product Adapter Compatibility
- Product Control Panel
- Product Usage Instructions
- TECH SPECS
- WHAT’S INCLUDED
- COMPONENTS
- ADAPTER COMPATIBILITY
- CONTROL PANEL
- HOW TO USE
- Contact
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Limitless Innovations Inc LIM-AP4-XXX AirPro Portable Air Compressor
The AirProTM is a portable air compressor that can be used to inflate car, truck, trailer, ATV, and motorcycle tires, as well as bicycle tires, pool tubes, floats, balloons, and toys. The device has a built-in flashlight with three modes: On, S.O.S., and Strobe. The AirProTM comes with various adapters and hoses for different types of inflation needs. The product has a type-C input port for charging and a USB output port for charging other devices.
Product Technical Specifications
- Type-C: 5V/2A (Max)
- USB Output: 5V/2.4A (Max)
- Flashlight: 25 Lumens
- Flashlight Modes: On | S.O.S. | Strobe
- Dimensions: 6.43 x 2.76 x 2.13
- Weight: 0.95 lb
Product What’s Included
- (1) AirProTM
- (1) Storage Bag
- (1) 12 Type-C Charging Cable
- (1) 1-Port USB Car Charger
- (1) 8 Hose
- (1) 24 Hose with Air Chuck
- (1) Inflatable Adapter
- (1) Ball Adapter
- (1) Bike Tire Adapter
Components
The AirProTM has the following components:
- USB Charging Port (Output)
- Flashlight
- Threaded Air Hose Connection
- Type-C Port (Input)
- Exhaust
- Adapter Storage Door
- Adapter Storage Slot
- Control Panel
- Air Compressor Mode
- Digital Display
- Unit of Measurement
Product Adapter Compatibility
- Air Chuck: Cars, Trucks, Trailers, ATVs, Motorcycle Tires & more.
- Inflatable Air Nozzle: Pool Tubes, Floats, Balloons, Toys, etc.
- Ball Pump Needle: Basketballs, Soccer Balls, Footballs, Volleyballs, etc.
- Presta Valve: Bicycle Tires
Product Control Panel
The AirProTM control panel has the following buttons and indicators:
- Power Button (AIR)
- Pump Modes Button (SET)
- Decrease PSI Button (-)
- Increase PSI Button (+)
- Light Modes Button (LED)
- Digital Display for PSI/BAR Indicator and Battery Level
Product Usage Instructions
Powering On The AirProTM
- Press the AIR button to turn the AirProTM on.
- The battery level will illuminate on the Digital Display for 5 seconds.
- The Digital Display will switch to the PSI/BAR indicator. The Car icon and current PSI will illuminate on the Digital Display. The Digital Display will read 0 if nothing is attached to the AirProTM. The default unit of measurement is set to PSI (right).
Note: The AirProTM will automatically shut off after being idle for 60 seconds.
Connecting The Air Hoses
-
1. Screw the end of the 8 Hose into the AirProTM’s Threaded Connection.
- To use the 24 Hose with Air Chuck, you must first attach the 8 Hose to the AirProTM.
Note: The 24 Hose with Air Chuck can be used as an extender to create a 32 hose that works with the Adapters.
Connecting The Adapters
To the 8 Hose:
- Screw the threaded end of the Adapter into the end of the 8 Hose. Do NOT over tighten the Adapter.
To the 24 Hose with Air Chuck:
- Open the Lever of the Air Chuck and insert the threaded end of the Adapter.
- Close the Lever to secure the Adapter in the Air Chuck.
Using The Air Pump
- Power on the AirProTM, adjust the modes, and connect the Air Hoses.
- Once the Digital Display switches to the PSI/BAR Indicator, press and hold the AIR button to activate the air compressor.
- The air compressor will automatically shut off once the preset PSI/BAR level has been met.
TECH SPECS
- Model: LIM-AP4-XXX
- Battery Capacity: 4,000mAh | 3.7V
- Recharging Time (From 0%): ±3 Hours
- Battery Level Display: 5% – 100%
- Type-C: 5V/2A (Max)
- USB Output: 5V/2.4A (Max)
- Max Operating Pressure: 120 PSI / 8.3 bar
- Max Instant Pressure: 150 PSI / 10.3 bar
- Air Pressure Range: 3-150 PSI / .2-10.3 bar
- Range Resolution: 0.5 PSI / 0.05 bar
- Air Pressure Tolerance: ±1.5%
- Product Working Temperature: 32°~104°F (0°~40°C)
- Charge Operating Temperature: 32°~113°F (0°~45°C)
- Discharging Operating Temperature: 14°~140°F (-10°~60°C)
- Flashlight: 25 Lumens
- Flashlight Modes: On | S.O.S. | Strobe
- Dimensions: 6.43” x 2.76“ x 2.13”
- Weight: 0.95 lb
WHAT’S INCLUDED
- A. (1) AirPro™
- B. (1) Storage Bag
- C. (1) 12” Type-C Charging Cable
- D. (1) 1-Port USB Car Charger
- E. (1) 8” Hose
- F. (1) 24” Hose with Air Chuck
- G. (1) Inflatable Adapter
- H. (1) Ball Adapter
- I. (1) Bike Tire Adapter
COMPONENTS
- USB Charging Port (Output)
- Flashlight
- Threaded Air Hose Connection
- Type-C Port (Input)
- Exhaust
- Adapter Storage Door
- Adapter Storage Slot
- Control Panel
- Air Compressor Mode
- Digital Display
- Unit of Measurement
ADAPTER COMPATIBILITY
- Air Chuck
- Cars, Trucks, Trailers, ATVs, Motorcycle Tires & more.
