Klim ULTIMATE RGB Laptop Cooling Pad c

: June 11, 2024
: KLIM

Table of Contents

ULTIMATE RGB Laptop Cooling Pad
User Manual
Product Specifications
Installation and Use
THANK YOU
PRODUCT SPECIFICATIONS
INSTALLATION AND USE
COLORS & EFFECTS
TROUBLESHOOTING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ULTIMATE RGB Laptop Cooling Pad

User Manual

Thank you for acquiring our KLIM Ultimate laptop cooler! We hope that you enjoy this product and that it helps you keep your laptop at an optimal temperature. If you need any help or if you simply want to share your feedback, please contact us at support@klimtechnologies.com. Our specialists reply within 24 hours!

Product Specifications

Dimensions: 425 x 315 x 43 mm
Weight: 960 g
Fan dimensions: 200 x 200 x 18 mm
Maximum fan speed: Not specified
Fan noise: 23 dB
Current: 1.3 A
Voltage: 5 V
Power connection: USB cable
Compatibility: Laptops from 10 to 17 inches
Material: Plastic & metal grille

Installation and Use

Set your preferred inclination by inserting the bracket in the slots. Check that both sides are at the same level.
Place the laptop on the cooling pad and connect the USB cable to the cooling pad and laptop. If needed, lift the frontal tab tokeep it in place.
Turn the speed dial behind the cooler to activate the fan and control its speed.
Use the Light Mode and Color Mode buttons to adjust the colors and effects of the RGB rim.

Troubleshooting

The fan has stopped working

Check that the fan speed dial is turned all the way.
Try connecting the cable to another USB port on your computer or to a wall outlet.

The lights have stopped working

Try connecting the cable to another USB port on your computer or to a wall outlet.

The fan makes too much noise

Check for dust or debris inside the unit.
Clean the fan with an air spray or vacuum cleaner.

THANK YOU

Thank you for acquiring our KLIM Ultimate laptop cooler! We hope that you enjoy this product and that it helps you keep your laptop at an optimal temperature. If you need any help or if you simply want to share your feedback, please contact us at support@klimtechnologies.com. Our specialists reply within 24 hours.

PRODUCT SPECIFICATIONS

Dimensions: 425 x 315 x 43 mm
Weight: 960 g
Fan dimensions: 200 x 200 x 18 mm
Maximum fan speed: 750 ± 10% RPM
Fan noise: 23 dB
Current: 1.3 A
Voltage: 5 V
Power connection: USB cable
Compatibility: 10 to 17-inch laptops
Material: Plastic & metal grid

INSTALLATION AND USE

Set your preferred inclination by inserting the bracket in the slots. Check that both sides are at the same level.
Place the laptop on the cooling pad and connect the USB cable to the cooling pad and laptop. If needed, lift the frontal tab to keep it in place.
Turn the speed dial behind the cooler to activate the fan and control its speed.
Use the Light Mode and Color Mode buttons to adjust the colors and effects of the RGB rim.

COLORS & EFFECTS

Press the Light Mode button: to switch between lighting patterns.
Press the Color Mode button: to switch colors, cycling through red, yellow, green, turquoise, blue, white and purple (available modes only).
The available effects are explained below:
Quick transition: colors change in quick succession. In this mode, the color Mode button is disabled.
Slow transition: 7 colors transition slowly. Press Color Mode while a specific color is being shown to “lock” the color. Press it again to unlock it and return to Slow transition mode.
Breathing mode: lighting turns on and off in a rhythmic pattern Flashing mode: colors will flash on and off at a quicker rhythm
Solid color mode: only 4 colors will be displayed in this mode (red, green). Press Color Mode to switch between these 4 colors.