premio AIO-W221-ADL 21.5 Inch Full HD Capacitive Touchscreen Computer User Guide
- September 12, 2024
- premio
Table of Contents
- Document Information
- Overview
- Hardware Description
- Set up your Development Environment
- Set up your Hardware
- Setup your AWS account and Permissions
- Create Resources in AWS IoT
- Install the AWS Command Line Interface
- Install AWS IoT Greengrass
- Create a Hello World Component
- Troubleshooting
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**premio AIO-W221-ADL 21.5 Inch Full HD Capacitive Touchscreen Computer User Guide
**
Document Information
- Version 1.0
- Date August 2024
- Description Publish Document
Overview
Introduction
The AIO All In One Industrial Touchscreen Computer offers a slim 21.5” 16:9 HD display while maintaining a rugged IP65 Front Panel Display with 7H glass for industrial-grade durability. The AIO Series is powered by Premio’s CT-DAL01 Single Board Computer with Intel 12th Generation Alder Lake. Intel’s Alder Lake-N represents the latest in entry level processors, designed for low power, efficient throughput and multi-core performance. Using the same Gracemont CPU architecture found in the Efficiency cores in 12th/13th Generation Intel Core CPUs, the Alder Lake-N processors boosts the performance over previous entry level processors from Intel by up to 28%, and provides power efficiency in a low TDP design.
About AWS IoT Greengrass
To learn more about AWS IoT Greengrass, see how it works and what’s new.
Hardware Description
Data Sheet
Click on this link to view the datasheet of AIO-W221-2L-N97-P
Additional Hardware References
Please refer to the AIO-W221-2L-N97-P device page for more product details
User Provided Items
Not applicable.
3rd Party Purchasable Items
Not applicable.
Set up your Development Environment
AWS IoT Greengrass supports both Windows and Linux:
Please refer to the developer guide for the required tools and proper setup:
https://docs.aws.amazon.com/greengrass/v2/developerguide/what-is-iot- greengrass.html
It is recommended to install the following tools/SDKs:
- Java Runtime Environment (JRE) version 8 or greater
- Java Development Kit (JDK) Amazon Corretto 11 (https://aws.amazon.com/corretto/) or OpenJDK 11 (https://openjdk.java.net/)
- GNU C Library (https://www.gnu.org/software/libc/); (glibc) version 2.25 or greater
Set up your Hardware
Please refer to the device User’s Manual for the hardware setup.
Setup your AWS account and Permissions
Refer to the online AWS documentation at Set up your AWS Account:
https://docs.aws.amazon.com/iot/latest/developerguide/setting-up.html
Follow the steps outlined below to create your account and user to get started:
-
Sign up for an AWS account:
https://docs.aws.amazon.com/iot/latest/developerguide/setting-up.html#aws- registration -
Create a user and grant it the proper permissions:
https://docs.aws.amazon.com/iot/latest/developerguide/setting-up.html#create- iam-user -
Open the AWS IoT console:
https://docs.aws.amazon.com/iot/latest/developerguide/setting-up.html#iot- consolesignin
Create Resources in AWS IoT
Refer to the instructions on how to create AWS IoT resource:
https://docs.aws.amazon.com/iot/latest/developerguide/create-iot-
resources.html
Follow the steps outlined in these sections to provision resources for your device:
- Create an AWS IoT Policy
- Create a thing object
Install the AWS Command Line Interface
To install the AWS CLI on your host machine, refer to the instructions:
https://docs.aws.amazon.com/cli/latest/userguide/getting-started-
install.html
Installing the CLI is required to complete the instructions in this guide.
Once you have installed AWS CLI, configure it per the instructions:
https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-
quickstart.html#cliconfigure-quickstart-config
Set the appropriate values for access key ID, secret access key, and AWS Region based on your AWS account. You can set Output format to “js on” if you prefer
Install AWS IoT Greengrass
Follow the online guide to Install with automatic provisioning. Refer to the instructions in the following steps:
Set up the device environment Provide AWS credentials to the device. For development environments, you can use the option “Use long-term credentials from an IAM User”. An example of how to do this is shown below: export AWS_ACCESS_KEY_ID= export AWS_SECRET_ACCESS_KEY=
Download the AWS IoT Greengrass Core
software
Install the AWS IoT Greengrass Core
software
Create a Hello World Component
In AWS IoT Greengrass v2, components can be created on the edge device and uploaded to the cloud, or vice versa.
To create, deploy, test, update and manage a simple component on your device,
follow the instructions under the section “To Create a Hello World Component”:
https://docs.aws.amazon.com/greengrass/v2/developerguide/getting-
started.html
To upload the component to the cloud, follow the instructions under the
section “Upload Your Component”:
https://docs.aws.amazon.com/greengrass/v2/developerguide/upload-
firstcomponent.html
Deploy your component
Follow the instructions online at Deploy your Component to deploy and verify that your component is running
Troubleshooting
For AWS IoT Greengrass general troubleshooting tips, please refer to:
https://docs.aws.amazon.com/greengrass/v2/developerguide/troubleshooting.html
For device specific troubleshooting guide, please contact us directly at
techsupport@premioinc.com.
References
- OpenJDK Download - Corretto - AWS
- OpenJDK
- The GNU C Library - GNU Project - Free Software Foundation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>