wickedaudio WI-TW525X Apoc TWS Earbuds User Manual
- June 4, 2024
- wickedaudio
Table of Contents
APOC
Turning Earbuds On/Off
|
---|---
Power On
Removing the earbuds from the charging case automatically turns on the earbuds
and starts the syncing process to one another| Power Off
Placing the earbuds back into the charging case will automatically power them
down
|
Power On (outside of case)
When outside the charging case and powered off, long press both earbuds for
2-3 seconds (Red/Blue LEDs) to turn them on.| Power off (outside of
case)
Long press left or right earbud for 5 seconds to turn off earbuds without
putting them in the case
In the Box
In the Box
Apoc TWS Earbuds
Charging Case
USB to USB-C Charging Cord
3 Sizes of Cushions
Instruction Booklet
Charging
Charging the Charging Case
Using the USB-C charging cable, plug into a power source. While charging the
charging case LED will be flashing RED.
Once fully charged, the LED is solid red.
Charging the Earbuds
Place earbuds in charging case to charge earbuds.
They will turn off and automatically begin charging. While charging the
earbuds, the charging case LED will be solid BLUE. When the earbuds are fully
charged, the charging case LED will shut off. Tip: Earbuds will announce “low
charge” when they are at 10% battery life.
Functions
| |
---|---|---
Pause / Play
Single Press
(Left or Right Earbud)| Next Track
Double Press
(Right Earbud)| Previous Track
Double Press
(Left Earbud)
| |
Volume Up
Long Press
(Right Earbud)| Volume Down
Long Press
(Left Earbud)| Change EQ Modes
Triple Press
(Left or Right Earbud) Note: Default Mode is “Balance Mode”
Note: EQ modes rotate in the following order: Balance, Rock, Enhanced
Bass
PRECAUTIONS
LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE.
USE AS LOW A VOLUME AS POSSIBLE.
Overexposure to excessive sound, levels can damage your ears resulting in
permanent noise-induced hearing loss (NIHL). Please use the following
guidelines established by the Occupational Safety Health Administration
(OSHA) on maximum time exposure to sound pressure levels before hearing damage
occurs.
SAFE USE & HAZARD WARNINGS
90 dB SPL at 8 hours, 95 dB SPL at 4 hours, 100 dB SPL at 2 hours, 105 dB SPL
at 1 hours, 110 dB SPL at 30 min, 115 dB
SPL at 15 min, 120 dB SPL: Avoid as damage may occur
IMPORTANT SAFETY INSTRUCTION
- Read these instructions.
- Keep these instructions.
- Heed all warnings
- Follow all instructions.
Attention should be drawn to the environmental aspects of battery disposal;
The use of apparatus in moderate climates
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Limitation of Liability Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. In no event, under any cause of action of a theory of liability, shall Wicked Audio Inc., its distributors, or suppliers be liable to you or any third party for indirect, incidental, consequential, special, exemplary, or punitive damages, of any and all nature whatsoever, arising out of the use of or inability to use a product. This includes without limitation, property damage, loss of value of the product, or any third-party products that are used in or with the Wicked Audio products, even if the Wicked Audio product has been advised of the possibility of such damages that one may encounter. Without limiting the foregoing, you understand and agree that Wicked Audio has no liability for any damages or destruction to the consumer electronics devices or other personal property that are contained inside or outside the Wicked Audio products. This includes without limitation, laptops, cellular phones, or other hand-held devices, or any loss of data contained on the foreign device. Notwithstanding any damages that you might incur for general damages in contract, tort (including negligence), or otherwise), the entire aggregate liability of Wicked Audio and any of its distributors and/or suppliers shall be limited to the amount actually paid by you for the Wicked Audio product giving rise to liability. Some states and/or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. The limitations of liability set forth above shall apply to the maximum extent permitted under applicable law.
| |
---|---|---
Enter / Exit
Voice Assistant
Four Clicks (Left or Right Earbud)| Answer Call/Hang up Call
Single Press (Left or Right Earbud)| Reject Incoming Call
Long Press 2 Seconds (Left or Right Earbud)
Troubleshooting
Reset
Only one earbud connecting to the device at a time?
Reset
Only one earbud connecting to the device at a time?
- From your device’s Bluetooth menu, delete the “Wicked Apoc” pairing name
- Place earbuds in the charging case.
- Remove the left earbud from the charging case
- Press the Left earbud 2 times (LED will start flashing red) and then press the left earbud 5 more times (LED will go solid red and then turn off)
- Place the Left earbud back into the charging case and remove the Right earbud.
- Repeat Step 4 with the Right earbud.
- Return the Right earbud to the charging case.
- Remove earbuds from the charging case. Earbuds will automatically sync to each other.
- Once synced together you can locate “Wicked Apoc” in your device’s Bluetooth settings.
LEDs
Charging Case Lights when Charging Case:
Flashing Red Solid Red
The case is Charging Full Charge Reached
Charging Case Lights when Charging Earbuds:
Solid Blue Off
Earbuds are Charging Earbuds are fully charged
MODEL #: WI-TW525X
IC: 20526-WITW525X
LIMITED ONE-YEAR WARRANTY
Keep your receipt to obtain warranty service.
Go to www.wickedaudio.com for more details.
Developed in Utah, U.S.A.
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>