- Inflatable Air Nozzle
- Pool Tubes, Floats, Balloons, Toys, etc.
- Ball Pump Needle
- Basketballs, Soccer Balls, Footballs, Volleyballs, etc.
- Presta Valve
- Bicycle Tires
CONTROL PANEL
- Press: Power AirPro™ On
- Press & Hold (2 Seconds): Activate Air Compressor
- Press: Switch Pump Modes
- Press & Hold (2 Seconds): Switch PSI / BAR
- – Press: Decrease 1 PSI / .1 bar
- Press & Hold: Continual Decrease Until Released
- + Press: Increase 1 PSI / .1 bar
- Press & Hold: Continual Increase Until Released
- Press: Switch Light Modes
- Press & Hold (2 Seconds): Turn Off Without Cycling Through the Light Modes
HOW TO USE
Powering On The AirPro™
Press the AIR button to turn the AirPro™ on.
- The battery level will illuminate on the Digital Display for 5 seconds (below).
- The Digital Display will switch to the PSI/BAR indicator. The Car icon and current PSI will illuminate on the Digital Display. The Digital Display will read “0” if nothing is attached to the AirPro™. The default unit of measurement is set to PSI (right).
Note
- The AirPro™ will automatically shut off after being idle for 60 seconds.
Adjusting the Modes
- Use the SET, +, and – buttons to adjust the PSI/BAR setting to the desired level.
- Refer to the Control Panel instructions (left) and the default settings (below).
DEFAULT SETTINGS
MODE| PSI| BAR
Car| 36| 2.5
Motorcycle| 36| 2.5
Bike| 60| 4.1
Ball| 8| .5
Connecting The Air Hoses
- Screw the end of the 8” Hose into the AirPro™’s Threaded Connection.
- To use the 24” Hose with Air Chuck, you must first attach the 8“ Hose to the AirPro™.
Note: The 24” Hose with Air Chuck can be used as an extender to create a 32” hose that works with the Adapters.
Connecting The Adapters
To the 8” Hose
- Screw the threaded end of the Adapter into the end of the 8” Hose. Do NOT over tighten the Adapter.
To the 24” Hose with Air Chuck
- Open the Lever of the Air Chuck and insert the threaded end of the Adapter.
- Close the Lever to secure the Adapter in the Air Chuck.
Using The Air Pump
- Power on the AirPro™, adjust the modes, and connect the Air Hoses.
- Once the Digital Display switches to the PSI/BAR Indicator, press and hold the AIR button to activate the air compressor.
- The air compressor will automatically shut off once the preset PSI/BAR level has been met.
- Press the AIR button to manually turn off the air compressor at any time.
Notes: When using the air compressor for extended periods of time, It is recommended to allow the unit to cool after 8 minutes has surpassed to prevent over-heating.
Always refer to the manufacturer’s recommended PSI/BAR level for the item being inflated.
Air Compressor Built-In Protection Codes
- E01 | Protection Type: Battery Over-Temperature Protection
- Troubleshooting: Turn off the AirPro™ and allow 10 minutes to cool down.
- E02 | Protection Type: Motor Over-Temperature Protection
- Troubleshooting: Turn off the AirPro™ and allow 10 minutes to cool down.
- E03 | Protection Type: Leakage Protection
- Troubleshooting: Disconnect and reconnect the Air Hose.
Checking the Tire Pressure
- Connect the 8” Hose to the AirPro™.
- Connect the 24” Hose with Air Chuck to the end of the 8” Hose.
- With the Lever open, connect the Air Chuck to the vehicle’s air valve.
- Quickly close the Lever to secure it on the vehicle’s air valve and avoid releasing air from the tire. The Digital Display will illuminate the current PSI.
Using The Flashlight
- Press the LED button once to turn on the Flashlight.
- Single press the LED button to cycle through the light modes.
- Press and hold the LED button for 3 seconds to turn off the Flashlight without cycling through the light modes.
- Light Modes: On | S.O.S. | Strobe
Recharging The AirPro™
- Plug the included 1-Port USB Car Charger into a vehicle’s 12V outlet.
- Plug the included 12” Type-C to USB Charging Cable into the 1-Port USB Car Charger and into the Type-C Port on the AirPro™.
- The AirPro™ will begin to charge.
- The 12” Type-C to USB Charging Cable can be used with any USB power source to recharge the AirPro™ indoors.
Using The Power Bank
- Plug a USB cable into the USB Charging Port and into a device.
- Press the AIR or LED button to power on the AirPro™. The device will begin to charge.
To view the complete user manual, please visit:
All rights reserved. Limitless AirPro™, AirPro™, and Limitless™ are trademarks of Limitless Innovations, Inc. Design and specifications subject to change without notice. Products may vary from images shown. Accessories sold separately.
Contact
- LimitlessInnovations.com
- Support@LimitlessInnovations.com
- (855) 843-4828
Limitless Innovations, Inc.
- 4800 Metalmaster Way McHenry, IL 60050
© Limitless Innovations, Inc.
Designed & Innovated in USA
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>