HYDRAULIC CH-60, CH-70 Hole Punching Tool Instruction Manual
- August 11, 2024
- HYDRAULIC
Table of Contents
HYDRAULIC CH-60, CH-70 Hole Punching Tool
Product Information
Specifications
- Model: CH-60, CH-70
- Material: Copper, Steel
- Tonnage: 10mm (CH-60), 12mm (CH-70)
- Throat Depth: 31mm (CH-60), 35mm (CH-70)
- Weight: 95kg (CH-60), 110kg (CH-70)
- Dies Thickness: 6mm (CH-60), 8mm (CH-70)
- Dispositions: 10.5mm, 13.8mm, 17.5mm, 20.5mm
Product Usage Instructions
-
Step 1: Preparation
Ensure the hand pump is filled with 15# mechanical oil. Use a 200# filtration net to filter the oil before injecting it to prevent impurities. -
Step 2: Connection
Connect the hose to the hydraulic hole puncher using the quick connectors. -
Step 3: Punching
Place the material to be punched under the machine tool. Operate the hand pump or connect a 70MPA electric pump for punching holes in angle steel, flat steel, or other materials. -
Step 4: Maintenance
After use, clean the machine and store it in a dry place to prevent corrosion.
FAQs
-
Q: What type of oil should be used for the hand pump?
- A: Use 15# mechanical oil for the hand pump, ensuring it is filtered through a 200# filtration net to avoid impurities.
-
Q: Can this tool be used with an electric pump?
- A: Yes, this tool can also be used with a 70MPA electric pump for punching holes in various materials.
Hydraulic Hole Puncher
OPERATION INSTRUCTION
Model
- CH-60
- CH-70
Introduction
Split-unit hydraulic hole puncher is combined with hand pump and machine tools. The hose is connected by quick connectors. It has the advantages of reliable seal, no limited work direction, easy installation and disassembly. It is specialized for angle steel, flat steel and other material’s hole punching, especially for electrically and electric power building and other industry’s filed operation.
Specification
Model| Copper Thickness| Steel Thickness| Tonnage (T)| Throat Deep(mm)| Weight
(kg)| Dies Disposition (Ф mm)
---|---|---|---|---|---|---
CH-60| 10mm| 6| 31| 95| 18| 10.5,13.8,17.5
20.5
CH-70| 12mm| 8| 35| 110| 36| 10.5,13.8,17.5
, 20.5
Remark
- Add 15# mechanical oil when the hand pump empty absorbed. The injected oil must be filtrated by 200# filtration net, in order to avoid the interfusion of impurity.
- This tool also can be used with 70MPA eclectic pump.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>